참고문헌
- J. Huh, H. Huh, C. S. Lee, 2011, Effect of Strain Rate on the Anisotropic Deformation Behavior of Advanced High Strength Steel Sheets, Trans. Mater. Process, Vol. 20, No. 8, pp. 595-600. https://doi.org/10.5228/KSTP.2011.20.8.595
- H. Huh, S. B. Kim, J. H. Song, J. H. Lim, 2008, Dynamic Tensile Characteristics of TRIP-type and DP-type Steel Sheets for an Auto-Body, Int. J. Mech. Sci., Vol. 50, No. 5, pp. 918-931 https://doi.org/10.1016/j.ijmecsci.2007.09.004
- H. Huh, J. H. Lim, S. H. Park, 2009, High Speed Tensile Test of Steel Sheets for the Stress-strain Curve at the Intermediate Strain Rate, Int. J. Automot. Technol., Vol. 10, No. 2, pp. 195-204. https://doi.org/10.1007/s12239-009-0023-3
- H. S. Kim, M. Koc, 2008, Numerical Investigations on Springback Characteristics of Aluminum Sheet Metal Alloys in Warm Forming Conditions, J. Mater. Process. Technol., Vol. 204, No. 1, pp. 370-383. https://doi.org/10.1016/j.jmatprotec.2007.11.059
- C. Gomes, O. Onipede, M. Lovell, 2005, Investigation of Springback in High Strength Anisotropic Steels, J. Mater. Process. Technol., Vol. 159, No. 1, pp. 91-98. https://doi.org/10.1016/j.jmatprotec.2004.04.423
- D. Zhang, Z. Cui, X. Ruan, Y. Li, 2007, An Analytical Model for Predicting Springback and Side Wall Curl of Sheet after U-bending, Int. J. Comput. Mater. Sci., Vol. 38, No. 1, pp. 707-715. https://doi.org/10.1016/j.commatsci.2006.05.001
피인용 문헌
- Application of Springback Analysis in the Development of a Reinforce Center Pillar Stamping Die vol.23, pp.5, 2014, https://doi.org/10.5228/KSTP.2014.23.5.297
- An Analysis on Durability Improvement of Twist Run Exercise Equipment vol.13, pp.5, 2014, https://doi.org/10.14775/ksmpe.2014.13.5.116