참고문헌
- D. Pletcher and F. C. Walsh, Industrial Electrochemistry, second edition, 211, Chapman and Hall, New York (1990).
- H. H. Uhlig and H. Bohni, Environmental Factors Affecting the Critical Pitting Potential of Aluminum, J. Electrochem. Soc., 116, 906 (1969). https://doi.org/10.1149/1.2412167
- K. Arai, T. Suzuki, and T. Atsumi, Effect of Trace Elements on Etching of Aluminum Electrolytic Capacitor Foil, J. Electrochem. Soc., 132, 1667 (1985). https://doi.org/10.1149/1.2114188
- J. Kang, Y. Shin, and Y. Tak, Growth of etch pits formed during sonoelectrochemical etching of aluminum, Electrochim. Acta., 51, 1012 (2005). https://doi.org/10.1016/j.electacta.2005.04.070
- K. R. Hebert and R. C. Alkire, Growth and Passivation of Aluminum Etch Tunnels, J. Electrochem. Soc., 135, 2147 (1988).
- M. Baumgartner and H. Kaesche, ALUMINUM PITI'ING IN CHLORIDE SOLUTIONS: MORPHOLOGY AND PIT GROWTH KINETICS, Corros. Sci., 31, 231 (1990). https://doi.org/10.1016/0010-938X(90)90112-I
- K. Hebert and R. Alkire, Growth Rates of Aluminum Etch Tunnel, J. Electrochem. Soc., 135, 2447 (1988). https://doi.org/10.1149/1.2095356
- D. Goad, Tunnel Morphology in Anodic Etching of Aluminum, J. Electrochem. Soc., 144, 1965 (1997). https://doi.org/10.1149/1.1837730
- S. Park, C. Lee, H. Cho, T. Kim, and S. Suh, Formation of uniform square-shaped tunnel pit by electrochemical etching with an opened polyimide layer on aluminum foil, Surf. Interface Anal., 44, 1423 (2012). https://doi.org/10.1002/sia.4961
- T. Fukushima, K. Nishio, and H. Masuda, Optimization of Etching Conditions for Site-Controlled Tunnel Pits with High Aspect Ratios in Al Foil, J. Electrochem. Soc., 157, C137 (2010). https://doi.org/10.1149/1.3308594
- J. Jang, W. Choi, N. Kim, C. Lee, T. Kim, C. Park, and S. Suh, Formation of aluminum tunnel pits arrayed using SU-8 masks with UV-assisted thermal imprint lithography, Microelectron. Eng., 87, 2610 (2010). https://doi.org/10.1016/j.mee.2010.07.025
- G. Park, K. Kim, H. Lee, C. Park, Y. Kim, Y. Tak, and J. Choi, Controllable Patterning of an Al Surface by a PDMS Stamp, Appl. Chem. Eng., 23, 501 (2012).
- K. Nishio, T. Fukushima, and H. Masuda, Control of Pitting Sites on Al for Electrolytic Capacitors Using Patterned Masking Film, Electrochem. Solid-State Lett., 9, B39 (2006). https://doi.org/10.1149/1.2214364
- K. Nishio, T. Fukushima, A. Takeda, and H. Masuda, Fabrication of Site-Controlled Tunnel Pits with High Aspect Ratios by Electrochemical Etching of Al Using Masking Film, Electrochem. Solid-State Lett., 10, C60 (2007). https://doi.org/10.1149/1.2767531
- Y. Tak, E. R. Henderson, and K. R. Hebert, Evolution of Microscopic Surface Topography during Passivation of Aluminum, J. Electrochem. Soc., 141, 1446 (1994). https://doi.org/10.1149/1.2054944