DOI QR코드

DOI QR Code

The Effect of Ball-Milling of Elemental Powders on Ni-Al Based Intermetallic Coatings using the Heat of Molten Cast Iron

주철의 용탕열을 이용한 Ni-Al계 금속간화합물의 연소합성 코팅에 미치는 Ball Milling의 영향

  • Lee, Han-Young (Keimyung University, Dept. Advanced Materials Eng.) ;
  • Cho, Yong-Jae (Keimyung University, Dept. Advanced Materials Eng.) ;
  • Kim, Tae-Jun (Keimyung University, Dept. Advanced Materials Eng.) ;
  • Bang, Hee-Jang (Korea Institute of Industrial Technology, Foundry Technology Service Center)
  • 이한영 (계명대학교 신소재공학과) ;
  • 조용재 (계명대학교 신소재공학과) ;
  • 김태준 (계명대학교 신소재공학과) ;
  • 방희장 (한국생산기술연구원 주조기술지원센터)
  • Received : 2011.07.18
  • Published : 2012.01.25

Abstract

Ball-milled Ni-Al powder compacts have been synthesized by the heat of molten cast iron and have been coated on cast iron. The effects of the ball-milling time on the microstructure of the intermetallic coatings have been investigated. The experimental results showed that the ball-milled Ni-Al powder compacts were completely reacted and were successfully coated on the cast iron without re-melting the substrate. Densification of the coating layers was enhanced by increasing the ball-milling time. This might be attributed to the fact that the heat released during the intermetallic reaction was dispersed over a prolonged reaction time by the ball-milling of the elemental powders.

Keywords

References

  1. Mater. Sci. Soc. Jpn, Intermetallic compound for materials, 88, Shokabo, Tokyo. Japan (1995).
  2. K. Morsi, Mater. Sci & Eng. A 299, 1 (2001).
  3. H.-Y. Lee, J.-K. Roe, and A. Ikenaga, Wear 260, 83 (2006).
  4. A. Okamoto, A. Ikenaga, T. Yoshimoto, Y. Hiropse, and H.-Y. Lee, J. of JFS 77, 744 (2005).
  5. T. Kimata, K. Uenishi, A. Ikenaga, and K. F. Kobayashi, Intermetallics, 11, 947 (2003).
  6. H.-Y. Lee, T.-J. Kim, and Y.-J. Cho, Kor. J. Met. Mater. 48, 141 (2010).
  7. H.-Y. Lee and Y.-J. Cho, J. of KFS 31, 83 (2011).
  8. H.-Y. Lee, J. of the KSTLE 27, 1 (2011).
  9. Z. Zhan, Y. He, D. Wang, and W. Gao, Intermetallics 14, 75 (2006).
  10. N.J. Welham, Intermetallics 6, 363 (1998).