References
- V. F. Zackay, E. R. Parker, D. Fahr and R. Busch, 1967, "The enhancement of ductility in high strength steels", Trans. Am. Soc. Metals60, pp. 252-259.
- R. A. Kot and V. Weiss, 1970, "Transformation plasticity in iron-nickel alloys", Metall. Trans. Vol. 1, pp. 2685-2693.
- J. Y. choi, J. H. Ji, S. W. Hwang, K. T. Park, 2012, "TRIP aided deformation of a near-Ni-Free, Mn-N bearing duplex stainless steel", Mater. Sci. Eng.(A), Vol. 535, pp. 32-39. https://doi.org/10.1016/j.msea.2011.12.037
- J. Y. choi, J. H. Ji, S. W. Hwang, K. T. Park, 2012, "Effects of nitrogen content on TRIP of Fe-20Cr-5Mn-xN duplex stainless steel", Mater. Sci. Eng.(A), Vol. 534, pp. 673-680. https://doi.org/10.1016/j.msea.2011.12.025
- J. Y. Choi, J. H. Ji, S. W. Hwang, K. T. Park, 2011, "Strain induced martensitic transformation of Fe-20Cr-5Mn-0.2Ni duplex stainless steel during cold rolling : Effects of nitrogen addition" Mater. Sci. Eng.(A), Vol. 528, pp. 6012-6019. https://doi.org/10.1016/j.msea.2011.04.038
- J. Y. Park and Y. S. Ahn, 2012, "Effect of alloying composition and plastic deformation on the microstructure of 22Cr micro-duplex stainless steel", Korean J. Met. Mater, Vol. 50, No. 11, pp. 793-800.
- A. L. Schaeffler, 1949, "Constitution diagram for stainless steel", Metall. Prog., Vol. 56, pp. 680-680B.
- J. He, G. Han, S. Fukuyama, K. Yokogawa, 1999, "Tensile behavior of duplex stainless steel at low temperatures", Mater. Sci. Technol, Vol. 15, pp. 909-920. https://doi.org/10.1179/026708399101506715
- T. H. Lee , C. S. Oh , S. J. Kim, 2008, "Effect of nitrogen on deformation-induced martensitic transformation in metastable austenitic Fe-18Cr-10Mn-N steels", Scripta Materialia Vol. 58, No. 2, pp. 110-113. https://doi.org/10.1016/j.scriptamat.2007.09.029
- D. Y. Ryoo, N. Kang, C. Y. Kang, 2011, "Effect of Ni contant on the tensile properties and strain-induced martensite transformation for 304 stainless steel", Mater. Sci. Eng., A Vol. 528 No. 6 pp. 2277-2281. https://doi.org/10.1016/j.msea.2010.12.022
- T. Suzuki, H. Kojima, K. Suzuki, T. Hashimoto, S. Koike and M. Ichihara, 1976, "Plastic deformation and martensitic transformation in an iron-base alloy", Scripta Metallurgica, Vol. 10, No. 4, pp. 353-358. https://doi.org/10.1016/0036-9748(76)90091-0
- T. Angel, 1954, "Formation of martensite in austenitic stainless steels", Journal of the Iron and Steel Institute, Vol. 177, pp. 165-174.
- N. C. Goel, S. Sangal, 1985, "A theoretical model for the flow behavior of commercial dual-phase steels containing metastable retained austenite: PartI. Derivation of flow curve equations", K. Tangri, Metall. Trans., Vol. 16A, No. 1985, pp. 2013-2021.
- K. I. Sugimoto, M. Kobayashi, S. I. Hashimoto, 1992, "Ductility and strain-induced transformation in a high-strength transformation-induced plasticity-aided dual-phase steel", Metall. Trans. A, Vol. 23A, No. 1992, pp. 3085-3091.
- T. Y Hur, H. S. Han, S. H. Lee, C. Y. Kang, 2012, "Effect of Deformation Induced Martensite Transformation on the Mechanical Properties in Austenitic Stainless Steel with High Mn", The Korea Soci. for Power System Eng, Vol. 16, No. 4, pp. 51-56.
- B. C. Hwang, Y. G. Kim, S. H. Lee, W. G. Kim, D. H. Shin, 2006, "Dynamic deformation behavior of an ultra-fine-grained dual phase steel fabricated by equal channel angular pressing", J. Kor. Inst. Met. & Mater. Vol. 44, No. 11. pp. 734-740
Cited by
- Influence of full annealing on microstructure and mechanical properties of AISI 1035 steel vol.3, pp.4, 2013, https://doi.org/10.1088/2631-8695/ac344c