DOI QR코드

DOI QR Code

강섬유보강콘크리트 보의 비틀림 성능에 관한 실험적 연구

Experimental Study on Torsional Performance of Steel Fiber-Reinforced Concrete Beams

  • 주현진 (서울시립대학교 건축공학과) ;
  • 이득행 (서울시립대학교 건축공학과) ;
  • 황진하 (서울시립대학교 건축공학과) ;
  • 김강수 (서울시립대학교 건축학부) ;
  • 오영훈 (건양대학교 건축학과)
  • 발행 : 2013.06.25

초록

It is known that steel fiber-reinforced concrete (SFRC) members have enhanced torsional performances, compared to typical reinforced concrete members, but, our understanding on torsional behavior of SFRC members are yet very limited due to insufficient research on this topic. Thus, this study performed torsional tests on SFRC members, in which radial strain gradients developed in thin-walled concrete tube were measured in detail. The shortcomings of current design codes on the torsional strength of heavily reinforced members in transverse direction have been also discussed. Test results showed that the SFRC specimens having larger volume fraction of steel fibers had greater torsional strength and more ductile behavior as well. The compressive strains in the extreme fiber of SFRC members were estimated at about 0.0035 to 0.0040 at ultimate state. All specimens had the initial cracking angle of about 45 degrees, while the inclined angles at ultimate became somewhat smaller. The current code provisions overestimated the torsional strengths of all specimens that were over-reinforced against torsion.

