참고문헌
- Jaeger, G., Endler, I., Heilmaier, M.,Bartsch, K. and Leonhardt, A., 2000, "A New Method of Determining Strength and Fracture Toughness of Thin Hard Coating," Thin Solid Films, Vol. 332, pp. 195-201.
- Cottrell, B. and Chen, Z., 2000, "Buckling and Cracking of Thin Films on Compliant Substrate Under Compression," Int. J. Fracture, Vol. 104, pp. 169-179. https://doi.org/10.1023/A:1007628800620
- Oh, C.S., Lee, H.J., Ko, S.G., Kim, S.W. and Ahn, H.G., 2003, "Comparison of the Young's Modulus of Polysilicon Film by Tensile Testing and Nanoindentation," Sensor and Actuators A: Physics, Vol. 117, No. 1, pp. 151-158.
- Holmgerg, K., Laukkanen, A., Ronkainen, H., Willin, K. and Varjus, S., 2003, "A Model for Stresses, Crack Generation and Fracture Toughness Calculation in Scratched TiN-Coated Steel Surface," Wear, Vol. 254, pp. 278-291. https://doi.org/10.1016/S0043-1648(02)00297-1
- Bravo-Leon, A., Morikawa, Y., Kawahara, M. and Mayo, M.J., 2002, "Fracture Toughness of Nanocrystalline Tetragonal Zirconia with Low Yttria Content," Acta Mater., Vol. 50, No. 18, pp. 4555-4562. https://doi.org/10.1016/S1359-6454(02)00283-5
- Xia, Z., Curtin, W.A. and Sheldon, B.W., 2004, "A New Method to Evaluate the Fracture Toughness of Thin Films," Acta Mater., Vol. 52, pp. 3507-3517. https://doi.org/10.1016/j.actamat.2004.04.004
- Kim, H.-G., Yi, J.-W., Kim, S.-W., Kim, K.-S. and Kumar, S., 2012, Fracture Toughness Measurement of Free-Standing Nanocrystalline Copper-Chromium Composite Thin Films, Submitted for Publication.
- Pallares, G., Ponson, L., Grimaldi, A., George, M., Prevot, G. and Ciccotti, M., 2009, "Crack Opening Profile in DCDC Specimen," Int. J. Fracture, Vol. 156, pp. 11-20. https://doi.org/10.1007/s10704-009-9341-8
- Masumura, R.A., Hazzledine, P.M. and Pande, C.S., 1998, "Yield Stress of Fine Grained Materials," Acta Mater., Vol. 46, No. 13, pp. 4527-4534. https://doi.org/10.1016/S1359-6454(98)00150-5
- Gertsman, V.Y., Hoffmann, M., Gleiter, H. and Birringer R., 1994, "The Study of Grain Size Dependence of Yield Stress of Copper for Wide Grain Size Range," Acta Mater., Vol. 42, No. 10, pp. 3539-3544. https://doi.org/10.1016/0956-7151(94)90486-3
- Lefebvre, S., Devincre, B. and Hoc, T., 2007, "Yield Stress Strengthening in Ultrafine-Grained Metals: A Two-Dimensional Simulation of Dislocation Dynamics," J. Mech. Phys. Solids, Vol. 55, pp. 788-802. https://doi.org/10.1016/j.jmps.2006.10.002
- Ashby, M.F. and Jones, F.R.H., 1980, Engineering Materials 1: An Introduction to Their Properties and Applications, Pergamon Press.
- Kumar, K.S., Suresh, S., Chisholm, M.F., Horton, J.A. and Wang, P., 2003, "Deformation of Electrodeposited Nanocrystalline Nickle," Acta Mater., Vol. 51, No. 2, pp. 387-405. https://doi.org/10.1016/S1359-6454(02)00421-4
- Kang, Y.-L., Zhang, Z.-F., Wang, H.-W. and Qin, Q.- H., 2005, "Experimental Investigations of the Effect of Thickness on Fracture Toughness of Metallic Foils," Mater. Sci. Eng. A, Vol. 394, pp. 312-319. https://doi.org/10.1016/j.msea.2004.11.044
- Lee, H.Y. and Yu, J., 2000, "Effects of Oxidation Treatments on the Fracture Toughness of Leadframe/Epoxy Interfaces," Mater. Sci. Eng. A, Vol. 277, pp. 154-160. https://doi.org/10.1016/S0921-5093(99)00536-5