DOI QR코드

DOI QR Code

MPPT Control of Photovoltaic System using HBPI Controller

HBPI 제어기를 이용한 태양광발전 시스템의 MPPT 제어

  • Ko, Jae Sub (Dept. of Electric Control Engineering, Sunchon National Univ.) ;
  • Chung, Dong-Hwa (Dept. of Electric Control Engineering, Sunchon National Univ.)
  • 고재섭 (순천대학교 전기제어공학과) ;
  • 정동화 (순천대학교 전기제어공학과)
  • Received : 2012.08.29
  • Accepted : 2012.10.25
  • Published : 2012.12.01

Abstract

This paper proposes the hybrid proportional integral(HBPI) controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional constant voltage(CV), perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, in order to solve these problems, this paper proposes HBPI controller that is adjusted gain of conventional PI control using fuzzy control, and the maximum power point tracks using this controller. The validity of the controller proposed in this paper proves through the results of the comparisons.

Keywords

References

  1. J. K. Lee, Y. D. Kim, S. Y. Yoon, "Renewable Energy System Design", Hongrung publishing company, 2006.
  2. H. C. Kang, "CEO Information(No. 616)", SERI, 2007.
  3. K. J. You, "Global Environment and Photovoltaic Industry", Physics & High Technology, 2006.
  4. Z. Ye, X. Wu, "Compensation Loop Design of a Photovoltaic System Based on Constant Voltage MPPT", Power and Energy Engineering Conference, pp. 1-4, 2009
  5. J. S. Choi, D. H. Chung, "MPPT Control of Photovoltaic Generation Using MLPO Method", Trans. KIEE, vol. 60, no. 11, pp. 2064-2075, 2011
  6. A. Safari, S. Mekhilef, "Incremental conductance MPPT method for PV system", 2011 24th Canadian Conference on Electrical and Computer Engineering, pp. 345-347, 2011.
  7. N. Femia, G. Petron, G. Spagnuolo, and M. Vitelli, "Optimization of perturb and observe maximum power point tracking method," IEEE Trans. Power Electron., Vol. 20, no. 4, pp. 963-973, Jul. 2005. https://doi.org/10.1109/TPEL.2005.850975
  8. J. A. Abu-Qahouq, H. Mao, H. J. Al-Atrash, and I. Batarseh, "Maximum efficiency point tracking (MEPT) method and digital dead time control implementation," IEEE Trans. Power Electron., Vol. 21, no. 5, pp. 1273-1281, Sep. 2006. https://doi.org/10.1109/TPEL.2006.880244
  9. R. Kiranmayi, K. Vijaya Kumar Reddy and M. Vijaya Kumar "Modeling and a MPPT method for solar cells" J. Eng. Applied Sci., 3(1) pp. 128-133, 2008.
  10. Y. J. Wang, P. C. Hsu, "Analytical modelling of partial shading and different orientation of photovoltaic modules", The Institution of Engineering and Technology, vol. 4, Iss, 3, pp. 272-282, 2009.

Cited by

  1. A Novel MPPT Control of a Photovoltaic System using an FLC Algorithm vol.28, pp.11, 2014, https://doi.org/10.5207/JIEIE.2014.28.11.017