Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Pushover Analysis of a 5-Story RC OMRF Considering Inelastic Shear Behavior of Beam-Column Joint

보-기둥 접합부 비탄성 전단거동을 고려한 5층 철근콘크리트 보통모멘트골조의 푸쉬오버해석

  • Received : 2012.02.13
  • Accepted : 2012.07.09
  • Published : 2012.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the effects of the inelastic shear behavior of beam-column joint and the vertical distribution of lateral load are evaluated considering higher modes on the response of RC OMRF using the pushover analysis. A structure used for the analysis was a 5-story structure located at site class SB and seismic design category C, which was designed in accordance with KBC2009. Bending moment-curvature relationship for beam and column was identified using fiber model. Also, bending moment-rotation relationship for beam-column joint was calculated using simple and unified joint shear behavior model and moment equilibrium relationship for the joint. The results of pushover analysis showed that, although the rigid beam-column joint overestimated the stiffness and strength of the structure, the inelastic shear behavior of beam-column joint could be neglected in the process of structural design since the average response modification factor satisfied the criteria of KBC2009 for RC OMRF independent to inelastic behavior of joint.

이 논문에서는 푸쉬오버해석을 통해 보-기둥 접합부 비탄성 전단거동과 고차모드를 고려한 횡하중 수직분포 형태가 구조물 거동에 미치는 영향을 알아보기 위해 지반조건 $S_B$ 내진설계범주 C에 대해서 5층 철근콘크리트 보통모멘트골조를 KBC2009에 맞게 구조설계 하였다. 보 및 기둥 부재의 휨모멘트-곡률 관계는 섬유모델(fiber model)로 확인하였으며 보-기둥 접합부 모멘트-회전각 관계는 simple and unified joint shear behavior model과 보-기둥 접합부 모멘트 평형관계를 이용하여 확인하였다. 푸쉬오버해석 결과 보-기둥 접합부를 강체로 고려하는 경우 구조물의 강성도 및 강도가 과대평가 되었으나 반응수정계수는 접합부 비탄성거동과 관계없이 KBC2009 보통모멘트골조 계수를 만족하여 구조 설계 과정에서 보-기둥 접합부의 비탄성 전단거동을 고려하지 않아도 문제가 없을 것으로 판단된다.

Keywords

References

  1. Kim, G. W., Song, J. G., Jung, S. J., Song, Y. H., and Lee, S. C, "Design of Lateral Load Resisting System Using Nonlinear Static Analysis," Journal of Earthquake Engineering Society of Korea, Vol. 10, No. 1, 2006, pp. 9-16. https://doi.org/10.5000/EESK.2006.10.1.009
  2. Freeman, S., Sasaki, K., and Paret, T. "Multi-Mode Pushover Procedure (MMP) a Method to Identify the Effects of Higher Modes in a Pushover Analysis," Proceedings of the 6th National Conference on Earthquake Engineering, EERI, Seattle, Washington, 1998.
  3. Minister of Land, Transport and Maritime Affairs, Korean Building Code, Architectural Institute of Korea, Seoul, Korea, 2009.
  4. Minister of Land, Transport and Maritime Affairs, Concrete Structural Design Code, Korea Concrete Institute, Seoul, Korea, 2007.
  5. MacGregor, James G., Wight, and James K., Reinforced Concrete, 4th Ed, Pearson Prentice Hall, 2005, 71 pp.
  6. Hoshikuma, J. and Kawashima, K., "Stress-Strain Model for Confined Reinforced Concrete in Bridge Piers," Journal of Structural Engineering, Vol. 123, No. 5, 1997, pp. 624-633. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(624)
  7. Kim, T. Y. and Kang, S. B., "Structural Analysis Model for Reinforced Concrete Moment-Resisting Frame Systems," Proceedings of the Korea Concrete Institute, Vol. 22, No. 2, 2010, pp. 307-308.
  8. Kim, T. Y. and Kang, S. B., "Analytical Model for Reinforced Concrete Beam-Column Joint," Proceedings of the Korea Concrete Institute, Vol. 22, No. 2, 2010, pp. 309-310.
  9. Kim, J. H. and LaFave, J. M., "Joint Shear Behavior of Reinforced Concrete Beam-Column Connections Subjected to Seismic Lateral Loading," NSEL Report Series Report No. NSEL-020, University of Illinois at Urbana Champaign, 2009.
  10. Ghobarah, A. and Biddah, A., "Dynamic Analysis of Reinforced Concrete Frames Including Joint Shear Deformation," Engineering Structures, Vol. 21, Issue 11, 1999, pp. 971-987. https://doi.org/10.1016/S0141-0296(98)00052-2

Cited by

  1. Seismic Performance Evaluation and Economic Analysis of 5-Story RC Moment-Resisting Frames vol.15, pp.6, 2015, https://doi.org/10.5345/JKIBC.2015.15.6.569
  2. Inelastic Time History Analysis of a 5-Story RC OMRF Considering Inelastic Shear Behavior of Beam-Column Joint vol.24, pp.6, 2012, https://doi.org/10.4334/JKCI.2012.24.6.633