Journal of Electrical Engineering and Technology

  • 제8권2호
  • /
  • Pages.345-353
  • /
  • 2013
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Surface Tracking of Micro and Nano Size Alumina Filled Silicone Rubber for High Voltage AC Transmission

  • Loganathan, N. (Dept. of Electrical and Electronic Engineering, K.S.Rangasamy College of Technology) ;
  • Chandrasekar, S. (Dept. of Electrical and Electronic Engineering, Gnanmani College of Engineering)
  • 투고 : 2012.02.04
  • 심사 : 2012.08.11
  • 발행 : 2013.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper discusses the experimental results in an effort to understand the tracking and erosion resistance of the micro and nano size $Al_2O_3$ filled silicone rubber (SIR) material which has been studied under the AC voltages, with ammonium chloride as a contaminant, as per IEC 60587 test procedures. The characteristic changes in the tracking resistance of the micro and nano size filled specimens were analyzed through leakage current measurement and the eroded masses were used to evaluate the relative erosion and tracking resistance of the composites. The fundamental, third and fifth harmonic of the leakage current during the tracking study were analyzed using moving average current technique. It was observed that the harmonic components of leakage current show good correlation with the tracking and erosion resistance of the material. The thermogravimetry-derivative thermo gravimetric (TG-DTG) studies were performed to understand the thermal degradation of the composites. The physical and chemical studies were carried out by using scanning electron microscope (SEM), Energy Dispersive X-ray analysis (EDAX) and Fourier Transform Infra-red (FTIR) Spectroscopy. The obtained result indicated that the performance of nano filled SIR was better than the micro filled SIR material when the % wt. of filler increased.

키워드

참고문헌

  1. Goru R.S; Cherney.E.A; and Burnham. J.T; "Outdoor Insulators" (Ravi S. Gorur, Inc., 1999).
  2. Meyer L.H; "Tracking and Erosion Resistance of RTV Silicone Rubber: Effect of Filler Particle Size and Loading", IEEUPES Transmission & Distribution Conference & Exposition: Latin America, pp. 453-456, 2004.
  3. Meyer L.H; Cherney E.A; and Jayaram S.H; "The Role of Inorganic Fillers in Silicone Rubber for Outdoor Insulation Alumina Tri-Hydrate or Silica", IEEE Electrical Insulation Magazine Vol. 20, No. 4, pp. 13-21 July/August 2004
  4. El-Hag A.H; Simon L.C; Jayaram S.H; and Cherney E.A; "Erosion resistance of nano filled silicone rubber", IEEE Transactions on Dielectrics and Electrical Insulation Vol. 13, No. 1, pp. 122-128, February 2006. https://doi.org/10.1109/TDEI.2006.1593410
  5. IEC publication 60-587. "Testing method for evaluating the resistance of tracking and erosion of electrical insulating materials used under severe ambient conditions", 1984.
  6. Sarathi. R; Chandrasekar. S; and Yoshimura. N; "Investigations into the Surface Condition of the Silicone Rubber Insulation Material using Multiresolution Signal Decomposition", IEEE Transactions on Power Delivey, Vol. 21, No. 1, pp. 243-252, Jan 2006. https://doi.org/10.1109/TPWRD.2005.855440
  7. Chandrasekar. S; Prabhu. S; Krishnamoorthi. K; and Sarathi. R; "Analysis of surface condition of polymeric insulation structure using wavelet packet transform", Proceedings of International conference on Power systems (ICPS'07), Dec 2007, CPRI, Bangalore.
  8. Chandrasekar. S; Prabhu. S; Karthikeyan. S; Satheesh kumar. K; and Sarathi. R; "Analysis of Surface Tracking of Outdoor Polymeric Insulators Using STransform", National conference on Electrical engineering and Embedded systems, NCEE'08, pp. 175-179, 20-21 Mar 2008. College of Engineering Guindy, Anna University, Chennai.
  9. Deng. H; Chemey. E.A; and Hackam. R; "Effects of Particles Size of ATH Filler on The Performance of RTV rubber coatings", Electrical Insulation and Dielectric Phenomena, Annual Report, Conference on 17-20, pp. 598-604, Oct 1993.
  10. Gorur. R. S; Cherney. E. A; and Hackam. R; "Performance of polymeric insulating materials in salt Fog", IEEE Transactions on power delivery, Vol. 2, No. 2. pp. 486-492, April 1987.
  11. Kochetov. R; Andritsch. T; Lafont. U; Morshuis. P. H. F; and Smit. J. J; "Effects of Inorganic Nano fillers and Combinations of them on the Complex Permittivity of Epoxy-based Composites", Electrical Insulation (ISEI), Conference Record of the 2010 IEEE International Symposium. pp. 1-5, June 2010.
  12. Zhanhu Guo; Tony pererira; Oyoung Choi; Ying Wang; and Thomas Hahn.H; "Surface functionalized alumina nano particle filled polymeric nano composites with enhanced mechanical properties", Journal of Materials chemistry June 2006, 16, pp. 2800-2808. https://doi.org/10.1039/b603020c
  13. Mansab Ali; and Reuben Hackam; "Recovery of hydrobhobicity of HTV silicone rubber after Accelerated aging in saline solutions", IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 16, No.3; pp. 842-852 June 2009. https://doi.org/10.1109/TDEI.2009.5128525
  14. Thong-om. S; Payakcho. W; Grasasom. J; and Marungsri. B; "Study of Ageing Deterioration of Silicone Rubber Housing Material for Outdoor Polymer Insulators", World Academy of Science, Engineering and Technology, pp. 533-539, 2011.
  15. Parimal Maity; Subramanyam.V; Kasisomayajula; Venkitanarayanan Parameswara; Sumit Basu; and Nandini Gupta; "Improvement in surface degradation properties of polymer composites due to preprocessed Nanometric Alumina Fillers", IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 15, No. 1, pp. 63-72, February 2008. https://doi.org/10.1109/T-DEI.2008.4446737
  16. Venkatesulu. B; and Joy Thomas. M; "Tracking and Erosion Resistance of Nano-Filled Silicone Rubber for use in High Voltage Outdoor Insulators", 16th national power systems conference, 15th-17th, pp. 562-566, December, 2010.
  17. Tiebin Zhao and Allebn Brnstorf.R; "Ageing Tests of Polymeric Housing Materials for Non-Ceramic Insulators", IEEE Electrical Insulation Magazine Vol. 14, No. 3, pp. 26-33, March-April 1998. https://doi.org/10.1109/57.662784
  18. Deng. H; Chemey. E.A; and Hackam. R; "Effects of Particles Size of ATH Filler on The Performance of RTV Rubber coatings", Electrical Insulation and Dielectric Phenomena, Annual Report, Conference on 17-20, pp. 598-604, Oct 1993.

피인용 문헌

  1. Tracking/Erosion Resistance Analysis of Nano-Al(OH)3Filled Silicone Rubber Insulating Materials for High Voltage DC Applications vol.10, pp.1, 2015, https://doi.org/10.5370/JEET.2015.10.1.355
  2. Comparative study of SiR/EPDM containing nano-alumina and titanium dioxides in electrical surface tracking vol.24, pp.5, 2017, https://doi.org/10.1109/TDEI.2017.006414