References
- D.Hanaoka, Y.Fukuzawa, C.Raminez, P.Miranzo, M.Belmonte, "Electrical discharge machining of ceramic/carbon nanostructure composites", Procedia CIRP, Vol. 6, pp. 95-100, 2013. https://doi.org/10.1016/j.procir.2013.03.033
-
Hyun-Seok TAK, Chang-Seung HA, Ho-Jun LEE, Hyung-Woo LEE, Young-Keun JEONG, Myung-Chagn Kang, "Characteristics of
$Al_2O_3$ /CNTs hybrid materials for micro-electrical discharge machining", Trans. Nonferrous Met. Soc. China, Vol. 21, pp. 28-32, 2011. https://doi.org/10.1016/S1003-6326(11)61055-8 - Kim, S. W., Fabrication and Mechnical properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes, A Thesis for a Doctorate, Pusan National University, Republic of Korea, 2010.
- Jingyue Wang, Zhiqiang Li, Genlian Fan, Huanhuan Pan, Zhixin Chen, "Reinforcement with graphene nanosheets in aluminum matrix composites", SCRIPTA MATER, Vol. 66 pp. 594-597, 2012. https://doi.org/10.1016/j.scriptamat.2012.01.012
-
Yuchi Fan, Shikuan Sun, Lidong Chen, Wang Jiang, "Preparation and electrical properties of graphene nanosheets/
$Al_2O_3$ composites", Carbon, Vol. 48, pp. 1743-1749, 2010. https://doi.org/10.1016/j.carbon.2010.01.017 - E. Ferraris, V. Castiglioni, F. Ceyssens, D. Reynaerts, "EDM drilling of ultra-high aspect ratio micro holes with insulated tools", CIRP Annals, Vol. 62, pp. 191-194, 2013. https://doi.org/10.1016/j.cirp.2013.03.115
-
E. Ferraris, D. Reynaerts, B. Lauwers, "Micro-EDM process investigation and comparison performance of
$Al_3O_2\;and\;ZrO_2$ based ceramic composites", CIRP Annals, Vol. 60, NO. 1, pp. 235-238, 2011. https://doi.org/10.1016/j.cirp.2011.03.131 -
K.M. Patel, Pulak M. Pandey, P. Venkateswara Rao, "Surface integrity and material removal mechanisms associated with the EDM of
$Al_2O_3$ ceramic composite", Int. J. Refract. Met. Hard Mat., Vol. 27, NO. 5, pp. 892-899, 2009. https://doi.org/10.1016/j.ijrmhm.2009.05.003 -
Abdus Sabur, Mohammad Yeakub Ali, Md. Abdul Maleque, Ahsan Ali Khan, "Investigation of Material Removal Characteristics in EDM of Nonconductive
$ZrO_2$ Ceramic", Procedia Engineering, Vol. 56, pp. 696-701, 2013. https://doi.org/10.1016/j.proeng.2013.03.180 - B. Lauwers, J.P. Kruth, W. Liu, W. Eeraerts, B. Schacht, P. Bleys, "Investigation of material removal mechanisms in EDM of composite ceramic materials", J. Mater. Process. Technol., Vol. 149, NO.1-3, pp. 347-352, 2004. https://doi.org/10.1016/j.jmatprotec.2004.02.013
- Kang, M. C., Lee, C. H., Kim, N. K., "Wire-tension Control System using Photo-interrupter Sensor and Micro-electrode Fabrication", J. of KSMPE, Vol. 12, No. 3, pp. 28-35, 2013.
- Y.S Wong, M Rahman, H.S Lim, H Han, N Ravi, "Investigation of micro-EDM material removal characteristics using single RC-pulse discharges", J. Mater. Process. Technol., Vol. 140, No. 1-3, pp. 303-307, 2003. https://doi.org/10.1016/S0924-0136(03)00771-4
Cited by
- 블록직선이송 방전연삭에 의한 미세전극 가공 및 그래핀 강화 알루미나 복합소재의 마이크로 홀 가공특성 vol.16, pp.1, 2013, https://doi.org/10.14775/ksmpe.2016.16.1.149