References
- O.K. Chopra and W.J. Shack, "Effect of LWR Coolant Environments on the Fatigue Life of Reactor Materials," NUREG/CR-6909, Argon National Laboratory, USA (2006).
-
M. Higuchi, K. Sakaguchi, Y. Nomura, and A. Hirano, "Final Proposal of Environmental Fatigue Life Correction Factor (
$F_{en}$ ) for Structural Materials in LWR Water Environment.", Proc. of Pressure Vessel and Piping (PVP2007), San Antonio, Texas, USA, July 22 - 26, 2007. - ASME, ASME Boiler and Pressure Vessel Code III Division 1, The American Society of Mechanical Engineers (1989).
- O.K. Chopra, "Effect of LWR Coolant Environments on Fatigue Design Curves of Austenitic Stainless Steels," NUREG/CR-5704, Argon National Laboratory, USA (1999).
- US NRC, 2007, Regulatory Guide 1.207, March.
- C. Jang and I.S. Jeong, "Lifetime Evaluation and Aging Management Program for Kori Unit 1 Reactor Pressure Vessel," TM.97NJ26.P2001.306, KEPRI, Korea (2001)
-
H. Jang, J.H. Kim, C. Jang, J.G. Lee, and T.S. Kim, "Low-Cycle Fatigue Behaviors of Two Heats of SA508 Gr.1a Low Alloy Steel in
$310\;^{\circ}C$ Air and Deoxygenated Water-Effects of Dynamic Strain Aging and Microstructures," Mater. Sci. and Eng. A, 580, 41(2013) https://doi.org/10.1016/j.msea.2013.05.049 -
H. Jang, H. Cho, C. Jang, T.S. Kim, and C.K. Moon, "Effect of Cyclic Strain Rate and Sulfides on Environmentally Assisted Cracking Behaviors of SA508 Gr.1a Low Alloy Steel in Deoxygenated Water at
$310\;^{\circ}C$ ," Nucl. Eng. and Technol., 40, 225 (2008). https://doi.org/10.5516/NET.2008.40.3.225 - S.P. Lynch, "Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions," Proc. Int. Conf. Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, Jackson Lake Lodge, Moran, Wyoming, USA, Sep. 22-26, 2002.
- H.K. Birnbaum, and P. Sofronis, "Hydrogen-Enhanced Localized Plasticity - A Mechanism for Hydrogen-Related Fracture," Mater. Sci. and Eng. A, 176, 191 (1994). https://doi.org/10.1016/0921-5093(94)90975-X
- P. Rodriguez, "Serrated Plastic Flow," Bull. Mater. Sci., 6 653 (1984). https://doi.org/10.1007/BF02743993
- S.L. Mannan, "Role of Dynamic Strain Aging in Low Cycle Fatigue," Bulletin of Materials Science, 16, 561 (1993). https://doi.org/10.1007/BF02757656
- R.V. Miner, and M.G. Castelli, "Hardening Mechanisms in a Dynamic Strain Aging Alloy HASTELLOY X during Isothermal and Thermomechanical Cyclic Deformation," Metall. Trans. A, 23A, 551 (1992).
- X. Wu, Y. Katada, S.G. Lee, and I.S. Kim, "Hydrogen-Involved Tensile and Cyclic Deformation Behavior of Low Alloy Pressure Vessel Steel," Metall. Mater. Trans. A, 35A, 1477 (2004).
