DOI QR코드

DOI QR Code

Laboratory Testing of Material Properties of Asphalt Binder Containing Wasted Vinyl

폐비닐을 함유한 아스팔트 바인더 물성의 실내 시험

  • 이강훈 (인하대학교 토목공학과, 한국과학기술기획평가원) ;
  • 김영진 (한국건설기술연구원 Geo인프라연구실) ;
  • 김병준 (인하대학교 토목공학과) ;
  • 임진선 (인하대학교 토목공학과, 서울연구원 초빙부) ;
  • 정진훈 (인하대학교 토목공학과)
  • Received : 2012.08.31
  • Accepted : 2012.10.04
  • Published : 2012.10.15

Abstract

PURPOSES: In this study, various laboratory tests were performed to investigate the suitability of wasted vinyl as a modifier of asphalt binder. METHODS: Based on the ASTM specification, variations in material properties of asphalt binder such as penetration, flash point, softening point, ductility, penetration index (PI), and performance grade (PG) with vinyl content were tested and analyzed. RESULTS: Lavoratory tests revealed that penetration and ductility of the asphalt binder increased with the vinyl content. The flash point, softening point, and PI decreased, and PG changed from 64-22 to 70-22 with increase of the vinyl content. CONCLUSIONS: Wasted vinyl modified the material properties of the asphalt binder. However, the asphalt binder with vinyl content over 6.0% was unsuitable as a pavement material.

Keywords

References

  1. Gonzalez, O., Munoz, M. E., Santamaria, A., Garcia-Morales, M., Navarro, F. J., Partal, P., 2004. Rheology and Stability of Bitumen/EVA Blends, European Polymer Journal, Vol. 40, Iss. 10, 2365-2372. https://doi.org/10.1016/j.eurpolymj.2004.06.001
  2. Habib, N. Z., Kamaruddin, I., Napiah, M., Tan, I. M., 2011. Rheological Properties of Polyethylene and Polypropylene Modified Bitumen, International Journal of Civil and Environmental Engineering, Vol. 3, No. 2, 96-100.
  3. Hinislioglu, S., Aras, H. N., Bayrak, O. U., 2005. Effects of High Density Polyethylene on the Permanent Deformation of Asphalt Concrete, Indian Journal of Engineering & Material Sciences, Vol. 12, No. 5, 456-460, 2005.
  4. Lee, H. I., 2008. A Research on Characteristics of a Specific Polymer-modified Asphalt Concrete, Master Thesis, Kangwon University, Korea. (이학일 (2008). 특정 폴리머 개질 아스팔트 콘크리트의 특성 연구. 석사학위논문. 강원대학교)
  5. Lee, S. H., 2005. Modified and Special Asphalt Pavement Handbook, Goomi Book. (이석홍 (2005). 개질 및 특수아스팔트포장 핸드북. 구미서관)
  6. Lesueur, D., 2009. The Colloidal Structure of Bitumen: Consequences on the Rheology and on the Mechanism of Bitumen Modification, Advances in Colloid and Interface Science, Vol. 145, Iss. 1-2, 42-82. https://doi.org/10.1016/j.cis.2008.08.011
  7. Lu, X., Isacsson, U., 1997. Compatibility and Storage Stability of Styrene-butadiene-styrene Copolymer Modified Bitumens, Journal of Materials and Structure, Vol. 30, No. 10. 618-626. https://doi.org/10.1007/BF02486904
  8. Ouyang, C., Wang, S., Zhang, Y., Zhang, Y., 2006. Low-Density Polyethylene/Silica Compound Modified Asphalts with High-Temperature Storage Stability, Journal of Applied Polymer Science, Vol. 101, Iss. 1, 472-479. https://doi.org/10.1002/app.23029
  9. Pfeiffer, J. P., Van Doormal, P. M., 1936. The Rheological Properties of Asphaltic Bitumens, Journal of the Institute of Petroleum, Vol. 22, 414-440.
  10. Stastna, J., Zanzotto, L., Vacin, O. J., 2002. Viscosity Functions in Polymer Modified Asphalts, Journal of Colloid and Interface Science, Vol. 259, Iss. 1, 200-209.
  11. Whiteoak, D., Read, J., 2003. The Shell Bitumen Handbook, 5th Edition, Shell Bitumen, Tomas Telford Ltd.