DOI QR코드

DOI QR Code

Preparation of Pelletized Porous Adsorbent with Pyrolysis Temperature and Its Toluene Gas Adsorption Characteristics

열분해 조건에 따른 펠렛형 다공성 흡착재의 제조 및 톨루엔 가스 흡착 특성

  • Kim, Do Young (Department of Applied Chemistry and Biological Engineering, Chungnam National University) ;
  • Kim, Yesol (Department of Applied Chemistry and Biological Engineering, Chungnam National University) ;
  • Cho, Seho (Department of Applied Chemistry and Biological Engineering, Chungnam National University) ;
  • Jung, Jin-Young (Department of Applied Chemistry and Biological Engineering, Chungnam National University) ;
  • Kim, Min Il (GTsien) ;
  • Lee, Young-Seak (Department of Applied Chemistry and Biological Engineering, Chungnam National University)
  • 김도영 (충남대학교 바이오응용화학과) ;
  • 김예솔 (충남대학교 바이오응용화학과) ;
  • 조세호 (충남대학교 바이오응용화학과) ;
  • 정진영 (충남대학교 바이오응용화학과) ;
  • 김민일 (지티사이언) ;
  • 이영석 (충남대학교 바이오응용화학과)
  • Received : 2013.05.06
  • Accepted : 2013.08.21
  • Published : 2013.12.10

Abstract

In this study, we prepared pelletized porous carbon adsorbent (PCA) according to the different pyrolysis temperature using activated carbon and polyvinyl alcohol (PVA) as a binder for the removal of toluene, which is one of the representative volatile organic compounds (VOCs). We investigated physical characteristics of PCA using FE-SEM, BET, TGA and evaluated their adsorption capacity for toluene using GC. It was confirmed that the formability of pellets composed of the activated carbon, PVA and solvent of mass mixing ratio was 1 : 0.2 : 0.8 was the most outstanding. Toluene adsorption capacity was evaluated by measuring the maximum time when more than 99% of toluene adsorbed on the pellet. The specific surface area of the adsorbent pyrolyzed at $300^{\circ}C$ was measured as 4.7 times in $941.9m^2/g$ compared to that of the unpyrolyzed pellet. Micropore volume and toluene adsorption capacity of PCA increased fivefold to be 0.30 cc/g and thirteenfold to be 26 hours compared to that of the unpyrolyzed pellet, respectively. These results were attributed to the change of pore size and specific surface area due to the PVA content and the different pyrolysis temperature.

본 연구에서는 대표적 휘발성유기화합물(volatile organic compounds, VOCs)인 톨루엔(toluene)을 제거하고자 활성탄소와 폴리비닐알코올(polyvinyl alcohol, PVA)을 바인더로 이용하여 여러 가지 열분해 온도에 따른 펠렛형 다공성 탄소 흡착재를 제조하였다. 제조된 펠렛형 다공성 탄소 흡착재의 물리적 특성은 주사전자현미경(FE-SEM), 비표면적측정장치(BET), 열중량분석기(TGA)를 통하여 분석하였으며, 톨루엔 가스 흡착능은 가스크로마토그래피(GC)를 이용하여 분석하였다. 활성탄소, PVA 및 용매가 각각 1 : 0.1 : 0.8의 질량 비율로 배합될 경우 펠렛의 성형성이 가장 뛰어났다. 톨루엔 흡착 성능은 펠렛에 99% 이상의 톨루엔이 흡착되는 최대 시간을 측정하여 평가하였다. $300^{\circ}C$에서 열처리된 흡착재 비표면적은 열처리 전에 비하여 약 4.7배 증가된 약 $941.9m^2/g$로 측정되었다. 펠렛형 다공성 탄소 흡착재의 미세 기공의 부피는 0.30 cc/g으로 약 5배, 톨루엔 흡착 능력은 26 h으로 약 13배로 각각 증가하였다. 이는 바인더의 함량 및 열분해 온도 변화에 따른 활성탄소의 기공 크기 및 비표면적 변화에 의한 것으로 판단된다.