-
S.G. Lee, and I.S. Kim, "Effect of Pre-Charged Hydrogen on Fatigue Crack Growth of Low Alloy Steel at
$288\;^{\circ}C$ ," Mater. Sci. and Eng. A, 420, 279 (2006). https://doi.org/10.1016/j.msea.2006.01.080 - M. Weisse, C.K. Wanmukwamba, H.J. Christ, and H. Mughrabi, "The Cyclic Deformation and Fatigue Behavior of the Low Carbon Steel SAE 1045 in the Temperature Regime of Dynamic Strain Ageing," Acta Metall. Mater., 41, 2227 (1993). https://doi.org/10.1016/0956-7151(93)90392-6
- K. Tsuzaki, Y. Matsuzaki, T. Maki, and T. Tamura, "Fatigue Deformation Accompanying Dynamic Strain Aging in a Pearlitic Eutectoid Steel," Mater. Sci. and Eng. A, 142, 63 (1991). https://doi.org/10.1016/0921-5093(91)90754-B
- S.R. Mediratta, V. Ramaswamy, and P.R. Rao, "Influence of Ferrite-Martensite Microstructural Morphology on the Low Cycle Fatigue of a Dual-Phase Steel," Int. J. of Fatigue, 7, 107 (1985). https://doi.org/10.1016/0142-1123(85)90041-6
-
H. Cho, B.K. Kim, I.S. Kim, C. Jang, and D.Y. Jung, "Fatigue Life and Crack Growth Mechanisms of the Type 316LN Austenitic Stainless Steel in
$310\;^{\circ}C$ Deoxygenated Water," J. of Nucl. Sci. and Technol., 44, 1007 (2007). https://doi.org/10.1080/18811248.2007.9711340 -
H. Cho, B.K. Kim, I.S. Kim, and C. Jang, "Low Cycle Fatigue Behaviors of Type 316LN Austenitic Stainless Steel in
$310\;^{\circ}C$ Deaerated Water - Fatigue Life and Dislocation Structure Development", Mater. Sci. and Eng. A, 476, 248 (2008). https://doi.org/10.1016/j.msea.2007.07.023 - K. Tsutsumi, H. Kanasaki, T. Umakoshi, T. Nakamura, S. Urata, H. Mizuta, and S. Nomoto, "Fatigue Life Reduction in PWR Water Environment for Stainless Steels", ASME PVP 410-2, 23 (2000).
-
H. Jang, P. Cho, C. Jang, and T.S. Kim, "Environmental Fatigue Behaviors of CF8M Stainless Steel in
$310\;^{\circ}C$ Deoxygenated Water - Effect of Hydrogen and Microstructure", Accepted Trans. Korean Soc. Mech. Eng. A, (2013). -
M. Gerland, R. Alain, B. Ait Saadi, and J. Mendez, "Low Cycle Fatigue Behavior in Vacuum of a 316L-type Austenitic Stainless Steel between 20 and
$600\;^{\circ}C$ - Part II: Dislocation Structure Evolution and Correlation with Cyclic Behavior," Mater. Sci. & Eng. A, 229, 68 (1997). https://doi.org/10.1016/S0921-5093(96)10560-8 - W.A. Van Der Sluys, B.A. Young, and D. Doyle, "Corrosion Fatigue Properties on Alloy 690 and Some Nickel-Based Weld Metals", Assessment Methodologies for Preventing Failure: Service Experience and Environmental Considerations, PVP Vol. 410-2, pp. 85-91, ASME(2000).
- J-D Hong, P Cho, T. S. Kim, Y. S. Lee, C. Jang, "Low cycle fatigue of Alloy 690 and welds in a simulated PWR primary water environment", 2013 Korean Nuclear Society Spring Meeting, Gwangju, Korea, May 30-31,2013.
Cited by
- Low cycle fatigue behavior of hot-bent 347 stainless steel in a simulated PWR water environment vol.30, pp.11, 2016, https://doi.org/10.1007/s12206-016-1012-x
- Effect of Deformation Temperature on the Microstructure and Mechanical Properties of High-Strength Low-Alloy Steel During Hot Compression vol.27, pp.8, 2018, https://doi.org/10.1007/s11665-018-3510-8
- Corrosion Fatigue Crack Growth of Forged Type 316NG Austenitic Stainless Steel in 325°C Water vol.74, pp.4, 2018, https://doi.org/10.5006/2647