초록
해양지질 조사 또는 엔지니어링 목적의 해양 탄성파 탐사에서 해상의 너울로 인하여 탐사자료의 품질이 저하된다. 1 ~ 2 m의 너울은 탐사 중에 종종 발생하는데, 1 m 이내의 정밀도를 요하는 고해상 해저탐사자료에서 이를 보정하여 줌으로써 탄성파 단면도의 수평적 연속성을 높일 수 있다. 이 연구에서는 8채널 고해상 에어건 탐사자료와 3.5 kHz 천부지층탐사자료에 대하여 너울영향 보정을 적용하였다. 너울영향을 효율적으로 보정하기 위해서는 탐사자료에 나타나는 해저면의 위치를 정확하게 산출하는 것이 중요하다. 이 연구에서는 해저면 수심값 추출을 위하여 해저면 부근의 최대 진폭을 이용하거나 최대진폭값의 일정 기준을 넘어서는 지점을 해저면 위치로 추출하는 방법 등을 사용하였다. 품질이 낮은 자료에 대해서는 수심값 추출이 용이하도록 엔벨로프 또는 해저면 요소파(wavelet) 신호와 상호상관을 수행한 자료를 사용하였다. 이와 같은 방법으로 산출한 수심값으로부터 평균값을 구한 후, 그 차이를 보정하여 주었다. 시험 적용된 에어건 탐사자료에서는 약 0.8 m, 2종의 3.5 kHz 천부지층탐사자료에서는 각각 약 0.5 m와 약 2.0 m 범위의 너울영향을 보정하였다. 자료의 상태에 따라 적절한 해저면 수심값 추출 방법을 사용하여 탐사자료의 너울 영향을 보정함으로써 지층의 연속성이 향상된 고품질의 고해상 해저 탄성파 단면도를 제작할 수 있었다.
The seismic data quality of marine geological and engineering survey deteriorates because of the sea swell. We often conduct a marine survey when the swell height is about 1 ~ 2 m. The swell effect correction is required to enhance the horizontal continuity of seismic data and satisfy the resolution less than 1 m. We applied the swell correction to the 8 channel high-resolution airgun seismic data and 3.5 kHz subbottom profiler (SBP) data. The correct sea bottom detection is important for the swell correction. To detect the sea bottom, we used maximum amplitude of seismic signal around the expected sea bottom, and picked the first increasing point larger than threshold value related with the maximum amplitude. To find sea bottom easily in the case of the low quality data, we transformed the input data to envelope data or the cross-correlated data using the sea bottom wavelet. We averaged the picked sea bottom depths and calculated the correction values. The maximum correction of the airgun data was about 0.8 m and the maximum correction of two kinds of 3.5 kHz SBP data was 0.5 m and 2.0 m respectively. We enhanced the continuity of the subsurface layer and produced the high quality seismic section using the proper methods of swell correction.