Journal of Electrical Engineering and Technology

  • 제8권2호
  • /
  • Pages.223-229
  • /
  • 2013
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Value-based Distributed Generation Placements for Reliability Criteria Improvement

  • Heidari, Morteza (Department of Electrical and Robotic Engineering, Shahrood University of Technology) ;
  • Banejad, Mahdi (Department of Electrical and Robotic Engineering, Shahrood University of Technology)
  • 투고 : 2011.11.06
  • 심사 : 2012.09.13
  • 발행 : 2013.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Restructuring and recent developments in the power system and problems arising from construction and maintenance of large power plants, increasing amount of interest in distributed generation (DG) source. Distributed generation units due to specifications, technology and location network connectivity can improve system and load point reliability indices. In this paper, the allocation and sizing of DG in distribution networks are determined using optimization. The objective function of the proposed method is to improve customer-based reliability indices at lowest cost. The placement and size of DGs are optimized using a Genetic Algorithm (GA). To evaluate the proposed algorithm, 34-bus IEEE test system, is used. The results illustrate efficiency of the proposed method.

키워드

참고문헌

  1. Weixing Li, Peng Wang, Zhimin Li, and Yingchun Liu "Reliability Evaluation of Complex Radial Distribution Systems Considering Restoration Sequence and Network Constraints", IEEE Transaction on Power Delivery, Vol. 19, Issue 2, pp. 753-758, April 2004. https://doi.org/10.1109/TPWRD.2003.822960
  2. C.Wang, M.H. Nehrir, "Analytical Approaches for Optimal Placement of Distributed Generation Sources in Power Systems", IEEE Transactions on Power Systems, Vol. 19, Issue 4, pp. 2068-2076, November 2004. https://doi.org/10.1109/TPWRS.2004.836189
  3. G. Celli, E. Ghiani, S. Mocci, F. Pilo, "A Multi Objective Evolutionary Algorithm for the Sizing and Siting of the Distributed Generation", IEEE Transactions on Power Systems, Vol. 20, Issue 2, pp. 750-757, May 2005. https://doi.org/10.1109/TPWRS.2005.846219
  4. G. Carpinelli, G. Celli, S. Mocci, F. Pilo, A. Russo, "Optimisation of Embedded Generation Sizing and Siting by Using a Double Trade-Off Method", IEEE Proceedings of Generation, Transmission and Distribution, Vol. 152, Issue 4, pp. 503-513, July 2005. https://doi.org/10.1049/ip-gtd:20045129
  5. H. Hedayati, S. A. Nabaviniaki, A. kbarimajd, "A Method for Placement of DG Units in Distribution Networks", IEEE Transactions on Power Delivery, Vol. 23, Issue 3, pp. 1620-1628, July 2008. https://doi.org/10.1109/TPWRD.2007.916106
  6. D. Singh, K. S. Verma, "Multi Objective Optimization for DG Planning with Load models", IEEE Transactions on Power Systems,Vol. 24, Issue 1, pp. 427-436, February 2009. https://doi.org/10.1109/TPWRS.2008.2009483
  7. M. R. Haghifam, H. Falaghi, O. P. Malik, "Risk- Based Distributed Generation Placement", IET Generation, Transmission and Distribution, Vol. 2, Issue 2, pp. 252-260, March 2008. https://doi.org/10.1049/iet-gtd:20070046
  8. Soo-Hyoung Lee, Jung-Wook Park, "Selection of Optimal Location and Size of Multiple Distributed Generators by Using Kalman Filter Algorithm", IEEE Transactions on Power Systems, Vol. 24, Issue 3, pp. 1393-1400, August 2009. https://doi.org/10.1109/TPWRS.2009.2016540
  9. R. A. Jabr, B. C. Pal, "Ordinal Optimization Approach for Locating and Sizing of Distributed Generation", IET Generation, Transmission and Distribution, Vol. 3, Issue 8, pp. 713-723, August 2009. https://doi.org/10.1049/iet-gtd.2009.0019
  10. L. Wang, C. Singh, "Reliability-Constrained Optimum Placement of Reclosers and Distributed Generators in Distribution Networks Using an Ant Colony System Algorithm", IEEE Transactions on Systems, Man, And Cybernetics-Part C: Applications and Reviews, Vol. 38, Issue 6, pp. 757-764, November 2008. https://doi.org/10.1109/TSMCC.2008.2001573
  11. H. Falaghi, M.R Haghifam, "Distributed Generation Impacts on Electric Distribution Systems Reliability: Sensitivity Analysis", EUROCON 2005.
  12. I. Ziari, G. Ledwich, A. Ghosh, D. Cornforth, M. Wishart, "Optimal Allocation and Sizing of DGs in Distribution Networks", PES General Meeting 2010, USA.
  13. F.LI, N.SABIR "Monte Carlo Simulation to Evaluate the Reliability Improvement with DG connected to Distribution Systems", 8th WSEAS International Conference on Electric power systems,high voltage, electricmachines (POWER '08)
  14. Kersting,W.H., Las Cruces, NM "Radial Distribution Test Feeders", IEEE Transactions on Power Systems, Vol. 6, Issue 3, Aug.1991.
  15. C. L. T. Borges, D. M. Falcao, "Optimal Distributed Generation Allocation for Reliability, Losses and Voltage Improvement", International Journal of Electrical Power and Energy Systems, Vol. 28, Issue 6, pp. 413-420, July 2006. https://doi.org/10.1016/j.ijepes.2006.02.003
  16. R. Billinton, R. N. Allan, Reliability Evaluation of Engineering Systems - Concepts and Techniques, Plenum Press, New York, 1983.
  17. Willis HL, Scott WG., Distributed power generationplanning and evaluation, New York, Marcel Dekker Inc; 2000.
  18. Jen-Hao Teng, Yi-Hwa Liu, Chia-Yen Chen, Chi-Fa Chen, "Value-based distributed generator placements for service quality improvements", Electrical Power and Energy Systems, Vol. 29, Issue 3, pp. 268-274, March 2007. https://doi.org/10.1016/j.ijepes.2006.07.008
  19. Australian Energy Regulator, "Proposed: Electricity distribution network service providers: Service target performance incentive scheme" February 2009, Available online http://www.aer.gov.au, accessed 10/09/ 2009.

피인용 문헌

  1. A literature review on estimating of PV-array hourly power under cloudy weather conditions vol.63, 2016, https://doi.org/10.1016/j.rser.2016.05.027