Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Flexural Behaviors of Composite Prestressed Double-T Slab with Concrete Topping

덧침콘크리트가 타설된 프리스트레스트 더블티 슬래브의 휨 거동

  • Received : 2013.07.12
  • Published : 2013.12.25
⟨ Previous Next ⟩

Abstract

KCI(Korea Concrete Institute) structural concrete design code provides provisions for composite concrete members in Chapter 17. However there are no provisions for the flexural strength of composite concrete members. So, the provisions for prestressed members in Chapter 9 are applied to calculate the flexural strength of composite concrete members. The equation to estimate the nominal flexural strength of prestressed members should be validated to apply to composite concrete members. In this paper, the experimental studies and theoretical analysis to investigate the validity of this equation for composite concrete members are presented. 4 specimens whose parameters are the amount and location of shear connector were tested under 4-point bending. Test results show that the full flexural strength of composite section can be developed without shear connectors in case the shear span-to-depth ratio is about 5.6. It is concluded that the equation for flexural strength of prestressed members may be used to estimate the full flexural strength of composite concrete members, because the flexural strength of the prestressed double tee slab with structural concrete topping computed from this equation is more conservative than the flexural strength calculated from strain compatibility and equilibrium method.

Keywords

Acknowledgement

Supported by : 한국건설기술연구원

References

  1. 한국콘크리트학회, 콘크리트구조설계기준 해설, 기문당, 2012
  2. ACI, Bu.ilding Code Requirements for Reinforced Concrete (ACI 318M-08), American Concrete Institute, 2008
  3. C.K. Wang, C.G. Salmon, Reinforced Concrete Design, Fifth Edition, HarperCollins Publishers Inc, 1992
  4. E. Baran, A.E. Schultz, C.E. French, Analysis of the Flexural Strength of Prestressed Concrete Flanged Sections, PCI Journal, V27. No.1, 2005
  5. AASHTO, AASHTO LRFD Bridge Design Specifications, 4th Edition, American Association of State Highway and Transportation Officials, Washington, DC, 2007
  6. Naaman, A.E., Ultimate Analysis of Prestressed and Partially Prestressed Sections by Strain Compatibility, PCI Journal, V.22, No.1, 1977
  7. Alan H. Mattock, Flexural Strength of Prestressed Concrete Sections by Programmable Calculator, PCI Journal, V.23, No.1, 1979
  8. PCI, PCI Design Handbook - Precast and Prestressed Concrete, 6th edition, Precast/Prestressed Concrete Institute, 2004
  9. ASTM, A416/A416M-12a Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete, American Society for Testing and Materials, 2012
  10. 한국표준협회, 한국산업규격 KS D 7002 : 2011 PC 강선 및 PC 강연선, 한국표준협회, 2011
  11. 허석재 외 5인, 와플 형상을 가지는 프리캐스트 프리스트레스 콘크리트 슬래브의 구조성능, 대한건축학회논문집 구조계, 제26권 제1호, 2010
  12. 장혜진 외 4인, 프리스트레스트 하프 PC형 중공슬래브의 휨성능 평가, 대한건축학회논문집 구조계, 제28권 제2호, 2012