Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Recent Study in Variation of Welding Materials for Overlay Welding

오버레이 용접에 있어서 용접재료에 따른 최신 연구동향

  • 유호천 (한국과학기술정보연구원 ReSEAT 프로그램)
  • Received : 2013.08.16
  • Accepted : 2013.12.05
  • Published : 2013.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recent developing tendency of overlay welding on welding materials are studied by searching of NDSL, Science Direct, KIPRIS and so on. Fe, Co, Ni and WC are selected as welding materials. Development and improvement of various new overlay welding technology, especially improvement of quality and formation of crack are introduced. Also the prospective technologies of overlay welding are anticipated.

Keywords

References

  1. N. Venkateswara Rao et al. : Weld overlay cladding of high strength low alloy steel with austenitic stainless steel, Materials and Design 32 (2011) 2496-2506 https://doi.org/10.1016/j.matdes.2010.10.026
  2. Kobe Seikosyo Co. Iztani et al. : flux-cored welding wire and arc welding method for overlay welding using the same, Korean unexamined patent 10-2012-0024360 (in Korean)
  3. Pan Yong-ming et al. : Research on overlaying welding rod of high hardness maraging steel. China Surf Eng 19(3) (2006) 465-467
  4. Lu Shan Ping et al. : Microstructure and wear property of Fe-Mn-Cr-Mo-V alloy cladding by submerged arc welding, J Mater Proc Technol. 147 (2004) 191-196 https://doi.org/10.1016/j.jmatprotec.2003.12.016
  5. S. Zhou et al. : Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding, Optics & Laser Technology 44 (2012) 190-197 https://doi.org/10.1016/j.optlastec.2011.06.017
  6. Xiaowen Qi et al. : Effects of vanadium additive on structure property and tribological performance of high chromium cast iron hardfacing metal, Surface & Coatings Technology 205 (2011) 5510-5514 https://doi.org/10.1016/j.surfcoat.2011.06.027
  7. Hao Feifei : Effects of rare earth oxide on hardfacing metal microstructure of medium carbon steel and its refinement mechanism, JOURNAL OF RARE EARTHS, 29-6 (2011) 609-613 https://doi.org/10.1016/S1002-0721(10)60507-8
  8. Hao Feifei : Effect of rare earth oxides on the morphology of carbides in hardfacing metal of high chromium cast iron, JOURNAL OF RARE EARTHS, 29-2 (2011) 168-172 https://doi.org/10.1016/S1002-0721(10)60425-5
  9. Nidetz Hard Co., Maruyama Takamiz : Roll for use in continuous casting, Korean unexamined patent 10-2011-0070993 (in Korean)
  10. KITECH : Metal Cored Wire for Overlay Welding, Korean unexamined patent, 10-2011-0120645 (in Korean)
  11. Kyu-Ho Han et al. : GMA hardfacing weld-ability of Fe-Cr-C metal cored wire, Journal of the Korean Welding and Joining Society, Autumn (2004) 177-179
  12. Min-Ho Kim, Tae-Young Kim : Machining Characteristics and Cutting Force Analysis of Hardfacing Overlay Welding in High Chromium Carbide, Journal of the Korean Society of Machine Tool Engineers, 18-5 (2009) 469-476 (in Korean)
  13. Jong-Chul Kim and Kyeung-Chae Park : Wear Resistance Characteristics of Iron System MAG Weld Overlays with Chromium and Niobium Carbide Composite, Journal of the KWS, 20-3 (2002) 310-315 (in Korean)
  14. Youngil Kim et al. : Evaluation of ferritic stainless steel FCA overlay weld metal ductility, Journal of the KWJS, Spring (2006) 140-142 (in Korean)
