Preventive Nutrition and Food Science

The Korean Society of Food Science and Nutrition (한국식품영양과학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Extrusion Conditions on the Physicochemical Properties of Extruded Red Ginseng

  • Gui, Ying (Department of Food Science and Technology, Kongju National University) ;
  • Gil, Sun-Kuk (Department of Food Science and Technology, Kongju National University) ;
  • Ryu, Gi-Hyung (Department of Food Science and Technology, Kongju National University)
  • Received : 2012.07.03
  • Accepted : 2012.07.30
  • Published : 2012.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of variable moisture content, screw speed and barrel temperature on the physicochemical properties of red ginseng powder extrudates were investigated. The raw red ginseng powders were processed in a co-rotating intermeshing twin-screw extruder. Primary extrusion variables were feed moisture content (20 and 30%), screw speed (200 and 250 rpm) and barrel temperature (115 and $130^{\circ}C$). Extruded red ginseng showed higher crude saponin contents (6.72~7.18%) than raw red ginseng (5.50%). Tested extrusion conditions did not significantly affect the crude saponin content of extrudates. Increased feed moisture content resulted in increased bulk density, specific length, water absorption index (WAI), breaking strength, elastic modulus and crude protein content and decreased water solubility index (WSI) and expansion (p<0.05). Increased barrel temperature resulted in increased total sugar content, but decreased reducing sugar content in the extrudate (p<0.05). Furthermore, increased barrel temperature resulted in increased amino acid content and specific length and decreased expansion and bulk density of extrudates only at a higher feed moisture content. The physicochemical properties of extrudates were mainly dependent on the feed moisture content and barrel temperature, whereas the screw speed showed a lesser effect. These results will be used to help define optimized process conditions for controlling and predicting qualities and characteristics of extruded red ginseng.

