References
- Amadei, B., Savage, W. Z., and Swolfs, H. S. (1987), "Gravitational stresses in anisotropic rock masses". Int. J. Rock Mech. Min.Sci. Geomech Abstr., Vol.24, No.1, pp.5-14. https://doi.org/10.1016/0148-9062(87)91227-7
- ASTM. 1986a "Standard test method for unconfined compressive strength of intact rock core specimens", ASTM Stand.
- ASTM. 1993. "Standard test method for elastic moduli of intact rock core specimens in uniaxial compression", ASTM Stand.(D 3148).
- ASTM. 1998, "Standard Test Method for Laboratory Determination of Water(Moisture) Content of Soil and Rock by Mass", ASTM Stand.
- ASTM. 2001. "Standard practices for preparing rock core specimens and determining dimensional and shape tolerances". ASTM Stand.
- ASTM. 2009. "Standard test method for compressive strength and elastic moduli of intact rock core specimens under varying states of stress and temperatures", ASTM Stand.(D 7012-07e1).
- Aughenbaugh, N. B. (1974), "Effect of Moisture on shale", 23rd. Annual Soil Mech. & Found. Eng. Conf.(ASCE Geotechnical Division), pp.1-15.
- Bhasin R. and Hoeg K. (1998), "Numerical modelling of block size effects and influence of joint properties in multiply jointed rock", Tunnelling and Undergroundspace Tech, Vol.13, No.2, pp.181-188. https://doi.org/10.1016/S0886-7798(98)00046-7
- Bieniawski, Z. T. (1967), "Mechanism of Brittle Fracture of Rock, Part2-Experimental Studies", Int. J. of Rock Mech. and Min. Sci., Vol.4, pp.407-423. https://doi.org/10.1016/0148-9062(67)90031-9
- Cho, H. J., Moon, J. K., and Jeong, I. S. (2012a), "A Study on Decreasing Behavior of Strength and Elastic Parameters due to Water Infiltration in Rock Cores(I)". The Journal of Korean Geotechnical Society, Vol.28, No.9, pp.69-83. https://doi.org/10.7843/kgs.2012.28.9.69
- Cho, H. J., Moon, J. K., and Jeong, I. S. (2012b), "A Study on Decreasing Behavior of Strength and Elastic Parameters due to Water Infiltration in Rock Cores(II)". The Journal of Korean Geotechnical Society, Vol.28, No.11, pp.5-17. https://doi.org/10.7843/kgs.2012.28.11.87
- Erguler, Z. A. and Ulusay, R. (2009), "Water induced variations in mechanical properties of clay-bearing rocks", Int. J. Rock Mech. & Min. Sci., Vol.46, pp.355-370. https://doi.org/10.1016/j.ijrmms.2008.07.002
- Gercek, H. (2007), "Poisson's ratio values for rock", Int. J. Rock Mech. & Min. Sci., Vol.44, pp.1-13. https://doi.org/10.1016/j.ijrmms.2006.04.011
- Gill, D. E., Corthesy, R., and Leite, M. H. (2005), Determining the minimal number of specimens for laboratory testing of rock properties, Eng. Geol., Vol.78, pp.29-51 https://doi.org/10.1016/j.enggeo.2004.10.005
- Hawkes, I. and Mellor, M. (1969), "Uniaxial testing in rock mechanics laboratories", Eng. Geol., Vol.4, pp.177-285.
- Hawkins, A. B. and McConnell, B. J. (1992), "Sensitivity of sandstone strength and deformability to changes in moisture content". Q. J. Eng. Geol., Vol.25, pp.115-130. https://doi.org/10.1144/GSL.QJEG.1992.025.02.05
- Heap, M. J. and Faulkner, D. R. (2008), "Quantifying the evolution of elastic properties as crystalline rock approaches failure", Int. J. Rock Mech. & Min. Sci., Vol.45, pp.564-573. https://doi.org/10.1016/j.ijrmms.2007.07.018
- ISRM (1979), "Suggested methods for determining the uniaxial compressive strength and deformability of rock materials", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.16(2), pp.135-140.
- ISRM (1981), Part 1, "Suggested method for determination of the uniaxial compressive strength of rock materials", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.16(2), pp.141-156.
- ISRM (1994), "Suggested methods for determining water content, porosity, density, absorption and properties and swelling and slakedurability index properties", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.31, No.5, pp.547-550. https://doi.org/10.1016/0148-9062(94)90156-2
- ISRM (1999), "Suggested method for the complete stress-strain curve for intact rock in uniaxial compression", Int. J. of Rock Mech. and Min. Sci., Vol.36, No.3, pp.279-289. https://doi.org/10.1016/S0148-9062(99)00006-6
- Kim, J. Y. (1985), "Statistics", Kyung-Mun Sa ed..
- Kim, U. C., Kim, J. J., Park, B. W., Park, S. H., Song, M. S., Lee, S. Y., Lee, Y. J., Juon, J. W., and Cho, S. S.(2005), "Modern Statistics", Col. of Nature, SNU, Young-Ji sa ed.
- Min, K. B. and Jing, L. (2004), "Stress dependent mechanical properties and bounds of Poisson's ratio bfor fractured rock masses investigated by a DFN-DEM technique", Sinorock 2004 Symposium, Int. J. Rock Mech. & Min. Sci., Vol.41, No.3, CD-Rom.
- Wikipedia (2011), http://en.wikipedia.org/wiki/Poisson%27s-ratio.
- Yamaguchi, U. (1970), "The number of test-pieces required to determine the strength of rock", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol.7, No.2, pp.209-227. https://doi.org/10.1016/0148-9062(70)90013-6