References
- B. S. Kim, Y. J. Lee, and C. J. Koh, 1996, "Performance characteristics of CNG vehicle at various compression ratio", Energy Engg. Vol. 5, No. 1, pp. 42-49.
- S. S. Chung et al., 2007, "Comparison of the combustion characteristics between S.I. engine and R.I. engine", International Journal of Automotive Technology. Vol. 8, No. 1, pp. 19-25.
- S. S. Chung, J. K. Yeom and J. S. Park, 2008, "Scavenging a sub-chamber type CNG fueled engine", International Journal of Automotive Technology. Vol. 9, No. 2, pp. 123-128. https://doi.org/10.1007/s12239-008-0016-7
- Y. Dong et al., 2006, "Investigation on combustion characteristics of RI-CNG Engine", Proceeding of KSAE Spring. Vol. 3, pp. 1929-1935.
- Y. Goto, Y. Sato, 2001, "Combustion improvement and exhaust emissions characteristics in a direct injection natural gas Engine by throttling and EGR", JSME. Vol. 7, No. 659, pp. 228-233.
- J. H. Kang et al., 2005, "A Study on the effect of the fuel supply condition on combustion in a DI CNG engine", 13th International Pacific Conference on Automotive Engineering (IPC-13), Korea.
- Y. Lee et al., 1999, "Development of conversion technology of small van to high efficiency CNG sole vehicle", KIER-991404.
- M. J. Lee et al., 2004, "A study on the rapid bulk combustion of premixture using the radical seeding", KSME International Journal. Vol. 18, No. 9, pp. 1623-1629.
- J. S. Park et al., 2005, "Study on combustion characteristics and application of radial induced ignition method in an actual engine", International Journal of Automotive Technology. Vol. 6, No. 6, pp. 555-561.
- J. S. Park et al., 2006, "Study on pre-mixture combustion in a sub-chamber type CVC with multiple passage holes", International Journal of Automotive Technology. Vol. 7, No. 1, pp. 17-23.
- J. S. Park et al., 2006, "Study on the radical ignition method using constant volume combustor", WSEAS Transaction on Heat and Mass Transfer. Vol. 6, No. 1, pp. 644-650.
Cited by
- A Basic Study on Combustion Characteristics of Radical Ignition Sub-chamber Type CNG DI Engine vol.22, pp.1, 2018, https://doi.org/10.9726/kspse.2018.22.1.056
- 직접분사 조건에서 충돌벽면이 미치는 영향에 대한 LPG와 CNG의 분무 및 연소 특성 연구 vol.19, pp.4, 2012, https://doi.org/10.9726/kspse.2015.19.4.056
- Effects of Fuel Rail Volume on Gas Injection Characteristics (1) : Injection Quantity vol.23, pp.4, 2019, https://doi.org/10.9726/kspse.2019.23.4.022
- Effects of Fuel Rail Volume on Gas Injection Characteristics (2) : In-rail Pressure Fluctuation Characteristics vol.23, pp.4, 2012, https://doi.org/10.9726/kspse.2019.23.4.031