DOI QR코드

DOI QR Code

Seismic interactions between suspended ceilings and nonstructural partition walls

  • Huang, Wen-Chun (Department of Civil Engineering and Applied Mechanics, McGill University) ;
  • McClure, Ghyslaine (Department of Civil Engineering and Applied Mechanics, McGill University) ;
  • Hussainzada, Nahidah (Department of Civil Engineering and Applied Mechanics, McGill University)
  • 투고 : 2013.08.01
  • 심사 : 2014.02.14
  • 발행 : 2013.12.25

초록

This study aims at observing the coupling behaviours between suspended ceilings and partition walls in terms of their global seismic performance using full-scale shake table tests. The suspended ceilings with planar dimensions of $6.0m{\times}3.6m$ were tested with two types of panels: acoustic lay-in and metal clip-on panels. They were further categorized as seismic-braced, seismic-unbraced, and non-seismic installations. Also, two configurations of 2.7 m high partition wall specimens, with C-shape and I-shape in the plane layouts, were tested. In total, seven ceiling-partition-coupling (CPC) specimens were tested utilizing a unidirectional seismic simulator. The test results indicate that the damage patterns of the tested CPC systems included failure of the ceiling grids, shearing-off of the wall top railing, and, most destructively, numerous partial detachments and falling of the ceiling panels. The loss of panels was mostly concentrated near the center of the tested partition wall. The testing results also confirmed that the failure mode of the non-seismic CPC systems was brittle: The whole system would collapse suddenly all at once when the magnitude of the inputs hit the capacity threshold, rather than displaying progressive damage. Overall, the seismic capacity of the unbraced and braced CPC systems could be up to 1.23 g and 2.67 g, respectively; these accelerations were both achieved at the base of the partition wall. Nonetheless, for practical applications, it is noteworthy that the three-dimensional nature of seismic excitations and the size effect of the ceiling area are parameters that exacerbate the CPC's seismic response so that their actual capacity may be dramatically decreased, leading to important losses even in moderate seismic events.