  15. Shihong Shi et al. : Study of cobalt-free, Fe-based alloy powder used for sealing surfaces of nuclear valves by laser cladding, Nuclear Engineering and Design 245 (2012) 8-12 https://doi.org/10.1016/j.nucengdes.2012.01.015
  16. Lee, K. Y. et al. : Sliding wear behavior of hardfacing alloys in a pressurized water environment. Wear 262 (2007) 845-849 https://doi.org/10.1016/j.wear.2006.08.015
  17. Bahn, C. B. et al. : Wear performance and activity reduction effect of Co-free valves in PWR environment, Nuclear Engineering and Design 231, (2004) 51-65 https://doi.org/10.1016/j.nucengdes.2004.02.001
  18. Yoon Byoung Hyun et al. : Wear Behavior of Plasma Transferred Arc Deposited Layers for Ni- and Co-base alloy, 19-2 (2001) 540-547 (in Korean)
  19. Kwon-Yeong Lee et al. : Sliding wear behavior of hardfacing alloys in a pressurized water environment, Wear 262 (2007) 845-849 https://doi.org/10.1016/j.wear.2006.08.015
  20. In Chul Jung et al. : Overlay Welding of Inconel Material for Nuclear Power Components, Journal of KWJS, 27(2) (2009) 122-124 (in Korean) https://doi.org/10.5781/KWJS.2009.27.2.004
  21. D. Kesavan, M. Kamaraj : The microstructure and high temperature wear performance of a nickel base hardfaced coating, Surface and Coating Technology 204 (2010) 4034-4043 https://doi.org/10.1016/j.surfcoat.2010.05.022
  22. T. Liyanage et al. : Influence of alloy chemistry on microstructure and properties in NiCrBSi overlay coatings deposited by plasma transferred arc welding, Surface & Coatings Technology 205 (2010) 759-765 https://doi.org/10.1016/j.surfcoat.2010.07.095
  23. C. Sudha et al. : Microchemical and micro-structural studies in a PTA weld overlay of Ni-Cr-Si-B alloy on AISI 304L stainless steel, Surface & Coatings Technology, 202 (2008) 2103-2112 https://doi.org/10.1016/j.surfcoat.2007.08.063
  24. C. Katsich, E. Badisch : Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions, Surface & Coatings Technology 206 (2011) 1062-1068 https://doi.org/10.1016/j.surfcoat.2011.07.064
  25. N. Y. Sari, M. Yilmaz : Improvement of wear resistance of wire drawing rolls with Cr-Ni-B-Si + WC thermal spraying powders, Surface and Coating Technology 202 (2008) 3136-3141 https://doi.org/10.1016/j.surfcoat.2007.11.022
  26. E. Gruzdys, S. Meskinis, S. Tamulevicius, T. Grinys : Mater. Sci. 14 (2008) pp.4
  27. T. Gomez-del Rio et al. : Influence of the deposition techniques on the mechanical properties and microstructure of NiCrBSi coatings, Journal of Materials Processing Technology 204 (2008) 304-312 https://doi.org/10.1016/j.jmatprotec.2007.11.042
  28. J. F. Flores, A. Neville, N. Kapur, A. Gnanavelu : An experimental study of the erosion-corrosion behavior of plasma transferred arc MMCs, Wear 267 (2009) 213-222 https://doi.org/10.1016/j.wear.2008.11.015
  29. Ch. Just et al. : Influence of welding current on carbide/ matrix interface properties in MMCs, Journal of Materials Processing Technology 210 (2010) 408-414 https://doi.org/10.1016/j.jmatprotec.2009.10.001
  30. Huntington Eloise Corp. Kaiser Samuel : filler metal composition and method for overlaying low NOx power boiler tubes, Korean unexamined patent 10-2009-0094435 (in Korean)
  31. Kobe Seikosyo, Ikeda deznao : Ni base alloy solid wire for welding, Korean unexamined patent 10-20120057485 (in Korean)
  32. H. Kashani et al. : Room and high temperature wear behaviors of nickel and cobalt base weld overlay coatings on hot forging dies, Wear 262 (2007) 800-806 https://doi.org/10.1016/j.wear.2006.08.028
