DOI QR코드

DOI QR Code

건설장비 안전사고 저감을 위한 위험성평가

Risk Assessment for Reducing Safety Accidents caused by Construction Machinery

  • Jeon, Hyun Woo (Division of Architecture and Urban Design, Incheon National University) ;
  • Jung, In Su (Korea Institute of Construction Technology) ;
  • Lee, Chan Sik (Division of Architecture and Urban Design, Incheon National University)
  • 투고 : 2013.07.16
  • 심사 : 2013.10.15
  • 발행 : 2013.10.31

초록

Construction machinery has been utilized to carry out construction works effectively. Using construction machinery enables a builder to reduce the time and the cost needed for the construction, but the fatal accident caused by it has been increased. This study is intended to identify risk magnitude of accident by kind of construction machinery through interviews with experts. Construction machineries surveyed in this research are excavator, tower crane, lift, mobile crane and forklift, those are the machinery which accident occurs more often than the other machinery. To evaluate the risk of the accidents identified, risk category was determined according to the US DOD system safety program (MIL-STD-882B) considering the risk degree and intensity. As a result, accident occurred in the process of material transport & handling was found to be the most dangerous. On the other hand, the accidents caused by the defective machinery and the poor safety gear were considered to be less dangerous relatively. The risk category by type of construction machinery suggested in this study is expected to provide the basic data in developing the safety guidance for construction project.

키워드

참고문헌

  1. J. M. Seo and S. K. Kim, "The Study on Measures for Reducing Safety Accidents of Excavator", Journal of the Korea Institute of Building Construction, Vol. 8, No. 3, pp.127-133, 2008. https://doi.org/10.5345/JKIC.2008.8.3.127
  2. D. Y. Kim, "A Fundamental Study on Safety Management for High-rise Building Tower Crane Operators", Journal of Architectural Institute of Korea, Vol. 28, No. 2, pp.59-66, 2013.
  3. H. Y. Kwak, "A Study on the Mobile Crane a Accident Case through the Analysis of Safety Measures", Department of Industrial and Management Engineering, Graduate School, Myongji University, 2013.
  4. T. K. Kim, "A Study on the Risk Assessment of Lifting Equipments using in the High-rise Building Constriction Work", Department of Industrial and Management Engineering, Graduate School, Seoul National University of Science and Technology, 2013.
  5. Y. S. Lee, Y. T. Gang, J. S. Kim and C. E. Kim, "The Study on the Accidents analysis and preventive Measures form a excavator", Journal of Korea Safety Management & Science, Vol. 12, No. 3, pp.81-91, 2010.
  6. Y. K. Park, "A Study on the Analysis and Prevention of Industrial Accident for Forklift", Department of Industrial Engineering, Graduate School, Myongji University, 2003.
  7. K. S. Choi, H. K. Kim and Y. S. Kim, "A Study on the Practical use Status and Problem Analysis of Construction Lifts", Journal of Architectural Institute of Korea, Vol. 22, No. 2, pp.479-482, 2002.
  8. V. W. Y. Tam and I.W. H. Fung, "Tower Crane Safety in the Construction Industry : A Hong Kong Study", Journal of Safety Science Vol. 49, Science Direct, pp. 208-215, 2011. https://doi.org/10.1016/j.ssci.2010.08.001
  9. A. Shapira, Gunnar Lucko and Clifford J. Schexnayder, "Cranes for Building Construction Project", Journal of Construction Engineering and Management, Vol. 131, No. 6, ASCE, pp. 690-700, 2007.
  10. M. A. Hussein, S. Alkass and O. Moselhi, "Optimization Algorithm for Selection and Site Location of Mobile Cranes", Journal of Construction Engineering and Management, Vol. 131, No. 5, ASCE, pp. 579-590, 2005. https://doi.org/10.1061/(ASCE)0733-9364(2005)131:5(579)
  11. S. Tamate, N. Suemasa and T. Katada "Analyse of Instability in Mobile Cranes due to Ground Penetration by Outrigger", Journal of Construction Engineering and Management, Vol. 131, No. 6, ASCE, pp. 689-704, 2005. https://doi.org/10.1061/(ASCE)0733-9364(2005)131:6(689)
  12. H. H. Kim and G. Lee, "An Analysis of the Accident Types and Causes of Construction Cranes", Journal of the Korea Institute of Building Construction, Vol. 7, No. 1, pp.109-112, 2007. https://doi.org/10.5345/JKIC.2007.7.4.109
  13. H. S. Kim, H. S. Lee and M. S. Park "Quantitative Risk Assessment Methodology for Construction Site", Journal of Korea Institute of Construction Engineering and Management, pp.463-466, 2008.
  14. Department of Defense "System Safety Program Requirements MIL-STD-882B", 1977.