References
- Segal, V. M., "Equal channel angular extrusion: from macromechanics to structure formation," Mater. Sci. and Eng., Vol. A271, No. 1-2, pp. 322-333, 1999. https://doi.org/10.1016/S0921-5093(99)00248-8
- Iwahashi, Y., Horita, Z., Nemoto, M., and Landon, T. G., "The process of grain refinement in equalchannel angular pressing," Acta Mater., Vol. 46, No. 9, pp. 3317-3331, 1998. https://doi.org/10.1016/S1359-6454(97)00494-1
- Iwahashi, Y., Wang, J., Horita, Z., Nemoto, M., and Langdon, T. G., "Principle of equal-channel angular pressing for the processing of ultra-fine grained materials," Scripta Mater., Vol. 35, No. 2, pp. 143-146, 1996. https://doi.org/10.1016/1359-6462(96)00107-8
- Nakashima, K., Horita, Z., Nemoto, M., and Langdon, T. G., "Development of a multi-pass facility for equal-channel angular pressing to high total strains," Mater. Sci. and Eng., Vol. A281, No. 1-2, pp. 82-87, 2000.
- Iwahashi, Y., Horita, Z., Nemoto, M., and Langdon, T. G., "An investigation of microstructural evolution during equal-channel angular pressing," Acta Mater., Vol. 45, No. 11, pp. 4733-4741, 1997. https://doi.org/10.1016/S1359-6454(97)00100-6
- Sun, P. L., Kao, P. W., and Chang, C. P., "Characteristics of submicron grained structure formed in aluminum by equal channel angular extrusion," Mater. Sci. and Eng., Vol. A283, No. 1-2, pp. 82-85, 2000. https://doi.org/10.1016/S0921-5093(99)00800-X
- Gholinia, A., Prangnell, P. B., and Markushev, M. V., "The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE," Acta Mater., Vol. 48, No. 5, pp. 1115-1130, 2000. https://doi.org/10.1016/S1359-6454(99)00388-2
- Kim, K. J., Yang, D. Y., and Yoon, J. W., "Investigation of microstructure characteristics of commercially pure aluminum during equal channel angular extrusion," Mater. Sci. and Eng., Vol. A485, No. 1-2, pp. 621-626, 2008.
- Kim, K. J., Yang, D. Y., and Yoon, J. W., "Microstructural evolution and its effect on mechanical properties of commercially pure aluminum deformed by ECAE (Equal Channel Angular Extrusion) via routes A and C," Mater. Sci. and Eng., Vol. A527, No. 29-30, pp. 7927-7930, 2010.
- Kwon, G. H., Chae, S. W., Kwun, S. I., Kim, M. H., and Hwang, S. K., "Frictional Effects on the Deformation Behavior of Materials and Die during Equal Channel Angular Pressing (ECAP) with Pure-Zr," J. of the KSPE, Vol. 18, No. 6, pp. 182-187, 2001.
- Nakashima, K., Horita, Z., Nemoto, M., and Langdon, T. G., "Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing," Acta Mater., Vol. 46, No. 5, pp. 1589-1599, 1998. https://doi.org/10.1016/S1359-6454(97)00355-8
- Valiev, R. Z. and Langdon, T. G., "Principles of equal-channel angular pressing as a processing tool for grain refinement," Prog. Mater. Sci., Vol. 51, No. 7, pp. 881-981, 2006. https://doi.org/10.1016/j.pmatsci.2006.02.003
- Saito, Y., Utsunomiya, H., Sakai, T., and Hong, R. G., "Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process," Scripta Mater., Vol. 39, No. 9, pp. 1221-1227, 1998. https://doi.org/10.1016/S1359-6462(98)00302-9
- Saito, Y., Utsunomiya, H., Tsuji, N., and Sakai, T., "Novel ultra-high straining process for bulk materials-development of the accumulative rollbonding (ARB) process," Acta Mater., Vol. 47, No. 2, pp. 579-583, 1999. https://doi.org/10.1016/S1359-6454(98)00365-6
- Tsuji, N., Saito, Y., Utsunomiya, H., and Tanigawa, S., "Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process," Scripta Mater., Vol. 40, No. 7, pp. 795-800, 1999. https://doi.org/10.1016/S1359-6462(99)00015-9
- Nishida, Y., Arima, H., Kim, J. C., and Ando, T., "Rotary-die equal channel angular pressing of an Al-7 Mass% Si-0.35 Mass% Mg alloy," Scripta Mater., Vol. 45, No. 3, pp. 261-266, 2001. https://doi.org/10.1016/S1359-6462(01)00985-X
- Yoon, S. C., Seo, M. H., and Kim, H. S., "Finite Element Analysis of Continuous Rotary-Die Equal Channel Angular Pressing," Trans. Mater. Process., Vol. 15, No. 7, pp. 524-528, 2006. https://doi.org/10.5228/KSPP.2006.15.7.524
- Talebanpour, B., Ebrahimi, R., and Janghorban, K., "Microstructural and mechanical properties of commercially pure aluminum subjected to Dual Equal Channel Lateral Extrusion," Mater. Sci. and Eng., Vol. A527, No. 1-2, pp. 141-145, 2009. https://doi.org/10.1016/j.msea.2009.07.040
- Kocich, R., Gregera, M., Kursa, M., Szurman, I., and Machackova, A., "Twist channel angular pressing (TCAP) as a method for increasing the efficiency of SPD," Mater. Sci. and Eng., Vol. A527, No. 23, pp. 6386-6392, 2009.
- Shahbaz, M., Pardis, N., Ebrahimi, R., and Talebanpour, B., "A novel single pass severe plastic deformation technique: Vortex extrusion," Mater. Sci. and Eng., Vol. A530, pp. 469-472, 2011.
- Mani, B., Jahedi, M., and Paydar, M. H., "A modification on ECAP process by incorporating torsional deformation," Mater. Sci. and Eng., Vol. A528, No. 12, pp. 4159-4165, 2011.
Cited by
- Effects of Processing Routes on the Deformation Behavior of an AZ61 Mg Alloy by Half Channel Angular Extrusion(HCAE) using 3D Finite Element Analysis vol.23, pp.3, 2014, https://doi.org/10.5228/KSTP.2014.23.3.151