Keywords

References

  1. Kang KS, Yokozawa T, Kim HY, Park JH. 2006. Study on the nitric oxide scavenging effects of ginseng and its compounds. J Agric Food Chem 54: 2558-2562. https://doi.org/10.1021/jf0529520
  2. An YE, Ahn SC, Yang DC, Park SJ, Kim BY, Baik MY. 2011. Chemical conversion of ginsenosides in puffed red ginseng. LWT-Food Sci Technol 44: 370-374. https://doi.org/10.1016/j.lwt.2010.09.013
  3. Bae E, Han MJ, Choo M, Park S, Kim D. 2002. Metabolism of 20(S)-and 20(R)-ginsenoside Rg3 by human intestinal bacteria and its relation to in vitro biological activities. Biol Pharm Bull 25: 58-63. https://doi.org/10.1248/bpb.25.58
  4. Nam KY. 2005. The comparative understanding between red ginseng and white ginsengs processed ginsengs (Panax ginseng C. A. Meyer). J Ginseng Res 29: 1-18. https://doi.org/10.5142/JGR.2005.29.1.001
  5. Kim WY, Kim JM, Han SB, Lee SK, Kim ND, Park MK, Kim CK, Park JH. 2000. Steaming of ginseng at high temperature enhances biological activity. J Nat Prod 63: 1702- 1704. https://doi.org/10.1021/np990152b
  6. Serge EO, Gu BJ, Kim YS, Ryu GH. 2011. Effects of feed moisture and barrel temperature on physical and pasting properties of cassava starch extrudate. Korean J Food Preserv 18: 271-278. https://doi.org/10.11002/kjfp.2011.18.3.271
  7. Matz SA. 1959. The chemistry and technology of cereals as food and feed. AVI Publishing Company Inc., Westport, CT, USA.
  8. Ryu GH. 2007. Recent trend in red ginseng manufacturing process and characteristics of extruded red ginseng. Food Eng Prog 11: 1-10.
  9. Ha DC, Lee IW, Ryu GH. 2005. Change in ginsenosides and maitol in dried raw ginseng during extrusion process. Korean Soc Food Sci Biotechnol 14: 363-367.
  10. Ryu GH. 2006. Microstructure and antioxidant activity of red, white and extruded ginseng. J Food Sci Nutr 11: 61- 66. https://doi.org/10.3746/jfn.2006.11.1.061
  11. Ha DC, Lee JW, Ryu GH. 2005. Effect of barrel temperature and screw speed on characteristics of extruded raw ginseng. J Ginseng Res 29: 107-112. https://doi.org/10.5142/JGR.2005.29.2.107
  12. Han CK, Hong HD, Kim YC, Kim SS, Sim GS. 2007. Effect of puffing on quality characteristics of red ginseng tail root. J Ginseng Res 31: 147-153. https://doi.org/10.5142/JGR.2007.31.3.147
  13. AOAC. 2005. Official methods of analysis of AOAC international. 18th ed. Association of Official Analytical Chemists, Washington, DC, USA.
  14. Bhatnagar S, Hanna MA. 1995. Physical, mechanical, and thermal properties of starch-based plastic foams. Trans ASAE 38: 567-571. https://doi.org/10.13031/2013.27867
  15. Anderson RA, Conway HF, Pfeifer VF, Griffin EL. 1969. Roll and extrusion-cooking of grain sorghum grits. Cereal Sci Today 14: 372-375.
  16. Ryu GH, Ng PKW. 2001. Effect of selected process on expansion and mechanical properties on wheat flour and cornmeal extrudates. Strach/Starke 53: 147-154. https://doi.org/10.1002/1521-379X(200104)53:3/4<147::AID-STAR147>3.0.CO;2-V
  17. Ando T, Tanaka O, Shibata S. 1971. Chemical studies on the oriental plant drugs (XXV). Comparative studies on the saponins and sapogenins of ginseng and relate crude drugs. Soyakugaku Zasshi 25: 28-33.
  18. Namba T, Yoshizaki M, Tominori T, Kobashi K, Matsui K, Hase J. 1974. Fundamental studies on the evaluation of the crude drugs. III. Chemical and biochemical evaluation of ginsengs and related crude drugs. Yakugaku Zasshi 94: 252-259. https://doi.org/10.1248/yakushi1947.94.2_252
  19. Dubois M, Gillers KA, Hamilton JK, Rebers PA, Smith F. 1956. Colormetric method for determination of sugar and related substance. Anal Chem 28: 350-352. https://doi.org/10.1021/ac60111a017
  20. Miller GL. 1959. Use of dinitrosalicylic acid reagent for determination of reducing sugar. Anal Chem 31: 426-428. https://doi.org/10.1021/ac60147a030
  21. Doi E, Shibata D, Matoba T. 1981. Modified colorimetric ninhydrin method for peptidase assay. Anal Biochem 118: 173-184. https://doi.org/10.1016/0003-2697(81)90175-5
  22. Hagenimana A, Ding XL, Fang T. 2006. Evaluation of rice flour modified by extrusion cooking. J Cereal Sci 43: 38-46. https://doi.org/10.1016/j.jcs.2005.09.003
  23. PanmanaBhan M, Bhattachayrya M. 1989. Extrudate expansion during extrusion cooking of foods. Cereal Food World 34: 945-949.
  24. Alvarez-Martinez L, Kondury KP, Harper JM. 1988. A general model for expansion of extruded products. J Food Sci 53: 609-615. https://doi.org/10.1111/j.1365-2621.1988.tb07768.x
  25. Fletcher SI, Richmond P, Smith AC. 1985. An experimental study of twin-screw extrusion cooking of maize grits. J Food Eng 4: 291-312. https://doi.org/10.1016/0260-8774(85)90009-3
  26. Anderson RA, Conway HF, Pfeifer VF, Griffin EL. 1969. Gelatinization of corn grits by roll and extrusion cooking. Cereal Sci Today 14: 4-12.
  27. Kirby AR, Ollett AL, Parker R, Smith AC. 1988. An experimental study of screw configuration effects in the twin-screw extrusion-cooking of maize grits. J Food Eng 8: 247-272. https://doi.org/10.1016/0260-8774(88)90016-7
  28. Mercier C, Feillet P. 1975. Modification of carbohydrate component by extrusion cooking of cereal product. Cereal Chem 52: 283-297.
  29. Chen J, Serafin FL, Pandya RN, Dau H. 1991. Effects of extrusion conditions on sensory properties of corn meal extrudates. J Food Sci 56: 84-89. https://doi.org/10.1111/j.1365-2621.1991.tb07981.x
  30. Kim BS, Ryu GH. 2005. Effect of die temperature and dimension on extract characteristics of extruded white ginseng. J Korean Soc Food Sci Nutr 34: 544-548. https://doi.org/10.3746/jkfn.2005.34.4.544
  31. Yoon SR. Lee MH, Park JH. 2005. Changes in physicochemical compounds with heating treatment of ginseng. J Korean Soc Food Sci Food Nutr 34: 1572-1578. https://doi.org/10.3746/jkfn.2005.34.10.1572
  32. Han JY, Chung KH, Ryu GH. 2008. Comparison of physicochemical properties and release characteristics of extruded tissue cultured mountain ginseng. J Korean Soc Food Sci Nutr 37: 1018-1024. https://doi.org/10.3746/jkfn.2008.37.8.1018
  33. Kim MH, Tungjaroenchai W, Ryu GH. 2007. Effect of germination time and extrusion temperature on properties of germinated brown rice. J Korean Soc Food Sci Nutr 36: 636-642. https://doi.org/10.3746/jkfn.2007.36.5.636
  34. Shivendra S, Lara W, Shirani G. 2007. Retention of essential amino acids during extrusion of protein and reducing sugar. J Agric Food Chem 55: 8779-8786. https://doi.org/10.1021/jf071769z