Keywords

References

  1. T. J. Lee, J. D. Lee, and W. C. Chang, A Study on Oxidative Decomposition of Toluene for Control of VOCs Emissions, J. Korean Ind. Eng. Chem., 14, 519-525 (2003).
  2. S. K. Park and H. C. Kim, Reduction of Volatile Organic Compounds Emitted from Automobile Felt by Activated Carbon and Hollow Core/Mesoporous Shell Carbon Ball, Appl. Chem. Eng., 21, 680-683 (2010).
  3. K. W. Chung, J. M. Kim, S. B. Lee, I. K. Hong, and J. D. Lee, Reaction Media (SCF) Effect in VOCs Mixture Decomposition Process, Appl. Chem., 5, 327-330 (2001).
  4. S. W. Kang, H. T. Song, B. H. Min, and S. S. Suh, A study on measurement of mass transfer coefficient with breakthrough curve for benzene, Appl. Chem., 7, 321-324 (2003).
  5. J. S. Hyun, S. H. Lee, Y. J. Rhim, and B. M. Min, A Study on Cyclone Combustion System for Efficient Thermal Oxidation of VOC, KSEE, 13, 112-117 (2004).
  6. H. J. Lim and T. Y. Kim, Technology of VOCs Removal by using Oxidation Complex Compounds, Prospectives of Industrial Chemistry, 5, 33-38 (2002).
  7. S. S. Kim, C. H. Lee, and S. W. Park, Adsorption Analysis of VOCs of Zeolite Synthesized by Coal Fly Ash in a Fixed-bed Adsorber, Korean Chem. Eng. Res., 48, 784-790 (2010).
  8. H. S. Kim and Y. S. Park, Adsorption Characteristics of Volatile Organic Compounds-BTX on Activated Carbon Fiber, J. KOSAE, 15, 805-812 (1999).
  9. M. W. Jung, K. H. Ahn, Y. H. Lee, K. P. Kim, J. S. Rhee, J. T. Park, and K. J. Paeng, Mircrochem. J., 70, 123-131 (2001). https://doi.org/10.1016/S0026-265X(01)00109-6
  10. X. S. Zhao, Q. Ma, and G. Q. (Max) Lu, VOC Removal: Comparison of MCM-41 with Hydrophobic Zeolites and Activated Carbon, Energy Fuels, 12, 1051-1054 (1998). https://doi.org/10.1021/ef980113s
  11. K. J. Woo, S. D. Kim, and S. H. Lee, Adsorption Characteristics of Multi-component VOCs Including Poorly Adsorbable Chemicals on Activated Carbonaceous Adsorbents, Korean Chem. Eng. Res., 45, 277-285 (2007).
  12. J. H. Kim, Material Approach for Environment, Ceramist, 10, 259-278 (1995).
  13. C. F. Guerra, J. G. Snijders, G. te Velde, and E. J. Baerends, Towards an order-N DFT method, Theor. Chem. Acc., 99, 391-403 (1998).
  14. N. A. Seaton, J. P. R. B. Walton, and N. Quirke, A new analysis method for the determination of the pore size distribution of porous carbons from nitrogen adsorption measurement, Carbon, 27, 853-861 (1989). https://doi.org/10.1016/0008-6223(89)90035-3
  15. S. J. Park and Y. S. Jang, Effect of micropore filling by silver and anty-bacterial activity of activated carbon fiber surface treated with $AgNO_{3}$, J. Korean Ind. Eng. Chem., 13, 166-172 (2002).
  16. S. K. Park and H. C. Kim, Cabin Air Filter Media Produced by Needle Punching Process, J. Korean Ind. Eng. Res., 20, 561-564 (2009).
  17. H. H. An, A Study on VOCs Adsorption Propertires Using Fine-fiber, KIGAS, 14, 35-40 (2010).
  18. W. C. Oh, The Properties of Carbonaceous Desiccant Derived from Phenolic Resin, Anal. Sci. Technol., 13, 332-337 (2000).
  19. T. W. Kim and H. Moon, Characterization of Industrial Wastewater for Removal of TOC by GAC Adsorption, J. of Adv. Eng. and Tech., 1, 375-381 (2008).
  20. B. J. Holland, and J. N. Hay, The thermal degradation of poly(vinyl alcohol), Polymer, 42, 6775-6783 (2001). https://doi.org/10.1016/S0032-3861(01)00166-5
  21. J. W. Gilman, D. L. VanderHart, and T. Bismaleimides, Thermal Decomposition Chemistry of Poly(vinyl alcohol), Fire and Polymers II: Materials and Test for Hazard, G. L. Nelson, 599, 161-185, American Chemical Society, Washington DC (1995).
  22. S. H. Jhung and J. S. Chang, Adsorption and Storage of Natural Gas by Nanoporous Adsorbents, J. Korean Ind. Eng. Res., 20, 117-125 (2009).
  23. Y. H. Cho, J. G. Na, S. S. Kim, J. G. Kim, and S. H. Chung, Development of a Catalyst/Sorbent for Methane-Steam Reforming, J. Korean Ind. Eng. Chem., 44, 307-313 (2006).

Cited by

  1. Preparation of Gas Sensor from Pitch-based Activated Carbon Fibers and Its Toxic Gas Sensing Characteristics vol.25, pp.2, 2014, https://doi.org/10.14478/ace.2014.1006
  2. Adsorption Characteristics of Toluene Gas Using Fluorinated Phenol-based Activated Carbons vol.26, pp.5, 2015, https://doi.org/10.14478/ace.2015.1083
  3. Evaluation of acetaldehyde removal performance of a hybrid adsorbent consisting of organic and inorganic materials vol.17, pp.4, 2018, https://doi.org/10.15250/joie.2018.17.4.372
  4. Removal of acetaldehyde from gas streams using silica gel as adsorbent vol.18, pp.4, 2013, https://doi.org/10.15250/joie.2019.18.4.340