초록
동축형 다공성재 분사기에서는 중심 액체제트 주위를 둘러싼 원통형 다공성재의 내부 표면에서 반경방향으로 분사된 기체가 중심액체제트와 상호작용을 하게 된다. 표면분사된 기체제트는 반경방향에서 축방향으로 발달하며, 그 과정에서 액체분무의 중심부까지 운동량을 효과적으로 전달하여 미립화 및 혼합 성능을 향상시킨다. 본 연구에서는 기체분사 면적 및 기체분사 질량유량을 변화시켜 각각 운동량 비 및 웨버수의 크기를 조절하였으며, 이에 따른 물-공기 모사추진제 수류시험에서의 분무특성에 대한 고찰을 수행하고 동일 스케일의 전단 동축형 분사기와의 비교 분석이 이루어졌으며, 동축형 다공성재 분사기에서 반경방향으로의 기체분사가 2상유체의 미립화/혼합에 긍정적인 영향을 주는 것으로 판단된다.
The gas jet from a coaxial porous injector for two-phase flows is discharged from the porous surface, which encloses the center liquid jet, and the gas and liquid jet interact with each other physically. The wall injected gas jet transfers the radial momentum effectively while the radial gas jet develops to axial jet, and the performance of atomizing and mixing can be improved. In this study, the Weber number and the ratio of momentum flux were controlled by changing the gas injection area and the mass flow rate of the gas jet, and a study on the spray characteristics at the cold-flow test using water and air simulant was performed. It is concluded that the radial momentum transfer concept of a coaxial porous injector gives a positive effect on the atomization and mixing of the two-phase spray.