DOI QR코드

DOI QR Code

단순화된 타이어 진동전달 모델의 전달경로분석법을 이용한 로드노이즈 예측기술 개발

Road Noise Estimation Based on Transfer Path Analysis Using a Simplified Tire Vibration Transfer Model

  • Shin, Taejin (Department of Mechanical Engineering, Inha University) ;
  • Park, Jongho (Department of Mechanical Engineering, Inha University) ;
  • Lee, Sangkwon (Department of Mechanical Engineering, Inha University) ;
  • Shin, Gwangsoo (Department of Mechanical Engineering, Inha University) ;
  • Hwang, Sungwook (Department of Mechanical Engineering, Inha University)
  • 투고 : 2012.10.31
  • 심사 : 2013.01.24
  • 발행 : 2013.02.20

초록

Quantification of road noise is a challenging issue in the development of tire noise since its transfer paths are complicated. In this paper, a simplified model to estimate the road noise is developed. Transfer path of the model is from wheel to interior. The method uses the wheel excitation force estimated throughout inverse method. In inversion procedure, the Tikhonov regularization method is used to reduce the inversion error. To estimate the wheel excitation force, the vibration of knuckle is measured and transfer function between knuckle and wheel center is also measured. The wheel excitation force is estimated by using the measured knuckle vibration and the inversed transfer function. Finally interior noise due to wheel force is estimated by multiplying wheel excitation force in the vibro-acoustic transfer function. This vibro-acoustic transfer function is obtained throughout measurement. The proposed method is validated by using cleat excitation method. Finally, it is applied to the estimation of interior noise of the vehicle with different types of tires during driving test.

키워드

참고문헌

  1. Sandberg, U. and Ejsmont, J. A., 2002, Tyre/road Noise Reference Book, Informex, pp. 43-154.
  2. Kim, S. J. and Lee, S. K., 2007, The Analysis of Vehicle Interior Noise by the Powertrain and Measurement of Noise Transfer Function using Vibro-acoustic Reciprocity, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 4, pp. 501-506.
  3. van Keulen, Ir. W. and Duskov, Dr. ir. M., 2005, Inventory Study on Basic Knowledge on Tyre/road Noise, IPG Project Report DWW-2005-022.,
  4. Harrison, M., 2004, SAE International, Vehicle Refinement: Controlling Noise and Vibration in Road Vehicle, pp. 179-181.
  5. Park, J. H., Hwang, S. W. and Lee, S. K., 2012, Road Noise Prediction Based on Frequency Response Function of Tire Utilizing Cleat Excitation Method, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 8, pp. 720-728. https://doi.org/10.5050/KSNVE.2012.22.8.720
  6. Choi, H. G., Thite, A. N. and Thompson, D. J., 2007, Comparison of Methods for Parameter Selection in Tikhonov Regularization with Application to Inverse Force Determination, Journal of Sound and Vibration, Vol. 304, No. 3/5, pp. 561-917.
  7. Tikhonov, A. N., 1963, Solution of Incorrectly Formulated Problems and the Regularizaion Method, SSSR 151. Dokl. Akad Nauk. Soviet Math. Dokl. 4, pp. 501-504, pp. 1035-1038.