Abstract
Remote handling manipulators are widely used for performing hazardous tasks, and it is essential to ensure the reliable performance of such systems. Toward this end, tendon-driven mechanisms are adopted in such systems to reduce the weight of the distal parts of the manipulator while maintaining the handling performance. In this study, several approaches for the design of a gripper system for a tendon-driven remote handling system are introduced. Basically, this gripper has an underactuated spring mechanism that is combined with a slave manipulator triggered by a master operator. Based on the requirements under the specified tendon-driven mechanism, the connecting position of the spring system on the gripper mechanism and kinematic influence coefficient (KIC) analysis are performed. As a result, a suitable combination of components for the proper design of the target system is presented and verified.
위험지역에서의 작업을 위하여 전세계적으로 원격조작기가 널리 활용되고 있다. 특히 원격 시스템의 경우, 운영되는 환경의 특징상 안정적인 성능이 담보되어야만 하며, 조작기 몸체의 경량화 및 운용환경 외부에서의 유지보수 편리성을 위하여 구동부를 시스템의 기저부에 집중시킬 수 있는 장력구동방식 메커니즘이 주로 활용되고 있다. 본 연구에서는 장력구동 방식 원격조작기에 적용하기 위한 그리퍼 탄성 구동부의 설계를 위해 시도된 접근법을 소개하고자 한다. 제시된 그리퍼 시스템은 기본적으로 스프링 메커니즘에 기반을 둔 4 절 링크형 구조를 가지고 있으며 마스터 조작자에 의해 동작되는 슬레이브 조작기의 말단부에 결합되는 구조를 가진다. 본 논문에서는 이러한 조작기의 요구사항에 맞는 그리퍼의 파지력 및 복원력을 재현하기 위하여 그리퍼 상에서의 적정 스프링 결합위치 및 요구강성과 그에 따른 운동학적 영향계수 등을 분석 및 고찰하였다. 최종적으로는 이러한 분석내용들을 바탕으로, 실제 그리퍼 시스템에 적용함으로써 타당성을 검증하였다.