Journal of Power Electronics

  • 제12권6호
  • /
  • Pages.895-903
  • /
  • 2012
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Fast Switching Direct Torque Control Using a Single DC-link Current Sensor

  • Wang, Wei (School of Electrical Engineering, Southeast University) ;
  • Cheng, Ming (School of Electrical Engineering, Southeast University) ;
  • Wang, Zheng (School of Electrical Engineering, Southeast University) ;
  • Zhang, Bangfu (School of Electrical Engineering, Southeast University)
  • 투고 : 2012.03.21
  • 발행 : 2012.11.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a fast switching direct torque control (FS-DTC) using only a single DC-link current sensor. In FS-DTC, six new active voltage complex space vectors (CSVs) are synthesized by the conventional active voltage space vectors (SVs). The corresponding sectors are rotated in the anticlockwise direction by 30 degrees. A selection table is defined to select the CSVs. Based on the "Different Phase Mode", the output sequence of the selected CSV is optimized. Accordingly, a reconstruction method is proposed to acquire the phase currents. The core of the FS-DTC is that all of the three phase currents can be reliably reconstructed during every two sampling periods, which is the result of the fast switching between different phases. The errors between the reconstructed and actual currents are strictly limited in one sampling period. The FS-DTC has the advantages of the standard DTC scheme such as simple structure, quick torque response and robustness. As can be seen in the analysis, the FS-DTC can be thought of as an equivalent standard DTC scheme with 86.6% of the maximum speed, 173.2% of the torque ripple, and 115% of the response time of the torque. Based on a dSPACE DS1103 controller, the FS-DTC is implemented in an induction machine drive system. The results verify the effectiveness of the FS-DTC.

키워드

참고문헌

  1. I. Takahashi and T. Noguchi, "A new quick-response and high-efficiency control strategy of an induction motor," IEEE Trans. Ind. Appl., Vol. IA-22, No. 5, pp. 820-827, Sep./Oct. 1986. https://doi.org/10.1109/TIA.1986.4504799
  2. M. Depenbrock, "Direct self-control (DSC) of inverter-fed induction machine," IEEE Trans. Power Electron., Vol. 3, No. 4, pp. 420-429, Oct. 1988. https://doi.org/10.1109/63.17963
  3. Y. Zhang, J. G. Zhu, W. Xu, and Y. Guo, "A simple method to reduce torque ripple in direct torque controlled permanent magnet synchronous motor by using vectors with variable amplitude and angle," IEEE Trans. Ind. Electron., Vol. 58, No. 7, pp. 2848-2859, Jul. 2011. https://doi.org/10.1109/TIE.2010.2076413
  4. W. Wang, M. Cheng, W. Hua, W. Zhao, S. Ding, and Y. Zhu, "An improved stator flux observation strategy for direct torque controlled induction machine drive system," in Proc. ICEMS, pp. 863-867, 2010.
  5. W. Wang, M. Cheng, W. Hua, W. Zhao, S. Ding, and Y. Zhu, "Hybrid modeling and applications of virtual metro systems," in Proc. VPPC, pp. 1-5, 2010.
  6. A. Ghaderi, T. Umeno, Y. Amano, and S. Masaru, "A novel seamless direct torque control for electric drive vehicles," Journal of Power Electronics, Vol. 11, No. 4, pp. 449-455, Jul. 2011. https://doi.org/10.6113/JPE.2011.11.4.449
  7. D. H. Lee, T. H. Kim, and J. W. Ahn, "A hydraulic-oil pump system using sr drive with a direct torque control scheme," Journal of Power Electronics, Vol. 9, No. 3, pp. 491-498, May 2009
  8. L. B. Zheng, J. E. Fletcher, B. W. Williams, and X. N. He, "A novel direct torque control scheme for a sensorless five-phase induction motor drive," IEEE Trans. Ind. Electron., Vol. 58, No. 2, pp. 503-513, Feb. 2011. https://doi.org/10.1109/TIE.2010.2047830
  9. Y. C. Zhang and J. G. Zhu, "Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency," IEEE Trans. Power Electron., Vol. 26, No. 1, pp. 235-248, Jan. 2011. https://doi.org/10.1109/TPEL.2010.2059047
  10. S. Morimoto, M. Sanada, and Y. Takeda, "High-performance current-sensorless drive for PMSM and SynRM with only low-resolution position sensor," IEEE Trans. Ind. Appl., Vol. 39, No. 3, pp. 792-801, May/Jun. 2003. https://doi.org/10.1109/TIA.2003.811782
  11. A. Consoli, G. Scarcella, and A. Testa, "Speed and current sensorless field oriented induction motor drive operating at low stator frequencies," in Proc. IAS, pp. 1679-1686, 2002.
  12. G. Barba, L. Glielmo, V. Perna, and F. Vasca, "Current sensorless induction motor observer and control for hybrid electric vehicles," in Proc. PESC, pp. 1224-1229, 2001.
  13. Y. Cho, T. LaBella, and J. Lai, "A three-phase current reconstruction strategy with online current offset compensation using a single current sensor," IEEE Trans. Ind. Electron., Vol. 59, No. 7, pp. 2924-2933, Oct. 2011.
  14. W. Jiang and B. Fahimi, "Current reconstruction techniques for survivable three-phase pwm converters," IEEE Trans. Power Electron., Vol. 25, No. 1, pp. 188-192, Jan. 2010. https://doi.org/10.1109/TPEL.2009.2026046
  15. J. I. Ha, "Current prediction in vector-controlled PWM inverters using single DC-link current sensor," IEEE Trans. Ind. Electron., Vol. 57, No. 2, pp. 716-726, Feb. 2010. https://doi.org/10.1109/TIE.2009.2028361
  16. Y. K. Gu, F. L. Ni, D. P Yang, and H. Liu, "Switching state phase shift method for three-phase current reconstruction with a single DC-link current sensor," IEEE Trans. Ind. Electron., Vol. 58, No. 11, pp. 5186-5194, Nov. 2011. https://doi.org/10.1109/TIE.2011.2123854
  17. M. Bertoluzzo, G. Buja, and R. Menis, "Direct torque control of an induction motor using a single current sensor," IEEE Trans. Ind. Electron., Vol. 53, No. 3, pp. 778-784, Jun. 2006. https://doi.org/10.1109/TIE.2006.874415
  18. T. G. Habetler and D. M. Divan, "Control strategies for direct torque control using discrete pulse modulation," IEEE Trans. Ind. Appl., Vol. 27, No. 5, pp. 893-901, Sep./Oct. 1991. https://doi.org/10.1109/28.90344

피인용 문헌

  1. A DTC-PWM Control Scheme of PMSM using an Approximated Voltage Function of Voltage Vector vol.20, pp.5, 2015, https://doi.org/10.6113/TKPE.2015.20.5.421
  2. Dynamic Performance Analysis for Different Vector-Controlled CSI- Fed Induction Motor Drives vol.14, pp.5, 2014, https://doi.org/10.6113/JPE.2014.14.5.989
  3. Review of recent advancements of direct torque control in induction motor drives – a decade of progress vol.11, pp.1, 2018, https://doi.org/10.1049/iet-pel.2017.0252