DOI QR코드

DOI QR Code

Implementation of AC Direct Driver Circuit for Ultra-slim LED Flat Light System

초슬림 LED 면조명 기구용 교류 직결형 구동 회로 구현

  • Received : 2012.07.24
  • Accepted : 2012.09.06
  • Published : 2012.09.30

Abstract

LEDs are becoming the most suitable candidate replacing traditional fluorescent lamps because of its eco-friendly characteristics. LEDs are also actively used to design green building system and to make outdoor billboard as a back-light system due to its high energy efficiency. In this paper, we have developed AC direct driver for $12{\times}12$ FLB(flexible LED board) and LED flat light without SMPS. It has LID-PC-R101B driver IC that can support the high power factor and be composed of LED switching circuit in group. Also, an elaborate system designs can guarantee a high luminous efficiency, a high reliability and a low power consumption. The proposed FLB has the ultra slim shape of $450{\times}450$ mm, width of 4 mm and weight of 280 g. In the end, we have developed a prototype of FLB for billboard and flat light for room lighting with AC direct driver iposrder to verify the performance of the proposed system.

LED는 환경 친화적인 광원으로 에너지 절약을 위해 기존 조명등을 빠른 속도로 대체하고 있다. 최근에는 에너지 소비가 많은 빌딩의 설계와 옥 내외 광고를 제작함에 있어서 LED를 적극 채택하여 그린 빌딩 및 고효율 저비용 백라이트 도입에 박차를 가하고 있다. 특히 기존의 형광등을 이용했던 실내등과 광고판용 백라이트 분야는 전력소비가 많을 뿐 아니라 SMPS(switched mode power supply)에 의한 부피, 무게 및 수명제한의 제약이 있었다. 그러므로 본 논문에서는 SMPS가 필요 없는 $12{\times}12$ FLB(flexible LED board)와 실내등용 LED 면조명을 위한 AC 직결형 구동기를 개발하였다. 제안 시스템은 고역율의 LID-PC-R101B 칩셋을 포함하고 고효율을 위한 LED 스위치 회로들로 구성되어 있다. 정교한 시스템 디자인을 통해 고효율, 높은 안정성 및 낮은 에너지 소비의 장점을 가지게 한다. 제안된 FLB는 크기 $450{\times}450$ mm, 두께 4 mm 그리고 무게 280 g의 초슬림 구조를 가진다. 최종적으로 제안시스템의 성능검증을 위해 교류 직결형 구동 회로를 채택한 FLB와 면조명의 시제품을 제작하여 실험하였다.

Keywords

References

  1. Ogungbenro O.A., Ndinechi M.C., "Design, construction and testing of multipurpose energy saving LEDs and its implications on energy crisis in Nigeria", Adaptive Science and Technology (ICAST), 2011 3rd IEEE International Conference, pp. 226-230, 2011.
  2. Huynh T.P., Tan Y.K., Tseng K.J., "Energy-aware wireless sensor network with ambient intelligence for smart LED lighting system control", IECON 2011 - 37th Annual Conference on IEEE Industrial Electronics Society, pp. 2923-2928, 2011.
  3. Fusheng Li, Dahua Chen, Xianjie Song, Yuming Chen, "LEDs: A Promising Energy-Saving Light Source for Road Lighting", Power and Energy Engineering Conference, 2009. APPEEC 2009. Asia-Pacific", pp. 1-3, 2009.
  4. Yuan Zhang, Lu Nie, "The situation and prospect of Led lighting using in building illumination design", Mechanic Automation and Control Engineering (MACE), 2011 Second International Conference on, pp. 3700-3701, 2011.
  5. Zhenhua Jiang, Rahimi-Eichi H., "Design, modeling and simulation of a green building energy system", Power & Energy Society General Meeting, 2009. PES '09. IEEE, pp. 1-7, 2009.
  6. Sang-bin Song, Woo-young Cheon, Young-녀 Yu, "Design of a LED lighting bar replacement neon sign ", Journal of the Korean Institute of Electrical Engineers, pp. 1671-1672, July, 2006.
  7. Hyeon-Hui Choei, Wang-Seop Choi, Chong-Yun Park, "Design of the Electric Ballast for 70W CDM Lamp", Journal of the Korean Institute of Electrical Engineers, pp. 940-941, July, 2009.
  8. B. H. Lee, H. J. Kim, B. C. Kim and C. T. Lim, "Development of the Optimum Power Driver Circuit for AC LED", Journal of the The Korean Institute of Power Electronics, pp. 426-427, 2010.
  9. Sangil Kim, J. H. Kim, J. W. Back, D.W. Yu, Indong Kim, "Design of lighting Fluorescent lamp and AC LED control board using MCU", Journal of the The Korean Institute of Power Electronics, pp. 252-253, 2010.
  10. Youngrok Heo, Sungho Yoo, Janghee Yun, Jeongduk Ryeom, "Characteristics of ultrasonic sensors for Flat LED Lamp lighting control", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, pp. 16-17, May, 2012.
  11. Sung Gi Chae, Yoon Chul Lee, Dong wan Jung, Kang Ho Kim, Yong Ick Cho, "Optical Characteristic Evaluation and Simulation Analysis of LED Flat Luminaires used Dimming Function", The Korean Institute of Illuminating and Electrical Installation Engineers, pp. 57-59, May, 2011.
  12. Fathi M., Chikouche A., Abderrazak M., "Design and realization of LED Driver for solar street lighting applications", Energy procedia, Vol. 9, pp. 161 - 166, 2011.
  13. Technical application note of Login Digital, "LID-PC-R201B Packing Specification," 2010
  14. DS Technical Report, "High PF/AC Direct LED Driver," June 2004.