Cited by

  1. Effects of protein-lipid and starch-lipid complexes on textural characteristics of extrudates based on wheat flour with the addition of oleic acid vol.51, pp.5, 2016, https://doi.org/10.1111/ijfs.13070
  2. Potential Neuroprotective Activity of Ginseng in Parkinson’s Disease: A Review vol.10, pp.1, 2015, https://doi.org/10.1007/s11481-014-9569-6
  3. Influences of Die Temperature and Repeated Extrusion on Physical Properties of Extruded White Ginseng vol.44, pp.6, 2015, https://doi.org/10.3746/jkfn.2015.44.6.921
  4. ‘The effect of inulin addition on structural and textural properties of extruded products under several extrusion conditions’ vol.52, pp.10, 2015, https://doi.org/10.1007/s13197-015-1718-2
  5. Effects of extrusion cooking on physicochemical properties of white and red ginseng (powder) vol.38, pp.2, 2014, https://doi.org/10.1016/j.jgr.2013.12.002
  6. Physical properties of supercritical fluid extrusion products composed of milk protein concentrate with carbohydrates vol.53, pp.3, 2017, https://doi.org/10.1111/ijfs.13624
  7. Enrichment of rice-based extrudates with Cactus Opuntia dillenii seed powder: a novel source of fiber and antioxidants vol.55, pp.2, 2018, https://doi.org/10.1007/s13197-017-2961-5
  8. ) noodles pp.20487177, 2018, https://doi.org/10.1002/fsn3.786
  9. Properties of Starch after Extrusion: A Review pp.00389056, 2018, https://doi.org/10.1002/star.201700110
  10. Stiffness Comparison of Tissue Phantoms using Optical Coherence Elastography without a Load Cell vol.1, pp.1, 2017, https://doi.org/10.3807/copp.2017.1.1.017
  11. Effect of barrel temperature and blending ratio on the sensory and physical properties of cassava-extruded snacks vol.5, pp.1, 2012, https://doi.org/10.1080/23311932.2019.1633795
  12. Optimization of extruder cooking conditions for the manufacture of fish feeds using response surface methodology vol.42, pp.2, 2012, https://doi.org/10.1111/jfpe.12980
  13. Modeling of coconut milk residue incorporated rice‐corn extrudates properties using multiple linear regression and artificial neural network vol.42, pp.2, 2012, https://doi.org/10.1111/jfpe.12981
  14. Multi‐response optimization of extrusion conditions of grain amaranth flour by response surface methodology vol.7, pp.12, 2012, https://doi.org/10.1002/fsn3.1284
  15. Chemical Comparison of White Ginseng before and after Extrusion by UHPLC-Q-Orbitrap-MS/MS and Multivariate Statistical Analysis vol.2020, pp.None, 2012, https://doi.org/10.1155/2020/4764219
  16. Effect of high-temperature, short-time cooking conditions on in vitro protein digestibility, enzyme inhibitor activity and amino acid profile of selected legume grains vol.6, pp.11, 2012, https://doi.org/10.1016/j.heliyon.2020.e05419
  17. Effects of soy flour types and extrusion-cooking conditions on physicochemical, microstructural and sensory characteristics of puffed rice snack base vol.17, pp.6, 2012, https://doi.org/10.1515/ijfe-2019-0157
  18. Effects of soy flour types and extrusion-cooking conditions on physicochemical, microstructural and sensory characteristics of puffed rice snack base vol.17, pp.6, 2012, https://doi.org/10.1515/ijfe-2019-0157