International Journal of Fluid Machinery and Systems

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

Influence of Blade Number on the Flow Characteristics in the Vertical Axis Propeller Hydro Turbine

  • Byeon, Sun-Seok (Graduate School of Mechanical Engineering, Sungkyunkwan University) ;
  • Kim, Youn-Jea (School of Mechanical Engineering, Sungkyunkwan University)
  • 투고 : 2012.09.11
  • 심사 : 2013.02.28
  • 발행 : 2013.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the design method of a low-head propeller-type hydro turbine is studied for various numbers of blades on an axial propeller. We also investigate the relationship between geometrical parameters and internal performance parameters, such as angular velocities (100, 200, 300, 400 rpm) and 2.5~4m low heads through a three-dimensional numerical method with the SST turbulent model. The numerical results showed that the blade number had a more dominant influence than the change in heads and rotational speed on the flow characteristics of the turbine. The distributions of pressure and velocity in the streamwise direction of the propeller turbine were graphically depicted. Especially, the relationship among dimensionless parameters like specific speed ($N_s$), flow coefficient (${\phi}$) and power coefficient (P) were investigated.

키워드

참고문헌

  1. S.-S. Byeon and Y.-J. Kim, 2012, "Numerical study on the flow characteristics of the axial propeller hydro turbine," The Eighth Thermal and Fluids Engineering Conference, GSF26-018.
  2. Singh, P. and Nestmann, F., 2011, "Experimental investigation of the influence of blade height and blade number on the performance of low head axial flow turbines," J. of Renewable Energy, Vol. 36, pp. 272-281. https://doi.org/10.1016/j.renene.2010.06.033
  3. Singh, P. and Nestmann, F., 2009, "Experimental optimization of a free vortex propeller runner for micro hydro application," J. of Renewable Energy, Vol. 33, pp. 991-1002.
  4. Singh, P. and Nestmann, F., 2010, "Exit blade geometry and part-load performance of small axial flow propeller turbine: An experimental investigation," J. of Renewable Energy, Vol. 34, pp. 798-811.
  5. Yousef Yassi and Safar Hashemloo, 2010, "Improvement of the efficiency of the Agnew micro hydro turbine at part loads due to installing guide vanes mechanism," Energy Conversion and Management, Vol. 51, pp. 1970-1975. https://doi.org/10.1016/j.enconman.2010.02.029
  6. L.M. C. Ferro, L. M. C. Gato, A.F. O. Falcao, 2011, "Design of the rotor blades of a mini hydraulic bulb-turbine," Renewable Energy, Vol. 36, pp. 2395-2403. https://doi.org/10.1016/j.renene.2011.01.037
  7. Alexander, K.V. Giddens, E. P., Fuller, A.M., 2009, "Axial-flow turbines for low head micro hydro systems," J. of Renewable Energy, Vol. 34, pp. 35-47. https://doi.org/10.1016/j.renene.2008.03.017
  8. Dixon, S. L., 2005, "Fluid Mechanics, Thermodynamics of Turbomachinery," Elsevier, Oxford, UK, Chapters 2, 6 and 9.
  9. Gorla, R. S. R. and Khan, A. A., 2003, "Turbomachinery Design and Theory," Marcel Dekker, New York, Chapters 1 and 3.
  10. Wilcox, D. C., 1986, "Multiscale model for turbulent flows," AIAA 24th Aerospace Sciences Meeting, American Institute of Aeronautics and Astronautics, pp. 1598-1605.
  11. Menter, F. R., 1994, "Two-equation eddy-viscosity turbulence models for engineering applications," AIAA-Journal, Vol. 32(8), pp. 1598-1605. https://doi.org/10.2514/3.12149
  12. ANSYS CFX ver.13 User's Guide, 2011, ANSYS Inc.

피인용 문헌

  1. Design basics of a small hydro turbine plant for capacity building in sub-Saharan Africa vol.8, pp.1, 2016, https://doi.org/10.1080/20421338.2015.1128039