DOI QR코드

DOI QR Code

An Experimental Study on the Limiting Width-to-Thickness Ratio of the High Strength Round CFT

고강도 원형 CFT의 판폭두께비 제한에 관한 실험적 연구

  • Published : 2013.02.28

Abstract

CFT columns have many advantages such as increasing the compressive strength and ultimate strain of concrete, and aslo increasing the buckling load of steel tube. The purpose of this paper is evaluation of present design code formulas for high strength steel composite members and validity of width-to-thickness ratio limit especially in 800 MPa grade steel. Total 8 short column specimens which were made by high strength steel were tested. Main test variables were width-to-thickness ratio and concrete compressive strength. Test results were analyzed in the viewpoint of axial load capacity, load-shortening relationship, and failure mode. Test results indicated that axial load capacity in all specimens exceeded over 20% compared with the calculated value by KBC2009, and over 30% by the AISC 360-10 regardless of the width-to-thickness. And local buckling was not observed before the strain was reached the yield strain of steel in compact, non-compact and slender width-to-thickness ratio specimens by AISC 360-10 regulations. From these test results, we can concluded that the limit of width-to-thickness ratio in present design code can be modified in high strength steel composite members.

Keywords

References

  1. 이성욱, 엄철환, 김동규, 콘크리트 충진 각형강관의 국부좌굴 보강효과 및 폭두께비 제한에 관한 실험적 연구, 대한건축학회 학술발표논문집, 제6권 1호, 1986.4, pp. 389-392
  2. 정헌모 외 4인, 이중강관 CFT 단주의 구조성능 평가, 대한건축학회 학술발표논문집 구조계, 제29권 1호, 2009.10, pp. 405-408
  3. 이승조, 박정민, 김화중, 중심압축을 받는 고강도콘크리트 충전 각형강관 기둥의 내력특성, 대한건축학회논문집 구조계, 제18권 7호, 2002.7., pp. 11-18
  4. 박정민, 김화중, 콘크리트 충전 강관 단주의 축압축 거동 특성에 관한 실험적 연구, 대한건축학회논문집, 제11권 6호, 1995. 6., pp. 125-135
  5. 문태섭 외 4인, 충전 콘크리트 원형강관주의 좌굴내력에 관한 실험적 연구, 대한건축학회 학술발표논문집, 제13권 2호, 1993. 10, pp. 543-548
  6. Brian Uy, Strength of concrete filled steel box columns incorporating local buckling, Journal of Structural Engineering, March. 2003, pp. 341-352
  7. B. Uy, M. A. Bradford, Elastic local buckling of steel plates in composite steel-concrete members, Engineering Structures, Vol.18, No.3, 1996, pp. 193-200 https://doi.org/10.1016/0141-0296(95)00143-3
  8. 국토해양부, 건축구조기준(KBC-S) , 2009, pp. 460-474
  9. AISC, Specification for structural steel buildings, 2010, pp. 81-104