DOI QR코드

DOI QR Code

Shear Strength Evaluation of Steel Fiber-Reinforced Concrete Flexural Members Using ANFIS

ANFIS를 이용한 강섬유로 보강된 콘크리트 휨부재의 전단강도 평가

  • Published : 2013.06.25

Abstract

Steel fiber-reinforced concrete(SFRC) members has improved shear strength compared to typical reinforced concrete members as the steel fibers mixed into concrete improve the tensile performance of concrete. Due to the very complicated shear transfer mechanisms of SFRC members, however, researchers has mostly proposed semi-empirical equations for estimation of shear strength of SFRC members based on test results. In this study, Adaptive Nuero-Fuzzy Inference System(ANFIS) was adopted to evaluate shear strengths of SFRC flexural members. It is known that the ANFIS, which is a knowledge-based model, can provide very accurate analysis results when the reliable and sufficient data are utilized. A total of 172 test data were collected from literature, and used for development of ANFIS shear strength model for SFRC beams, which provided very accurate evaluation of the shear strength of SFRC members.

Keywords

References

  1. Batson, G., Jenkin, E., and Spatney, R. "Steel Fiber as Shear Reinforcement in Beams," ACI Journal, proceedings, Vol. 55, No. 9, 1972, 99. 640-644
  2. Sharma, A. K., ''Shear Strength of Steel Fiber Reinforced Concrete Beams,'' ACI Journal, V.83, No.4, 1986, pp.624-628.
  3. Narayanan, R., and Darwish, I. Y. S., "Use of Steel Fibers as Shear Reinforcement." ACI Structural Journal, Vol. 84, No. 3, pp. 216-227
  4. Mansur, M., A., Ong, K. C. G., and Paramasivam, P., "Shear Strength of Fibrous concrete beams without stirrups," Journal of Structural Engineering, ASCE, Vol. 126, No. 9, 1986, pp. 2066-2079
  5. Lim, T. Y., Paramasivam, P., and Lee, S. L.. "Shear and Moment Capacity of Reinforced Steel Fibre Concrete Beams." Magazine of Concrete Research, Vol. 39, No. 140, 1987, pp. 148-160. https://doi.org/10.1680/macr.1987.39.140.148
  6. Ashour, S. A., Hassanain, G. S., and Wafa, F. F., "Shear Behavior of High-Strength Fiber Reinforced Concrete Beams," ACI Structural Journal , Vol. 89, No. 2, 1992, pp. 176-184.
  7. Li, V. C.,Ward, R., and Hmaza, A. M., "Steel and Synthetic Fibers as Shear Reinforcement." ACI Material Journal, Vol. 89, No. 5, 1992, pp. 499-508.
  8. Swamy, R. N., and Bahia, H. M., "The Effectiveness of Steel Fibers as Shear Reinforcement." Concrete International, Vol. 7, No. 3, 1985, 35-40.
  9. Karl, K. W., Kim, K. S., Lee, D. H., Hwang, J. H. and Oh, Y. H., "Experimental Study on Shear Strength of Steel Fiber Reinforced Concrete Beams," Journal of the Korea Institute for Structural Maintenance Inspection, Vol.14, No.3, 2010, pp.160-170.
  10. Junior, S. F., and Hanai, J. B., "Shear Behaviour of Fiber Reinforced Beams," Cement and Concrete Composites, Vol. 19, No. 4, 1997, pp. 359-366. https://doi.org/10.1016/S0958-9465(97)00031-0
  11. Lim, D. H., and Oh, B. H., "Experimental and theoretical investigation on the shear of steel fibre reinforced concrete beams," Engineering structures, Vol. 21, No.10, 1999, 937-944. https://doi.org/10.1016/S0141-0296(98)00049-2
  12. Cucchiara, C., La Mendola, L., and Papia, M., "Effectiveness of Stirrups and Steel Fibres as Shear Reinforcement." Cement and Concrete Composites, Vol. 26, No. 7, 2004, pp. 777-786. https://doi.org/10.1016/j.cemconcomp.2003.07.001
  13. Dinh, H. H., Parra-Montesinos, G. J., Wight, J. K., "Shear Strength Model for Steel Fiber Reinforced Concrete Beams without Stirrup Reinforcement," Journal of Structural Engineering, ASCE, 2011, pp. 1039-1051
  14. Tan, K. H., Murugappan, K., and Paramasivam, P., "Shear Behavior of Steel Fiber Reinforced Concrete Beams." ACI Structural Journal, 90(1), 1993, pp. 3-11.
  15. Casanova, P., and Rossi, P. (1999). "High-strength concrete beams submitted to shear: Steel fibers versus stirrups." Structural applications of fiber reinforced concrete (SP-182), American Concrete Institute, Farmington Hills, MI, 53-68.
