Journal of international Conference on Electrical Machines and Systems

Journal of International Conference on Electrical Machines and Systems (대한전기학회 분과)
권호 표지
DOI QR코드

DOI QR Code

Output Characteristics of Linear Switched Reluctance Motor with YBCO Tape Conductors

  • Hirayama, Tadashi (Graduate School of Science and Engineering, Kagoshima University) ;
  • Asakawa, Shinichiro (Graduate School of Science and Engineering, Kagoshima University) ;
  • Kawabata, Shuma (Graduate School of Science and Engineering, Kagoshima University)
  • Received : 2013.10.12
  • Accepted : 2013.10.31
  • Published : 2013.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents output characteristics of a linear switched reluctance motor (LSRM) with excitation windings wound by using high-temperature superconducting (HTS) tapes. In a double-sided LSRM, Bi-2223 or YBCO tape conductors are used for the excitation windings. The characteristics of the LSRM are obtained by a finite element method analysis. We can obtain large thrust compared with a conventional LSRM by using YBCO tape conductors. Also, the effect of a configuration of the YBCO coil on the thrust is calculated. We discuss a suitable coil configuration for the average thrust upgrading.

Keywords

References

  1. J. Park, S. Jang, J. Choi, S. Sung, and I. Kim, "Dynamic and Experimental Performance of Linear-Switched Reluctance Machine with Inductance Variation According to Airgap Length," IEEE Trans. on Magnetics, vol. 46, pp.2334-2337, June 2010. https://doi.org/10.1109/TMAG.2010.2043927
  2. G. Baoming, A. Almeida, and F. Ferreira, "Design of Transverse Flux Linear Switched Reluctance Motor," IEEE Trans. on Magnetics, vol. 45, pp.113-119, January 2009. https://doi.org/10.1109/TMAG.2008.2006193
  3. N. Vattikuti, R. Vandana, and B. G. Fernandes, "A novel high force density linear segmented switched reluctance machine," IECON 2008, pp.1083-1088, November 2008.
  4. L. Kolomeitsev, D. Kraynov, S. Pakhomin, F. Rednov, E. Kallenbach, V. Kireev, T. Schneider, and J. Bocker, "Linear Switched Reluctance Motor as a High Efficiency Propulsion System for Railway Vehicles," SPEEDAM 2008, pp.155-160, 2008.
  5. Hirayama T., Uwada K., Kawabata S., "Characteristics Analysis and Verification of a Double-sided HTS Linear Switched Reluctance Motor," Proceedings of the Twenty-Fourth International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2012, pp. 743-746, May 2013.
  6. T. Hirayama, K. Uwada, S. Kawabata, "Static Characteristics of a Double-sided Linear Switched Reluctance Motor with High-temperature Superconducting Excitation Winding," Proceedings of The 15th International Conference on Electrical Machines and Systems, No. DS3G5-9, pp. 1-4 (CD-ROM), October 2012.
  7. M. Ogata, K. Mizuno, "Status of High-temperature Superconducting Wires in the World," Railway Technical Research Institute (RTRI REPORT), Vol.25, No. 3, pp. 53-56, March 2011. (in Japanese)

Cited by

  1. Experimental Manufacture and Performance Evaluation of Linear Switched Reluctance Motor with HTS Excitation Windings vol.81, 2016, https://doi.org/10.1016/j.phpro.2016.04.044
  2. Study on Thrust Improvement and Ripple Suppression of HTS Linear Switched Reluctance Motor with Coreless HTS Excitation Windings vol.81, 2016, https://doi.org/10.1016/j.phpro.2016.04.045