키워드

참고문헌

  1. Neville, A., Neville on Concrete : An Examination of Issues in Concrete Practice, 2nd ed., BookSurge LLC, 2006, 10-33 pp.
  2. Ahmad, S. H., Khaloo, A. R., and Poveda, A., "Shear Capacity of Reinforced High-Strength Concrete Beams", ACI Structural Journal, Vol. 83, No. 2, 1986, pp. 297-305.
  3. Bukhari, I. A., and Ahmad, S., "Evaluation of Shear Strength of High-Strength Concrete Beams without Stirrups", The Arabian Journal for Science and Engineering, Vol. 33, No. 2B, 2008, pp. 321-336.
  4. John, J. R., and Henry, G. R., "Shear Strength of High-Strength Concrete Beams with Web Reinforcement", ACI Structural Journal, Vol. 87, No. 2, 1990, pp. 191-198.
  5. Pendyala, R. S., and Mendis, P., "Experimental Study on Shear Strength of High-Strength Concrete Beams", ACI Structural Journal, Vol. 97, No. 4, 2000, pp. 564-571.
  6. 윤현도, 김선우, 전에스더, "섬유 혼입조건에 따른 섬유 보강고인성 시멘트 복합체의 인장거동 특성", 대한건축학회논문집, 22권, 12호, pp. 79-86, 2006
  7. 오영훈, 김정해, "전단보강이 없는 강섬유보강 콘크리트 휨부재의 휨 및 전단강도의 평가", 한국콘크리트학회 논문집, 20권, 2호, pp. 257-267, 2008
  8. ACI Committee 544, "Design Consideration for Steel Fiber Reinforced Concrete (ACI 544.4R-88)", ACI Structural Journal, V.85, No.5, 1988, pp.563-580.
  9. Adebar, P., Mindess, S., St.-Pierre, D., and Olund, B., "Shear Tests of Fiber Concrete Beams without Stirrups", ACI Structural Journal, V. 94, No. 1, 1997, pp.68-76.
  10. Ashour, S. A., Hasanain, G. S., and Wafa, F. F., "Shear Behavior of High-Strength Fiber-Reinforced Concrete Beams", ACI Structural Journal, Vol. 89, No. 2, 1992, pp. 176-184.
  11. Batson, G., Jenkins, E., and Spatney, R., "Steel Fibers as Shear Reinforcement in Beams", ACI Journal, Proceedings V.69, No.10, 1972, pp.640-644.
  12. Swamy, R. N., Mangat, P. S., and Rao, C. V., "Mechanics of Fiber Reinforcement of Cement Matrices", ACI Special Publication, SP-44, Fiber Reinforced Concrete, 1974, pp. 1-28.
  13. Rao, T. D. G, Seshu, D. R., "Analytical Model for the Torsional Response of Steel Fiber Reinforced Concrete Members under Pure Torsion", Cement & Concrete Composites, V. 27, No. 4, 2005, pp. 493-501. https://doi.org/10.1016/j.cemconcomp.2004.03.006
  14. Hsu, T. T. C., Torsion of Reinforced Concrete, Van Nostr and Reinhold, Inc., New York, 1984, 516 pp.
  15. Hsu, T. T. C,. "Softened Truss Model Theory for Shear and Torsion", ACI Structural Journal, Vol. 85, No. 6, 1988, pp. 624-635.
  16. Rahal K. N., and Collins, M. P., "Analysis of Sections Subjected to Combined Shear and Torsion-A Theoretical Model", ACI Structural Journal, Vol. 92, No. 4, 1995, pp. 459-469.
  17. ACI Committee 318, Building Code Requirements for Reinforced Concrete and Commentary(ACI 318R-08), American Concrete Institute, Detroit, 2008, 465 pp.
  18. Craig, R. J., Dunya, S., Riaz, J., and Shirazi, H., "Torsional Behavior of Reinforced Fibrous Concrete Beams", Fiber Reinforced Concrete-International Symposium, SP-81, American Concrete Institute, Detroit, 1984, pp. 17-49.
  19. Choi, K. K., Park, H. G., Wight, J. K., "Shear Strength of Steel Fiber-Reinforced Concrete Beams without Web Reinforcement", ACI Structural Journal, Vol. 104, No. 1, 2007, pp. 12-21.
  20. Fanella, D.A., and Naaman, A.E., "Stress-strain properties of fiber reinforced mortar in compression", ACI Journal, Vol. 82, No. 4, 1985, pp. 475-483.
  21. Nataraja, M.C., Dhang, N., and Gupta, A.P., "Stress-straincurves for steel-fiber reinforced concrete under compression", Cement & Concrete Composites, Vol. 21, 1999, 383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
  22. Ju, H., Lee, D. H., Hwang, J. H., Kang, J. W., Kim, K. S., and Oh, Y. H., "Torsional Behavior Model of Steel Fiber-Reinforced Concrete Members Modifying Fixed-Angle Softened-Truss Model", Composites Part B: Engineering, Vol. 45, No. 1, 2013, pp. 215-231. https://doi.org/10.1016/j.compositesb.2012.09.021
  23. Hsu, T. T. C., "Torsion of Structural Concrete-Plain Concrete Rectangular Sections", Torsion of Structural Concrete, SP-18, Americal Concrete Institute, Detroit, 1968, pp. 203-238.
  24. Narayanan R., and Kareem-Palanjian, A. S., "Torsion in Beams Reinforced with Bars and Fibers", Journal of Structural Engineeing, ASCE, Vol. 112, No. 1, 1986, pp. 53-66. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:1(53)
  25. Mansur, M. A., Nagataki, S., Lee, S. H., and Oosumimoto, Y., "Torsional Response of Reinforced Fibrous Concrete Beams", ACI Structural Journal, Vol. 86, No. 1, 1989, pp. 36-44.
  26. Rahal, K. N., Collins, M. P., "Effect of thickness of concrete cover on shear-torsioninteraction - an experimental investigation", ACI Structural Journal, Vol. 92, No. 3, 1995, pp. 334-42.
  27. You, Y. M., Belarbi, A. "Thickness of shear flow zone in a circular RC column under pure torsion", Engineering Structures, Vol. 33, No. 9, 2011, pp. 2435-47. https://doi.org/10.1016/j.engstruct.2011.04.016
  28. 한국콘크리트학회, "콘크리트구조기준", 2012, 342 pp.
  29. Lee, J. Y. and Kim, S. W., "Torsional Strength of RC Beams Considering Tension Stiffening Effect", Journal of Structural Engineering, ASCE, Vol. 136, No. 11, 2010, pp. 1367-1378. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000237
  30. Eurocode 2, Design of Concrete Structures, Eurocode 2, 1992, 227 pp.
  31. JSCE, Standard Specifications for Concrete Structures-2002, Japan Society of Civil Engineering, 2002, 257 pp.