키워드

참고문헌

  1. ASCE (2010), Minimum design loads for buildings and other structures, ASCE/SEI 7-10, ASCE, Reston, VA, USA.
  2. ASTM (2011), Standard practice for application of ceiling suspension systems for acoustical tile and lay-in panels in areas subject to earthquake ground motions, ASTM E580M-11b, ASTM International, West Conshohocken, PA, USA.
  3. Atkinson, G.M. and Beresnev, I.A. (1998), "Compatible ground-motion time histories for new national seismic hazard maps", Can. J. Civil Eng., 25(2), 305-318. https://doi.org/10.1139/l97-094
  4. Canadian Standards Association (2011), Standard for seismic risk reduction of operational and functional components for buildings, CSA-S832-06(R2011), Rexdale, ON, Canada.
  5. Fierro, E.A., Perry, C.L. and Freeman, S.A. (1994), Reducing the risks of nonstructural earthquake damage - A practical guide, The Federal Emergency Management Agency (FEMA), Washington, DC, USA.
  6. Filiatrault, A., French, S., Holmes, W., Hutchinson, T., Maragakis, E. and Reitherman, R. (2011), "Research on the seismic performance of nonstructural vomponents", Proceedings of the 2011 Architectural Engineering Conference, Oakland, California, USA, March.
  7. Filiatrault, A., Kuan, S. and Tremblay, R. (2004), "Shake table testing of bookcase - partition wall systems", Can. J. Civil Eng., 31(4), 664-676. https://doi.org/10.1139/l04-031
  8. Foo, S., Ventura, C. and McClure, G. (2007), "An overview of a new canadian standard on the seismic risk reduction of operational and functional components of buildings", Proceedings of the 9th Canadian Conference on Earthquake Engineering, Ottawa, ON, Canada, June.
  9. Gilani, A.S.J., Reinhorn, A.M., Glasgow, B., Lavan, O. and Miyamoto, H.K. (2010), "Earthquake simulator testing and seismic evaluation of suspended ceilings", J. Archit. Eng. - ASCE, 16(2), 63-73. https://doi.org/10.1061/(ASCE)1076-0431(2010)16:2(63)
  10. Gilles, D. and McClure, G. (2008), "Development of a period database for buildings in Montreal using ambient vibrations", Proceedings of the 14th World Conference on Earthquake Engineering (14WCEE), Beijing, China, October.
  11. Http://www.gypsum.org/
  12. Http://tw.news.yahoo.com/lightbox/南投6-1 强震-slideshow/好像921-30 秒4 級震動-台中驚嚇破表-photo-004407109.html
  13. Huang, W.C., Hussainzada, N. and McClure, G. (2013), "Experimental study on the seismic behaviour of suspended ceilings", Proceedings of the Canadian Society for Civil Engineering (CSCE) 3rd Specialty Conference on Disaster Prevention and Mitigation, Montreal, QC, Canada, May.
  14. Huang, W.C., McClure, G. and Yao, G.C. (2010), "Shake table testing on moveable office partitions without top restraint", Proceedings of the 9th US National and 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders, EERI and CAEE, Toronto, ON, Canada, July.
  15. ICC-ES (2010), Acceptance criteria for seismic certification by shake-table testing of nonstructural components, AC156, ICC-ES, Whittier, CA, USA.
  16. Jaimes, M.A., Reinoso, E. and Esteva, L. (2013), "Seismic vulnerability of building contents for a given occupancy due to multiple failure modes", J. Earthq. Eng., 17(5), 658-672. https://doi.org/10.1080/13632469.2013.771588
  17. Lee, T., Kato, M., Matsumiya, T., Suita, K. and Nakashima, M. (2007), "Seismic performance evaluation of non-structural components: crywall partitions", Earthq. Eng. Struct. D., 36(3), 367-382. https://doi.org/10.1002/eqe.638
  18. Loh, C.H. and Tsay, C.Y. (2001), "Responses of the earthquake engineering research community to the Chi-Chi (Taiwan) earthquake", Earthq. Spectra, 17(4), 635-656. https://doi.org/10.1193/1.1430680
  19. McMullin, K. and Merrick, D. (2007), "Seismic damage thresholds for Gypsum Wallboard partition walls", J. Archit. Eng., 13(1), 22-29. https://doi.org/10.1061/(ASCE)1076-0431(2007)13:1(22)
  20. Retamales, R., Mosqueda, G., Filiatrault, A. and Reinhorn, A.M. (2011). "Testing protocol for experimental seismic qualification of distributed nonstructural systems", Earthq. Spectra, 27(3), 835-856. https://doi.org/10.1193/1.3609868
  21. Retamales, R., Davies, R., Mosqueda, G. and Filiatrault, A. (2013), "Experimental seismic fragility of cold-formed steel framed Gypsum partition walls", J. Struct. Eng. - ASCE, 139(8), 1285-1293. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000657
  22. Ryu, K.P., Reinhorn, A.M. and Filiatrault, A. (2012), "Full scale dynamic testing of large area suspended ceiling system", Proceedings of 15th world conference on earthquake engineering (15WCEE), Lisbon, Portugal, September.
  23. Shin, T.C. and Teng, T.L. (2001), "An overview of the 1999 Chi-Chi, Taiwan", Earthquake Bulletin of the Seismological Society of America, 91(5), 895-913.
  24. Yao, G.C. (2000), "Seismic performance of direct hung suspended ceiling systems", J. Archit. Eng. - ASCE, 6(1), 6-11. https://doi.org/10.1061/(ASCE)1076-0431(2000)6:1(6)

피인용 문헌

  1. Performance evaluation of suspended ceiling systems using shake table test vol.58, pp.1, 2016, https://doi.org/10.12989/sem.2016.58.1.121
  2. Rigid block coupled with a 2 d.o.f. system: Numerical and experimental investigation vol.9, pp.6, 2013, https://doi.org/10.12989/csm.2020.9.6.539