Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Shear Buckling Analysis and Boundary Condition of Sinusoidal Corrugated Plate by Using ABAQUS

ABAQUS를 이용한 정현파형 주름판의 전단좌굴해석과 경계조건에 관한 연구

  • 유미나 (한국기술교육대 건축공학과 대학원) ;
  • 손수덕 (한국기술교육대 건축공학부) ;
  • 이승재 (한국기술교육대 건축공학부) ;
  • 강주원 (영남대 건축학부)
  • Received : 2013.07.04
  • Published : 2013.11.25
⟨ Previous Next ⟩

Abstract

The characteristics of shear buckling about corrugated plates affect web height as well as the corrugated plate. Besides, there are complex phenomena, separated by local buckling, global buckling and ductility buckling. For this reason, the experimental and analytical study of corrugated webs are mainly conducted on shear buckling behavior and stability, whereas analytical study mainly uses commercial software. However, there are some differences between the application of boundary conditions and element modeling in the literature for each one. This study was performed to study about appropriate boundary condition in finite element analysis for sinusoidal corrugated plate. The analysis in this study was compared to shear buckling strength about each boundary condition with the plate shear theory, and shear buckling strength was obtained by converting the eigenvalues about primary mode. From the result of the analysis, the proposed boundary condition was demonstrated better condition.

Keywords

Acknowledgement

Supported by : 국토해양부

References

  1. Easley, J. T. and McFarland, D. E., Buckling of Light-gage Corrugated Metal Shear Diaphragms, Journal of the Structu ral Division, ASCE, 95(ST7), p.p. 1497-1516, 1969
  2. Elgaaly, M. and Dagher, H., Beams and Girders with Corru gated Webs, Proceeding, SSRC Annual Technical Session, Bethlehem, PA, p.p.37-53, 1990
  3. Abbas, H. H., Sause, R. and Driver, R. G., Shear Strength and Stability of High Performance Steel Corrugated Web Girders, Proceedings, Structural Stability Research Council, p. p.361-387, 2002
  4. Moon, J. H., Yi, J. W., Choi, B. H., and Lee, H .E., Shear Strength and Design of Trapezoidally Corrugated Steel Webs, Journal of Constructional Steel Research, 65(5), p.p.1198 -1205, 2009 https://doi.org/10.1016/j.jcsr.2008.07.018
  5. 한택희, 임남형, 박남회, 강영종, 원형 파형 판의 탄성전단좌굴 특성, 한국강구조학회 논문집, 14(4), p.p.529-539, 2002
  6. 김성남, Ngoc Duong Nguyen, 한승룡, 강영종, 파형 복부판 거더의 횡비틀림 좌굴 강도, 2011년도 학술대회발표집, 한국강구조학회, p.p.125-126, 2011
  7. 오재열, 이득행, 김강수, 황진하, 파형보의 아코디온효과에 대한 해석적 연구, 2011년도 학술대회발표집, 한국강구조학회, p. p.285-286, 2011
  8. 지효선, 파형 복부판을 갖는 플레이트 거더의 좌굴거동, 강구조학회논문집, 한국강구조학회, 23(2), p.p.221-228, 2011
  9. Elgaaly, M. and Dagher, H., Beams and Girders with Corru gated Webs, Proceedings, SSRC Annual Technical Session, Bethlehem, PA, p.p.37-53, 1990
  10. Chan, C. L., Khalid, Y. A., Sahari, B. B., and Hamouda, A. M. S., Finite Element Analysis of Corrugated Web Beams under Bending, Journal of Constructional Steel Research,58(11), p.p.1391-1406, 2002 https://doi.org/10.1016/S0143-974X(01)00075-X
  11. Abbas, H. H., Analysis and Design of Corrugated Web Igirders for Bridges using High Performance Steel, Ph.D thsis, Lehigh University, Bethlehem, Pa, 2004
  12. Driver, R., Abbas, H. H., and Sause, R., Shear Behavior of Corrugated Web Bridge Girders, Journal of Structural Engi neering, ASCE, 132(2), p.p.195-203, 2006 https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(195)
  13. 김성남, 전진수, 느규옌 반 반, 강영종, 파형 복부판을 갖는 I형 거더의 비틀림 거동 연구, 2008년도 학술발표회논문집, 한국강구조학회, p.p.407-410, 2008
  14. 이재민, 김성남, 한금호, 강영종, 파형 복부판 I형 거더의 비틀림 거동에 대한 해석적 연구, 2009년도 학술발표회논문집, 한국강구조학회, p.p.119-120, 2009
  15. 뉴웬 녹 융, 김성남, 강영종, 순수휨을 받는 사인 파형 복부판 I형 거더의 횡-비틀림 좌굴 강도, 2010년도 학술발표회논문집, 한국강구조학회, p.p.77-78, 2010
  16. 윤상열, 김성남, 한택희, 강영종, 제형파형 Plate의 탄성전단 좌굴 특성, 2002년도 추계학술대회논문집, 한국철도학회, p.p. 709-714, 2002
  17. ABAQUS/CAE User's Manual, ABAQUS Version 6.5
  18. 한택희, 波形Plate의 탄성전단좌굴 특성, 고려대학교 석사학위논문, 2000
  19. 이필구, 윤태양, 이학은, 이승록, 파형강판 복부의 전단좌굴거동 연구, 2003년도 봄 학술발표회 논문집, 한국전산구조공학회, p.p.513-520, 2003