참고문헌
- EPRI, 2004, "Materials Reliability Program : Welding Residual and Operating Stresses in PWR Alloy 182 Butt Welds (MRP-106)," EPRI Report.
- Moffat, G., Bamford, W. H. and Seeger, D., 2001, "Development of the Technical Basis for Plant Startup for the V.C Summer Nuclear Plant," Trans. of ASME PVP conference, PVP-Vol. 427, pp. 33-39
- Anderson, M. T., Rudland, D., Zhang, T. and Wilkowski, G. M., 2008, "Final Report-Inspection Limit Confirmation for Upper Head Penetration Nozzle Cracking," U.S. Department of Energy, pp. 1-22.
- Rudland, D., Chen, Y., Zhang, T., Wilkowski, G., Broussard, J. and White, G., 2007, "Comparison of Welding Residual Stress Solutions for Control Rod Drive Mechanism Nozzles," Trans. of ASME PVP conference, PVP2007-26045, pp. 1-15.
- Cheng, W., Rudland, D., Wilkowski, G. and Norris, W., 2005, "Effects Of Weld Geometry On Residual Stress and Crack Driving Force For Centerhole Control Rod Drive Mechanism Nozzles - Part I Weld Residual Stress," Trans. of ASME PVP conference, PVP2005-71077, pp. 1-6.
- Brust, F. W. and Scott, P. M., 2007, "Weld Residual Stresses and Primary Water Stress Corrosion Cracking in Bimetal Nuclear Pipe Welds," Trans. of ASME PVP conference, PVP2007-26297.
- Brust, F. W. and Scott, P., 2007, "Primary Water Stress Corrosion Cracking (PWSCC) in Bimetal Nuclear," Trans. of SMiRT 19 conference.
- Fox, M., 1979, "An Overview of Intergranular Corrosion Cracking in BWRs," Journal of materials in energy system, 1:3.
- Yaghi, A., Gyde, T. H., Becker, A. A., Sun, W. and Williams, J. A., 2006, "Residual Stress Simulation in Thin and Thick-Walled Stainless Steel Pipe Welds Including Pipe Diameter Effects," Int. J. of Pressure Vessels and Piping, Vol. 83, pp. 864-874. https://doi.org/10.1016/j.ijpvp.2006.08.014
- Brickstad, B. and Josefson, B. L., 1998, "A Parametric Study of Residual Stresses in Multi-Pass Butt-Welded Stainless Steel Pipes," Int. J. of Pressure Vessels and Piping, Vol. 75, pp.11-25. https://doi.org/10.1016/S0308-0161(97)00117-8
- U.S. Nuclear Regulatory Commission, 1992, "Technical Report on Material Selection and Processing Guidelines for BWR Coolant Pressure Boundary Piping-Final Report," NUREG-0313, Revision 2.
- Abel, J.S., Titrington, J., Jordan, R., Porowski, J. S., O'Donnell, W. J., Badlani, M. L. and Hampton, E. J., 1988, "Mechanical Methods of Improving Resistance to Stress Corrosion Cracking in BWR Piping Systems," Int. J. of Pressure Vessels and Piping, Vol.34, pp.17-29. https://doi.org/10.1016/0308-0161(88)90039-7
- Edwards, N. W., 1986, "Weld Overlay of BWR Flawed Piping," Int. J. of Pressure Vessels and Piping, Vol. 25, pp.17-24. https://doi.org/10.1016/0308-0161(86)90090-6
- Bae, H. Y., Kim, J. H., Kim, Y. J., Oh, C. Y., Kim, J. S., Lee, S. H. and Lee, K. S., 2012, "Sensitivity Analysis of Finite Element Parameters for Estimating Residual Stress of J-groove weldment in RPV CRDM Penetration Nozzle," Trans. Korean Soc. Mech. Eng. A, Vol. 10.
- ASME B&PV Committee, 1998, ASME B&PV Code Case Section III Division 1 NB-4000, p. 193.
- Combustion Engineering, Inc., 1981, Analytical Report for Korea Nuclear Unit No. 5 Reactor Vessel, CENC-1466, pp. 1403-1488.
- Kim, J. S., Jin, T. Dong, E. and Prager, P., 2003, "Development of Residual Stress Analysis Procedure for Fitness-For-Service Assessment of Welded Structure," Trans. Korean Soc. Mech. Eng. A, Vol. 27, pp. 713-723. https://doi.org/10.3795/KSME-A.2003.27.5.713
- ABAQUS, 2003, ABAQUS Standard/User's Manual, version 6.9, Hibbit Karlsson & Sorensen, Inc.
- Song, T. K., Bae, H. Y., Kim, Y. J., Lee, K. S. and Park, C. Y., 2008, "Sensitivity Analyses of Finite Element Method for Estimating Residual Stress of Dissimilar Metal Multi-Pass Weldment in Nuclear Power Plant," Trans. Korean Soc. Mech. Eng. A, Vol. 32, pp. 770-781. https://doi.org/10.3795/KSME-A.2008.32.9.770
- ASME B&PV Committee, 2008, ASME B&PV Code Sec. II, PART A, B, C.
- Special Metals, 2008, Inconel Alloy 600, Special Metals Corporation Publication, No. SMC-207, September.
- ASME B&PV Committee, 2007, ASME B&PV Code Sec. III, Appendices.
- Cheng, W., Rudland, D., Wilkowski, G. and Norris, W., 2005, "Effects Of Weld Geometry On Residual Stress and Crack Driving Force For Centerhole Control Rod Drive Mechanism Nozzles - Part I Weld Residual Stress," Trans. of ASME PVP Conference, PVP2005-71077, pp. 1-6.
- Rudland, D., Wilkowski, G., Wang, Y. and Norris, W., 2004, "Development of Circumferential Through- Wall Crack K-Solutions for Control Rod Drive Mechanism Nozzles," Int. J. of Pressure Vessels and Piping 81, pp. 961-971 https://doi.org/10.1016/j.ijpvp.2004.04.003
- ASME, 2006, "Alternative Examination Requirements for PWR Reactor Vessel Upper Head with Nozzle Having Pressure-Retaining Partial- Penetration Welds," ASME Boiler and Pressure Vessel Code, Sec. XI, Code Case N-721-1, The American Society of Mechanical Engineers, New York
피인용 문헌
- Effects of Repair Weld of Reactor Pressure Vessel Upper Head Control Rod Drive Mechanism Penetration Nozzle on J-Groove Weldment Using Finite Element Analysis vol.38, pp.6, 2014, https://doi.org/10.3795/KSME-A.2014.38.6.637