DOI QR코드

DOI QR Code

기관 폐열 회수를 위한 열교환기의 Baffle 길이 변경에 따른 성능 예측에 관한 수치 해석적 연구

An Investigation on Flow and Structural Characteristics of Heat Exchanger in Rankine Steam Cycle for Co-generation System

  • 류규현 (인천대학교 기계공학부) ;
  • 김구성 (국민대학교 자동차공학 전문대학원) ;
  • 이영훈 ;
  • 강석호 (국민대학교 자동차공학 전문대학원) ;
  • 박기범 (국민대학교 자동차공학 전문대학원)
  • Ryu, Kyuhyenn (Dept. of Mechanical system Engineering, University of Incheon) ;
  • Kim, Kusung (Graduate School of Automotive Engineering, Kookmin University) ;
  • Lee, Younghum (LS MOTORS) ;
  • Kang, Seokho (Graduate School of Automotive Engineering, Kookmin University) ;
  • Park, Gibeom (Graduate School of Automotive Engineering, Kookmin University)
  • 투고 : 2013.10.11
  • 심사 : 2013.11.25
  • 발행 : 2013.12.25

초록

A 2-loop waste heat recovery system with Rankine steam cycles for the improvement of fuel efficiency of gasoline vehicles has been investigated. A high temperature loop is used to recover waste heat from exhaust gas and a low temperature loop is used to recover waste heat from cold engine coolant. This paper has dealt with a layout of low temperature loop system, the review of the velocity contours through numerical analysis. According to the result of analysis, the designed heat exchanger. And comparing with flow analysis results, LT Boiler is safe to operation.

키워드

참고문헌

  1. H. S. Heo and S. J. Bae, 2010, "Technology Trends of Rankine Steam Cycle for Engine Waste Heat Recovery", Auto Journal of KSAE, Vol. 32, No. 5, pp. 23-32.
  2. H. S. Heo, S. J. Bae, J. S. Hwang, H. K. Lee, D. H. Lee, J. S. Park and H. Y. Lee, 2011, "Performance Design of Boiler for Waste Heat Recovery of Engine Coolant by Rankine Steam Cycle", KSAE, Vol. 19, No. 5, pp. 58-66.
  3. J. Ringler, M. Seifert, V. Guyotot and W. Hubner., 2009, "Rankine Cycle for Waste Heat Recovery of IC Engines", SAE 2009-01-0174.
  4. S. J. Bae, H. S. .0Heo, H. K. Lee, Y. D. Choung, J. S. Hwang and C. B. Lee, 2009, "An Investigation on Working Fluids for an Exhaust Waste Heat Recovery System of a Gasoline Engine", Annual Conference of KSAE, pp. 151-158.
  5. Hinze, J. O., 1975, "Turbulence", McGraw-Hill Publishing Co., New York.
  6. Hong, K. D., 1992, "Stability Improvement of Center Lathes", J. of KSPE, Vo1. 2, No. 2, pp. 123-126, 1992.