펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지
DOI QR코드

DOI QR Code

숲가꾸기 산물의 최적용도 개발을 위한 연구 (제1보) - 단일 수종으로 제조된 크라프트 펄프의 특성 연구 -

Optimum Use of Forest Biomass Generated from the National Forest Management Operation (Part 1) - Study of Characteristics of Kraft Pulps Made from Single Wood Species -

  • 박현진 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 김철환 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 이지영 (경상대학교 임산공학과) ;
  • 이경선 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 이지영 (경상대학교 임산공학과/농업생명과학연구원) ;
  • ;
  • 심성웅 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 임수진 (경상대학교 임산공학과/농업생명과학연구원) ;
  • 이영민 ((주)동우펄프하이텍) ;
  • 안병일 (고려대학교 식품자원경제학과)
  • 투고 : 2012.09.19
  • 심사 : 2012.10.20
  • 발행 : 2012.10.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was carried out to investigate pulping properties of the forest biomass arising from the national forest management operation. The forest biomass was collected and classified into many groups according to their species and age. After the chips were made from the forest biomass, the measurement of chip size and chemical analysis were performed. To make the pulps from the forest biomass, the kraft pulping was applied and thereafter the physical and optical properties of kraft pulps were measured. The pulp fibers from the forest biomass had the similar mean fiber length, but their properties became different according to wood species and ages. Differently from the other species, kraft pulps from chestnut wood had the highest kappa number. Acacia, paulownia and chestnut woods made kraft pulps with lower tensile strength and brightness than the others. It could be concluded that acacia, paulownia and chestnut woods must be screened out in order to make a good quality of kraft pulps while being collected during Forest Management Operation.

키워드

참고문헌

  1. Ahn, B-I, Lee, K-S, Kim, C-H and Lee, J-Y, Estimation of Forest Biomass Arising from Forest Management Operation I, Journal of Korea Tappi 41(4): 15-24 (2009).
  2. 산림청, 2010년 산림과 임업동향에 관한 연차보고서, pp317.
  3. 석현덕, 민경택, 손철호, 장우환, 목질 바이오매스 열에너지 개발의 경제성 분석과 에너지용 산림폐재의 지속적 확보방안, 한국농촌경제연구원(2005), pp56.
  4. 산림청, 목재 펠릿의 에너지 활용대책(2009).
  5. 신두식, 목재펠릿산업현황, 산림 1월호: 98-101(2010).
  6. 김유진, 국제펄프가격 중기 전망에 따른 국내 제지산업의 수익성 변화, 산업연구(하나금융경영연구소) 제 8호: 5-22(2010).
  7. 한국제지공업연합회, 2011년 제지산업통계연보.
  8. Kim, C-H, Moon, J-M, Kim, E-G and Ahn, B-I, Input-output Analysis for Pulp, Paper and Paper Product Industries, Journal of Korea Tappi. 42(4): 45-55(2010).
  9. Lee, K-H, Kim, C-H, Kim, E-G and Ahn, B-I, Analysis on the Relationship bewteen the Prices of Pulps and Wood Chips, Journal of Korea Tappi. 43(3):128-136 (2011).
  10. Argyropoulos, D.S., Materials, Chemicals, and Energy from Forest Biomass: 434-462(2007).
  11. Jokinen, O. and Ebeling, K., Flocculation tendency of papermaking fibres, Paperi ja Puu, 67(5): 317-325 (1985).
  12. Kerekes, R.J. and Schell, C.J., Effects of fiber length and coarseness on pulp flocculation, Tappi J. 78(2): 133-139 (1995).
  13. Horn, R.A., Morphology of pulp fiber from hardwoods and influence on paper strength, USDA Research Paper FPL 312: 1-9(1978).
  14. Macleod, M., The top ten factors in kraft pulp yield, Paperi ja Puu, 89(4): 1-7(2007).
  15. Nanko, H., Button, A., and Hillman, D., Atlas of Market Pulps, Chapter VII. Market Pulp Atlas, p.113-238 (2004).
  16. Hausalo, T. and Söderhjelm, L., Papermaking Science and Technology, Vo1. 17 Pulp and Paper Testing, Levlin, J-E (ed.), PI and TAPPI Press, p.111-136 (1999).
  17. Smook, G.A., Handbook for Pulp and Paper Technologists, Angus Wilde Publications Inc., pp 78-80 (2002).