DOI QR코드

DOI QR Code

A Study on the mold attachment for process automation with hot open die forging

열간 자유단조 공정 자동화를 위한 금형 어태치먼트에 관한 연구

  • Kim, C.P. (Young Jin Forging Co., LTD.) ;
  • Jeong, H.M. (Department of Energy and Mechanical Engineering, Gyeongsang National University.Institute of Marine Industry) ;
  • Chung, H.S. (Department of Energy and Mechanical Engineering, Gyeongsang National University.Institute of Marine Industry) ;
  • Ji, M.K. (Young Jin Forging Co., LTD.)
  • 김철표 (영진단조(주) 기술개발부) ;
  • 정효민 (경상대학교 에너지기계공학과.해양산업연구소) ;
  • 정한식 (경상대학교 에너지기계공학과.해양산업연구소) ;
  • 지명국 (영진단조(주) 기술개발부)
  • Received : 2012.02.09
  • Accepted : 2012.08.27
  • Published : 2012.10.31

Abstract

In mechanical industries, forging is one of the basic process. But comparing the other developed industries, forging industries can not reach at the level of that development. In forging industries, the quality of the products totally depends on the skills of workers and also the precision of the equipments. Particularly because the open die forging industry is unable to deviate from the past method of production and all works are manually progressed, the operator is always exposed to the danger. In the regard some additional device has been made especially. Thus, in this research, by using the forklift as the means for the manipulation of the development object system, it tries to be comprised the process automation. After than it is fitted with the forklift for safe and easy handling of jobs and products during open die forging process. First of all, development system mold has been assembled to the system, after than it is assembled with forklift. This development system has been applied for handling of large scale products more than 300kg, and the satisfactory result with uniform quality of the products have been achieved due to this mechanical setup.

Keywords

References

  1. H. S. An, Y. J. Cho, Y. H. Choi and D. W. Lee, 2011, "Development of manufacturing technique of multi-tasking machine tools for large scale marine engine crankshaft", Proceeding of the KSMTE (Spring), pp. 288-289.
  2. Y. C. Kwon, J. H. Lee, S. W. Lee, Y. S. Jung, N. S. Kim and Y. S. Lee, 2007, "A study on Cavity Closure Behavior During Hot Open Die Forging Process", Trans of the Materials Processing, Vol. 16, No. 4, pp. 293-298. https://doi.org/10.5228/KSPP.2007.16.4.293
  3. Y. C. Park et al., 2007, "Multi-level design preform shape optimization of ship connecting rod considering production process", Proceeding of the KSPE (Spring), pp. 527-528.
  4. D. Y. Kim et al., 2003, "A Study on the Open Die Forging Preform Shape of Crank Throw for Large Ship Engines", Proceeding of the KSTP (Spring), pp. 191-194.
  5. J. Y. Kim and C. Kim, 2010, "Analysis of Filling and Stresses in the Hot Forging Process Depending on Flange Die Shapes", Trans of the KSME(B), Vol. 34, No. 4, pp. 423-430. https://doi.org/10.3795/KSME-A.2010.34.4.423
  6. B. H. Cho et al., 1995, "Forging Manipulator Development", Korea Institute of Machinery & Materials.

Cited by

  1. Improvement of Manufacturing Process of Sublimation Transfer Printing by Applying Conveyor System and Hot Plate Pressing vol.15, pp.6, 2012, https://doi.org/10.17958/ksmt.15.6.201312.1033