DOI QR코드

DOI QR Code

A Fundamental Study on the Development of a Variable Preload Device Using Toggle Joint Mechanism

토글 조인트장치를 이용한 가변예압장치 개발을 위한 기초 연구

  • Choi, Chi Hyuk (R&D Cluster, Changwon National Univ.) ;
  • Cha, Na Hyeon (Department of Mechanical Design & Manufacturing Engineering, Changwon National Univ.) ;
  • Lee, Choon Man (Department of Mechanical Design & Manufacturing Engineering, Changwon National Univ.)
  • 최치혁 (창원대학교 R&D 클러스터사업단) ;
  • 차나현 (창원대학교 기계설계공학과) ;
  • 이춘만 (창원대학교 기계설계공학과)
  • Received : 2013.01.11
  • Accepted : 2013.01.15
  • Published : 2013.03.01

Abstract

To increase the machine accuracy by improving the stiffness of spindle bearings, preload was applied to the spindle bearings. The methods of fixed position preload, convertible preload, constant pressure preload, and variable preload are used to apply the preload to the spindle bearing. The previous studies performed by the author of this study were variable preload methods using rubber pressure and centrifugal force based on mechanical systems. This study proposed a toggle joint mechanism that could be applied to variable preload method using centrifugal force and rubber pressure to increase the preload. Also, a finite element analysis was conducted to predict the deformation of the rubber and change of the preload. And the analysis results showed that the preload by the device using rubber pressure only was increased by the toggle joint mechanism using rubber pressure.

Keywords

References

  1. Harnoy, A., "Bearing Design in Machinery," Marcel Dekker, pp. 418-436, 2003.
  2. Kim, C. H. and Choi, D. H., "A study on the determination of the optimal preload about the miniature ball bearing for the VHS VTR head drum assembly," Transactions of the Korean Society of Mechanical Engineers, Vol. 15, No. 2, pp. 703-710, 1991.
  3. Song, C. K. and Shin, Y. J., "Effect of preload on running accuracy of high speed spindle," Transactions of the Korean Society of Machine Tool Engineers, Vol. 11, No. 2, pp. 65-70, 2002.
  4. Jiang, S. and Mao, H., "Investigation of variable optimum preload for a machine tool spindle," International Journal of Machine Tools & Manufacture, Vol. 50, No. 1, pp. 19-28, 2010. https://doi.org/10.1016/j.ijmachtools.2009.10.001
  5. Croft, D., Shedd, G., and Devasia, S., "Creep, Hysteresis and vibration compensation for piezoactuators: atomic force microscopy application," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 123, pp. 35-43, 2001. https://doi.org/10.1115/1.1341197
  6. Hwang, Y. K. and Lee, C. M., "A Review on the Preload Technology of the Rolling Bearing for the Spindle of Machine Tools," Int. J. Precis. Eng. Manuf., Vol. 11, No. 3, pp. 491-498, 2010. https://doi.org/10.1007/s12541-010-0058-4
  7. Hwang, Y. K. and Lee, C. M., "Development of automatic variable preload device for spindle bearing by using centrifugal force," International Journal of Machine Tools & Manufacture, Vol. 49, No. 10, pp. 781-787, 2009. https://doi.org/10.1016/j.ijmachtools.2009.04.002
  8. Hwang, Y. K. and Lee, C. M., "Development of a newly structured variable preload control device for a spindle rolling bearing by using an electromagnet," International Journal of Machine Tools & Manufacture, Vol. 50, No. 3, pp. 253-259, 2010. https://doi.org/10.1016/j.ijmachtools.2009.12.002
  9. Choi, C. H., Kim, D. H., and Lee, C. M., "A Fundamental Study on the Development of Variable Preload Device Using Rubber Force," J. Korean Soc. Precis. Eng., Vol. 28, No. 4, pp. 416-421, 2011.
  10. Choi, C. H. and Lee, C. M., "A Variable Preload Device using Liquid Pressure for Machine Tools Spindles," Int. J. Precis. Eng. Manuf., Vol. 13, No. 6, pp. 1009-1012, 2012. https://doi.org/10.1007/s12541-012-0131-2
  11. Brown, R. P., "Physical Testing of Rubber, 3rd ed.," Chapman & Hall, 1996.
  12. Youn, S. W. and Lee, S.-C., "Development of Shear Type Rubber Isolator," Proc. of KSPE Autumn Conference, pp. 782-787, 1997.
  13. Chang, T. Y. P., Saleeb, A. F., and Li, G., "Large strain analysis of rubber-like materials based on a perturbed lagrangian variational principle," Computational Mechanics, Vol. 8, pp. 221-233, 1991. https://doi.org/10.1007/BF00577376
  14. Chen, J. S., Pan, C., and Wu, C. T., "Large deformation analysis of rubber based on a reproducing kernel particle method principle," Computational Mechanics, Vol. 19, pp. 211-227, 1997. https://doi.org/10.1007/s004660050170

Cited by

  1. Rolling-element bearing modeling: A review vol.17, pp.12, 2016, https://doi.org/10.1007/s12541-016-0200-z
  2. The latest preload technology of machine tool spindles: A review vol.18, pp.11, 2017, https://doi.org/10.1007/s12541-017-0195-0