  33. A. K. Bhaduri et al. : Selection of hardfacing material for components of the indian prototype fast breeder reactor, Journal of Nuclear Materials 334 (2004) 109-114 https://doi.org/10.1016/j.jnucmat.2004.05.005
  34. Seung-Gun Lee et al. : Analysis of Overlay Weld Effect on Preventing PWSCC in Dissimilar Metal Weld, The Korean Society of Mechanical Engineers, 34-1 (2010) 97-101 (in Korean) https://doi.org/10.3795/KSME-A.2010.34.1.97
  35. Tae-Kwang Song et al. : Effect of Preemptive Weld Overlay on Residual Stress Mitigation for Dissimilar Metal Weld of Nuclear Power Plant Pressurizer, KSME-A. 32-10 (2008) 873-881 (in Korean) https://doi.org/10.3795/KSME-A.2008.32.10.873
  36. H-Y Bae et al. : Effect of preemptive weld overlay sequence on residual stress distribution for dissimilar metal weld of Kori nuclear power plant pressurizer KSME autumn (2008) 88-93 (in Korean)
  37. Oh, Chang-Young et al. : Effect of Similar Metal Weld & Preemptive Weld Overlay On Residual Stress of Repair Weldment In Surge Nozzle, Computational Design in Engineering, 22-6 (2009) 557-564 (in Korean)
  38. Hee-Sik Lim et al. : Wear Behavior of WC-12%Co/ Low Carbon Steel Metal Matrix Composites(MMC) Welding Overlay, KWS 21-2 (2003) 172-179 (in Korean)
  39. Yong Soo Ahn et al. : Behavior of solidification cracking with dilution in PTAW Ni-base superalloys overlay, April 01, (2000) 60-63
  40. C. P. Paul et al. : Cladding of WC-12 Co on low carbon steel using a pulsed Nd:YAG laser, Materials Science and Engineering A 464 (2007) 170-176 https://doi.org/10.1016/j.msea.2007.01.132
  41. K. S. YOO et al. : The development of prevention technique for crack and porosity occurred during hardening overlay auto MIG welding for press die of gray cast iron, KWJS Autumn November (2005) 114-116 (in Korean)
  42. Jun Ki Kim et al. : Design of Erosion Resistant Overlay Welding Material, 28-3 (2010) 31-35 (in Korean) https://doi.org/10.5781/KWJS.2010.28.3.031
  43. Kown-yeong Lee et al. : The effects of additive elements on the sliding wear behavior of Fe-base hardfacing alloy, Wear, 255 (2003) 481-488 https://doi.org/10.1016/S0043-1648(03)00155-8
  44. Dong-sheng Wang et al. : Investigation on the microstructure and cracking susceptibility of laserclad V2O5/NiCrBSiC alloy coatings, Surface & Coatings Technology 202 (2008) 1371-1378 https://doi.org/10.1016/j.surfcoat.2007.06.036
  45. Byung-Il Yang et al. : Hot Cracking Behavior in Inconel 690 Overlay Welds on Mn-Ni-Cr-Mo Steel for Pressure Vessels, 20-2 (2002) 82-89
  46. M. J. Chao, E. J. Liang : Surface & Coatings Technology 179 (2004) pp.265 https://doi.org/10.1016/S0257-8972(03)00857-0
  47. K. L. wang et al. : Journal Materials Proccessing Technology 139 (2003) 448 https://doi.org/10.1016/S0924-0136(03)00551-X
  48. Ch. Just et al. : Influence of processing conditions on the carbide/matrix interface in sintered composite layers, Surface & Coatings Technology 205 (2010) 35-42 https://doi.org/10.1016/j.surfcoat.2010.05.046
  49. Kyu-Ho Han et al. : Effects of GMA Welding Conditions on the Bead Shape of Hardfacing Overlay welding, Journal of KWJS, 25-5 (2007) 514-519 (in Korean) https://doi.org/10.5781/KWJS.2007.25.5.058
  50. Girish R. Desale et al. : Erosion wear behavior of laser clad surfaces of low carbon austenitic steel, Wear 266 (2009) 975-987 https://doi.org/10.1016/j.wear.2008.12.043