DOI QR코드

DOI QR Code

Computational study of a small scale vertical axis wind turbine (VAWT): comparative performance of various turbulence models

  • Aresti, Lazaros (School of Engineering and Technology, University of Hertfordshire, Collage Lane Campus) ;
  • Tutar, Mustafa (Mechanical and Manufacturing Department, MGEP, Mondragon Goi Eskola Politeknikoa) ;
  • Chen, Yong (School of Engineering and Technology, University of Hertfordshire, Collage Lane Campus) ;
  • Calay, Rajnish K. (Narvik University College)
  • 투고 : 2012.11.16
  • 심사 : 2013.07.30
  • 발행 : 2013.12.25

초록

The paper presents a numerical approach to study of fluid flow characteristics and to predict performance of wind turbines. The numerical model is based on Finite-volume method (FVM) discretization of unsteady Reynolds-averaged Navier-Stokes (URANS) equations. The movement of turbine blades is modeled using moving mesh technique. The turbulence is modeled using commonly used turbulence models: Renormalization Group (RNG) k-${\varepsilon}$ turbulence model and the standard k-${\varepsilon}$ and k-${\omega}$ turbulence models. The model is validated with the experimental data over a large range of tip-speed to wind ratio (TSR) and blade pitch angles. In order to demonstrate the use of numerical method as a tool for designing wind turbines, two dimensional (2-D) and three-dimensional (3-D) simulations are carried out to study the flow through a small scale Darrieus type H-rotor Vertical Axis Wind Turbine (VAWT). The flows predictions are used to determine the performance of the turbine. The turbine consists of 3-symmetrical NACA0022 blades. A number of simulations are performed for a range of approaching angles and wind speeds. This numerical study highlights the concerns with the self-starting capabilities of the present VAWT turbine. However results also indicate that self-starting capabilities of the turbine can be increased when the mounted angle of attack of the blades is increased. The 2-D simulations using the presented model can successfully be used at preliminary stage of turbine design to compare performance of the turbine for different design and operating parameters, whereas 3-D studies are preferred for the final design.

