Journal of the Korea Organic Resources Recycling Association (유기물자원화)

Korea Organic Resources Recycling Association (유기성자원학회)
권호 표지
DOI QR코드

DOI QR Code

The Study of combustion characteristic and kinetic study of wastes and RDF

폐기물 및 RDF에 대한 연소특성 및 반응속도에 관한 연구

  • Published : 2013.03.30
⟨ Previous Next ⟩

Abstract

In this study, thermal weight loss, non-isothermally experiment, chemical composition analysis, calorific value, activation energy (E) were investigated to analysis the kinetic study of RDF, wood pellets, waste wood, waste textile and waste vinyl. When the chemical composition of solidification fuel was compared, the moisture content of RDF was less than the wood pellet and when the kinetic study was compared, the combustion reaction rate of the waste vinyl was higher than any other solidification fuels. However when the combustion efficiency was compared by the activation energy, the RDF had the higher efficiency than other wastes. RDF can be found that the reaction takes place between $320{\sim}720^{\circ}C$ depending on the heating rate.

본 연구에서는 RDF와 목재펠릿 그리고 폐목재, 폐섬유, 폐비닐 각각 폐기물로 반응속도를 분석하기 위해 열중량 감량 분석, 비등온 실험, 삼성분, 화학적 조성 분석, 발열량, 활성화 에너지(E) 기울기를 실험하고 값을 구하였다.고형연료의 각각의 삼성분을 비교하였을 때 RDF가 목재펠릿 보다 수분함량이 적게 나왔으며 발열량을 통해 각각의 폐기물 고형연료에서 연소반응 속도을 비교하여 보면 폐비닐의 연소반응이 제일 크게 나타났다. RDF와 목재펠릿을 비교해보면 회분의 차이는 목재펠릿이 좋다는 것을 알 수 있지만 활성화에너지로 비교하게 되면 RDF의 효율이 다른 4가지의 연료보다 좋다는 것을 알 수 있다. RDF는 승온 속도에 따라 차이가 있지만, $320{\sim}720^{\circ}C$ 사이에서 반응이 일어나는 것을 확인 할 수 있다.

Keywords

References

  1. 김민호 외, "부산시 사업장 가연성 폐기물의 물리화학적 특성분석 보고서" (2007).
  2. Choi, Y. S. and Kwon, Y. B., "The characteristics and prospects of refuse deriver fuel", J. korea solid wastes engineering society, 15(4), pp. 287-299. (1998).
  3. Choi, J. W., Park, Y. H. and Choi, S. M., "Solid waste fuel combustion in a fluidized bed-characteristics of a lab-scale combustor and experimental parameters" Korean Chem. Eng. Res., 39(5), pp. 629-634. (2001).
  4. Kim, D. W., Lee, J. M., Kim, J. S. and Seon, P. K., "Study on the combustion characteristics of Wood-pellet and korean anthracite using TGA", Korean Chem. Eng. Res., 48(1), pp. 58-67. (2009). https://doi.org/10.1021/ie800516s
  5. Kim, D. W., Lee, J. M. and Kim, J. S., "Study on the pyrolysis kinetics of RDF(refuse derived fuel) with thermogravimetric analysis", Korean Chem. Eng. Res., 47(6), pp. 676-682. (2009).
  6. Kim, H. Y., Pa가, S. S., Che, T. Y., Park, J. W. and Yang, W., "A Study on the characteristics of the pyrolysis for the PE, PP, PVC, RPF by using TGA", J. of KSPE pp. 637-641. (2007).
  7. Lee, S. W. and Choi, Y. S., "Pyrolysis characteristics of RDF prepared form MSWs", korean society of environmental engineers, pp. 197-199. (2002).
  8. Ohm, T. I., Ryu, C. K., Rho, N. S. and Kim, S. S., "Design of the moving grate-type RDF combustor using numerical simulation and experiment", korean society of environmental engineers, pp. 480-485. (2003).
  9. Shin, B. C., Lee, J. Y. and Choi, H. W., "Application and Prospection of RDF Technology", polymer science and technology, 13(3), pp. 307-314. (2002).
  10. Park, S. W. and Jang, C. H., "Original Paper : Assessment of Combustion Characteristics of Carbonized Sludge Using Non-isothermal Thermogravimetric Analysis", korea solid wastes engineering society, pp. 480-485. (2010).
  11. Tsuji, H., Hashimoto, N., Shirai, H. and Makino, H., "A study of combustion characteristics of dried sludge pellets by use of a plverized coal combustion test furnace", Journal of the Japan Institute of Energy, 88(5), pp. 422-429. (2009). https://doi.org/10.3775/jie.88.422
  12. Vyazovkin, S. and Wight, C. A., "Model free and model-fitting approaches of kinetic analysis of isothermal and nonisothermal data", Thermochimica Acta, 340-341, pp. 53-68. (1999). https://doi.org/10.1016/S0040-6031(99)00253-1