Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Theoretical Study of the Circuits for Device of the High Voltage Pulse Generator

고전압 펄스 발생 장치의 회로에 관한 이론적 연구

  • Kim, Young-Ju (Hongik University Science Technology College Department of Electronic & Electrical Engineering)
  • 김영주 (홍익대학교 과학기술대 전자전기공학과)
  • Received : 2012.11.22
  • Accepted : 2012.12.18
  • Published : 2013.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

The high-voltage pulse generator is consist of transformers of fundamental wave and harmonic waves, and shunt capacitances. The pulse has the fundamental wave and the harmonic waves that have been increased as a series circuit by the transformers to make high voltage pulse. This paper shows that pulse generator circuit is analyzed using Miller's theorem and network theory(ABCD Matrix) and simulated in frequency and time domain using Matlab program. The output voltage of pulse were obtained to 2.5kHz, 1.8kV. Output pulse voltage increases as $L_m$ increases in low voltage circuit. In high voltage circuit, outer capacitors are related to frequency band pass characteristics.

Keywords

References

  1. A. Mizuno. et al, "Indoor Air Cleaning using a Pulsed Discharge Plasma," IEEE trans. Industry application, Vol.35, No.6, pp.1284-1287, Nov. 1999. https://doi.org/10.1109/28.806040
  2. Fei Wang et al, "Transient plasma Ignition of Qniescent and Flowing Air/Fuel Mixtures," IEEE Trans. Plasma Sci., Vol.33, No.2, pp.844-849, Aprl. 2005. https://doi.org/10.1109/TPS.2005.845251
  3. Jose' O. Rossi et al, "A 4-kV/2-A/5-kHz Compact Modulation for Nitrogen Plasma Ion Implantation," IEEE Trans. Plasma Sci., Vol.34, No.5, pp.1757-1765, Oct. 2006. https://doi.org/10.1109/TPS.2006.883338
  4. K.H. Schoenbach et al, "Bio electrics-New applications for pulsed power technology," IEEE Trans. Plasma Sci.. Vol.30, No.1, pp.293-300, Feb. 2002. https://doi.org/10.1109/TPS.2002.1003873
  5. S.B. Dev. et al, "Medical applications of electroporation," IEEE Trans. Plasma Sci., Vol.28, No.1, pp.206-223, Feb. 2000. https://doi.org/10.1109/27.842905
  6. K. Yukimura et al, "Two switch high voltage modulator for plasma based ion implantation," Surf. coat. Technol, Vol.156, No.1-3, pp-66-70, Jul. 2002. https://doi.org/10.1016/S0257-8972(02)00114-7
  7. L.M Redondo et al, "A new method to build a high-voltage pulse using only semiconductor Switches for plasma-immersion ion implatation," Surf. Coat. Technol., Vol.136, No.1-3, pp.51-54, Feb. 2001. https://doi.org/10.1016/S0257-8972(00)01010-0
  8. X. Tian et al, "Special modulator for high frequency, low-voltage plasma immersion implantation," Rev. Sci. Instrans., Vol.70, No.3, pp.1824-1827, Mar. 1999. https://doi.org/10.1063/1.1149675
  9. Y. Kim, "Study for the Design and Measurement of the High Voltage Pulse Generator Using Transformers," The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers, 26(1), pp. 82 - 86, 2012.
  10. Y. Kim and J. Shin "Simulation Study of Characteristics for Device of the High Voltage Pulse Generator," The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers, 2012. 12 will be published.
  11. Sedra/Smith "Microelectronic Circuits," pp. 613-615 OXFORD.
  12. David. M. Pozar "Microwave Engineering" pp. 231-234 ADDISON WESLEY.

Cited by

  1. Theoretical Study of Pulse Circuits with the Load Variation for Device of the High Voltage Pulse Generator vol.30, pp.3, 2016, https://doi.org/10.5207/JIEIE.2016.30.3.106