  16. Noghabai, K., "Beams of Fibrous Concrete in Shear and Bending : Experiment and Model," Journal of Structural Engineering, ASCE, Vol. 126, No. 2, 2000, pp. 243.251. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:2(243)
  17. Kwak, Y.-K., Eberhard, M. O., Kim, W.-S., and Kim, J., "Shear Strength of Steel Fiber-Reinforced Concrete Beams without Stirrups." ACI Structural Journal , Vol. 99, No. 4, 2002, pp. 530-538.
  18. Rosenbusch, J., and Teutsch, M., "Trial Beams in Shear," Brite/Euram Project 97-4163, Final Rep., Sub Task 4.2, Technical Univ. of Braunschweig, Braunschweig, Germany, 2002
  19. Ang, A. H., and Tang, W. H., Probability Concepts in Engineering, WILEY, 2007, 406pp.
  20. Ang, A. H., and Tang, W. H., Probability Concepts in Engineering Planning and Design Volume 2 : Decision, Risk, and Reliability, WILEY, 1990, 562pp.
  21. Glynn, P. W., and Igelehart, D. L., "Importance Sampling for Stochastic Simulations," Institute for Operations Research and the Management Sciences, Vol. 35, No. 11, 1989, pp. 1367-1392.
  22. Choi, K. K., Mahmoud, M. R. T., and Alaa G. S., "Simplified Punching Shear Design Method for Slab-Column Connections Using Fuzzy Learning.," ACI Structural Journal , Vol. 104, No. 4, 2007, pp. 438-447.
  23. Jung, S. M., Kim, K. S., "Knowledge-based Prediction of Shear Strength of Concrete Beams without Shear Reinforcement," Engineering Structures, 30, 2008, pp. 1515-1525. https://doi.org/10.1016/j.engstruct.2007.10.008
  24. Song, J. H., Knag, W. H., Kim, K. S., and Jung, S. M., "Probabilistic Shear Strength Model for Reinforced Concrete Beams without Shear Reinforcement," Structural Engineering and Mechanics, Vol. 34, No. 1, 2010, pp. 15-38. https://doi.org/10.12989/sem.2010.34.1.015
  25. Kim, Y. M., Kim, C. K., and Hong, S. G., "Fuzzy Based State Assessment for Reinforced Concrete Building Structures," Engineering Structures, 28, 2006, pp. 1286-1297. https://doi.org/10.1016/j.engstruct.2005.12.011
  26. Osman, U., Fuat, D., Tayfun, U., "Fuzzy Logic Approach to Predict Stress-Strain Curves of Steel Fiber-Reinforced Concretes in Compression," Building and Environment, Vol 42, 2007, pp. 3589-3595. https://doi.org/10.1016/j.buildenv.2006.10.023
  27. Lee, D. H., Hwang, J. H., Ju, H., Kim, K. S., and Kuchma, D. A., "Nonlinear Finite Element Analysis of Steel Fiber Reinforced Concrete Members Using Direct Tension Force Transfer Model," Finite Elements in Analysis and Design, Vol. 50, 2012, pp. 266-286. https://doi.org/10.1016/j.finel.2011.10.004
  28. Kim, K. S., Lee, D. H., Hwang, J. H., and Kuchma, D. A., "Shear Behavior Model for Steel Fiber-Reinforced Concrete Members without Transverse Reinforcements," Composites Part B: Engineering, Vol. 43, No. 5, 2012, pp. 2324-2334. https://doi.org/10.1016/j.compositesb.2011.11.064
  29. Hwang, J. H., Lee, D. H., Kim, K. S., Yun, H. D., Seo, S. Y., and Cho, C. G., "Ductility and Bond Characteristics of Steel Fiber-Reinforced Concrete Members Subjected to Shear," Advanced Science Letters, Vol. 13, No. 1, 2012, pp. 491-494. https://doi.org/10.1166/asl.2012.3782
  30. Karl, K. W., Lee, D. H,, Hwang, J. H., Kim, K. S., and Choi, I. S., "Revision on Material Strenth of Steel Fiber-Reinforced Concrete," International Journal of Concrete Structures and Materials, Vol. 5, No. 2, pp. 87-96.
  31. 갈경완, 김강수, 이득행, 황진하, 주현진, 서수연, "강섬유로 보강된 고강도 콘크리트 보의 전단강도에 관한 실험적 연구", 대한건축학회논문집, 제26권 제10호, 2010, pp. 19-28.
  32. Jang, J. S. R., Sun, C. T., and Mizutani, E., Neuro-Fuzzy and Soft Computing, Prentice Hall, 1997, 614 pp.
  33. Grabisch, M., Murofushi, T., and Sugeno, M., Fuzzy Measures and Integral, Physica-Verlag, 2007, 476 pp.
  34. MacQueen, J. B., "Some Methods for Classification and Analysis of Multivariate Observations," Proceedings of 5th Berkeley Symposium on Mathematical Statistics and Probability, University of California press, 2009, pp. 281-297