키워드

참고문헌

  1. Ansys (2009), Fluent theory guide, V.l3., Ansys Inc.
  2. Bakker, A., LaRoche, R.D., Wang, M.H. and Calabrese, R.V. (2000), Sliding mesh simulation of laminar flow in stirred reactors, The Online CFM Book.
  3. Beri, H. and Yao, Y. (2011), "Effect of camber airfoil on self starting of vertical axis wind turbine", Environ. Sci. Technol., 4(3), 302-312. https://doi.org/10.3923/jest.2011.302.312
  4. Betz, A. (1920), "Das maximum der theoretisch moglichen Ausnutzung des windes durch windmotoren", Zeitschrift fur das gesamte Turbinenwesen, 307-309.
  5. Castelli, M.R., Allesandro, E. and Ernesto, B. ( 2011), "The darrieus wind turbine: proposal for a new performance prediction model based on CFD", Energy, 36, 4919-4934. https://doi.org/10.1016/j.energy.2011.05.036
  6. Drees, H. (1978), "The cycloturbine and its potential for broad applications", Proceedings of the 2nd International Symposium on Wind Energy Systems, Amsterdam.
  7. El-Samanoudy, M., Ghorab, A. and Youssef, S. (2010), "Effect of some design parameters on the performance of a Giromill vertical axis wind turbine", Ain Shams Eng. J., 1, 85-95. https://doi.org/10.1016/j.asej.2010.09.012
  8. Grylls, W., Dale, B. and Sarre, P. (1978), "A Theoretical and experimental investigation into the variable pitch vertical axis wind turbine", Proceedings of the 2nd International Symposium on Wind Energy Systems, Amsterdam.
  9. Hau, E. (2006), Wind turbines- fundamentals, technologies, applocations, economics, 2nd Ed., Berlin Hetdelberg, Springer.
  10. Hinze, O. (1975), Turbulence, New York, McGraw-Hill Publishing Co.
  11. Howell, R., Qin, N., Edwards, J. and Durrani, N. (2010), "Wind tunnel and numerical study of a small vertical axis wind turbine", Renew. Energ., 35, 412-422. https://doi.org/10.1016/j.renene.2009.07.025
  12. Hwang, I., Jeong, I., Lee, Y. and Kim, S. (2006), "Aerodynamic analysis and rotor control of a new vertical axis wind turbine by individual blade control method", Proceedings of the 17th International Conference on Adaptive, Taiwan, Oct. 16-19.
  13. Hwang, I.S., Ming, S.Y., Jeong, I.J., Lee, Y.H. and Kim S.J. (2006), "Efficiency improvement of cycloidal wind turbine by active control of the blade motion", Proceedings of the 16th International Conference on Adaptive Structures and Technologies, Paris, France, Oct. 9-15.
  14. Issa, R. (1986), "Solution of the implicitly discretized fluid-flow equations by operator-splitting", J. Comput Phys, 62, 40-65. https://doi.org/10.1016/0021-9991(86)90099-9
  15. Jiangtao, L., Jingjing, L., Gang, C. and Yueming, L. (2012), "Numerical simulation method for unsteady aerodynamics of high speed trains", Int. J. Aerospace Lightweight Struct., 1(2).
  16. Kirke, B. and Lazauskas, L. (1991), "Enhacing the performance of vertical axis wind turbine using a simple variable pitch system", Wind Eng., 15, 187-195.
  17. Mazharul, I., David, S., Ting, K. and Fartaj, A. (2008), "Aerodynamic models for Darrieus-type straight bladed vertical axis wind turbines", Renewable and Sustainable Energy Reviews, 12, 1087-1109. https://doi.org/10.1016/j.rser.2006.10.023
  18. Clarck, R.N. (1991), "Design and initial performance of a 500 KW vertical axis wind turbine", Transaction ASAE, 34(3), 985-991. https://doi.org/10.13031/2013.31760
  19. Savonious, S. (1931), "The S-rotor and its application", Mech. Eng., 53(5), 333-338.
  20. Scott, J. (2001), NACA Airfoil Series. [Online] Available at: http://www.aerospaceweb.org/question/airfoils/q0041.shtml [Accessed 16 October 2010].
  21. Spera, D.A. (1994), Wind turbine technology, New York: ASME Press.
  22. Tutar, M. and Holdo A.E. (2001), "Computational modelling of flow around a circular cylinder in sub-critical flow regime with various turbulence models", Int. J. Numer. Meth. Fl., 35(7), 763-784. https://doi.org/10.1002/1097-0363(20010415)35:7<763::AID-FLD112>3.0.CO;2-S
  23. Varol, C.A. (2001), "Increasing the efficiency of wind turbine", Wind Eng. Ind. Aerod., 89, 809-815. https://doi.org/10.1016/S0167-6105(01)00069-1
  24. Yao, J., Wang, W., Yuan, W., Wang, H. and Cao, L. (2012), "Analysis of the influence of turbulence model changes to aerodynamic performance of vertical axis wind turbine", Procedia Eng., 31, 274-281. https://doi.org/10.1016/j.proeng.2012.01.1024
  25. Wilcox, D. (1998), Turbulence modeling for CFD, California: DCW Industries, Inc., La Canada.

피인용 문헌

  1. Aero-elastic coupled numerical analysis of small wind turbine-generator modelling vol.23, pp.6, 2016, https://doi.org/10.12989/was.2016.23.6.577
  2. Numerical simulation for unsteady flow over marine current turbine rotors vol.23, pp.4, 2016, https://doi.org/10.12989/was.2016.23.4.301
  3. Numerical and experimental studies of a small vertical-axis wind turbine with variable-pitch straight blades vol.10, pp.1, 2015, https://doi.org/10.1299/jfst.2015jfst0001
  4. Numerical and experimental analysis of a 3D printed Savonius rotor with built-in extension plate vol.27, pp.1, 2018, https://doi.org/10.12989/was.2018.27.1.001
  5. Enhancing aerodynamic performance of NACA 4412 aircraft wing using leading edge modification vol.29, pp.4, 2019, https://doi.org/10.12989/was.2019.29.4.271
  6. Aerodynamic design optimization of an aircraft wing for drag reduction using computational fluid dynamics approach vol.31, pp.1, 2020, https://doi.org/10.12989/was.2020.31.1.15