References
- Maeda, O., Cao, Y. and Altintas Y., 2005, "Expert Spindle Design System," International Journal of Machine Tools & Manufacture, Vol. 45, pp. 537-548. https://doi.org/10.1016/j.ijmachtools.2004.08.021
- Lin, C. W. and Tu, J. F., 2007, "Model-Based Design of Motorized Spindle Systems to Improve Dynamic Performance at High Speeds," Journal of Manufacturing Processes, Vol. 7, No. 2, pp. 94-108.
- Abele, E., Altintas, Y. and Brecher, C., 2010, "Machine Tool Spindle Units," CIRP Annals- Manufacturing Technology, Vol. 59, pp. 781-802. https://doi.org/10.1016/j.cirp.2010.05.002
- Jedrzejewski, J., Kowal, Z., Kwasny, W. and Modrzycki, M., 2005, "High-Speed Precise Machine Tools Spindle Units Improving," Journal of Materials Processing Technology, Vol. 162-163, pp. 615-621. https://doi.org/10.1016/j.jmatprotec.2005.02.149
- Kim, D. H. and Lee, C. M., 2010, "A Study on the Thermal Stabilization Design of a New Concept Compact Machining center," Journal of the KSPE, Vol. 27, No. 12, pp. 119-124.
- Kim, D. H. and Lee, C. M., 2011, "The Static and Dynamic Analysis of a 45,000rpm Spindle for a Machine Tool and Evaluation of Its Stiffness," Journal of the KSPE, Vol. 28, No. 4, pp. 422-426.
- Hwang, Y. K. and Lee, C. M., 2009, "A Study on the Determination of Shaft Size Using the Extreme Vertices Design," Trans. of the KSMTE, Vol. 18, No. 2, pp. 214-220.
- Park, S. J., Kim, D. H. and Lee, C. M., 2012, "A Study Determining the Optimal Machining Conditions for a 40,000rpm Ultra High Speed Spindle System," Precision Engineering, Vol. 36, pp. 451-457. https://doi.org/10.1016/j.precisioneng.2012.02.003
- Shin, J. H. and Lee, C. M., "A Study on Spindle Shape Design Using Design of Experiments," Journal of the KSPE, Vol. 26, No. 4, pp. 120-127.
- Lim, J. S., Chung, W. J. and Lee, C. M., 2009, "Selection of Bearing Position for Improving Static and dynamic stiffness of 40,000rpm SHgh-Speed Spindle," Journal of the KSMPE, Vol. 8, No. 1, pp. 10-17.
- Melkote, S., Kumar, M., Hashimoto, F. and Lahoti, G., 2009, "Laser Assisted Micro-Milling of Hard-to- Machine Materials," CIRP Annals-Manufacturing Technology, Vol. 58, No. 1, pp. 45-48. https://doi.org/10.1016/j.cirp.2009.03.053
- Kim, K. S., Kim, J. H., Choi, J. Y. and Lee, C. M., 2011, "A Review on Research and Development of Laser Assisted Turning," International Journal of Precision Engineering and Manufacturing, Vol.12, No.4, pp. 753-759. https://doi.org/10.1007/s12541-011-0100-1
- Baek, S. H., Cho, S. S., Shin, S. G. and Joo, W. S., 2006, "Size Effect on the Modulus of Rupture in Automotive Ceramic Molithic Substrate Using Optimization and Response Surface Method," Trans. Korean Soc. Mech. Eng. A, Vol. 30, No. 11, pp. 1392-1400. https://doi.org/10.3795/KSME-A.2006.30.11.1392
- Lim, P. and Yang, G. E., 2007, "Optimization of Finish Cutting Condition of Impeller with Five-Axis Machine by Response Surface Method," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 9, pp. 924-933. https://doi.org/10.3795/KSME-A.2007.31.9.924
- Derringer, G. C. and Suich, R., 1980, "Simultaneous Optimization of Several Response Variables," Journal of Quality Technology, Vol. 12, pp. 214-219 https://doi.org/10.1080/00224065.1980.11980968
Cited by
- A Study on the Analysis of 20,000rpm Heavy-Cutting Spindle for Precision Machining vol.32, pp.1, 2015, https://doi.org/10.7736/KSPE.2015.32.1.57