DOI QR코드

DOI QR Code

중형 공정열교환기 시제품 고온구조해석

High-Temperature Structural Analysis of a Medium-Scale Process Heat Exchanger Prototype

  • 송기남 (한국원자력연구원 수소생산원자로기술개발부) ;
  • 홍성덕 (한국원자력연구원 수소생산원자로기술개발부) ;
  • 박홍윤 (에이디 솔류션)
  • 투고 : 2012.03.02
  • 심사 : 2012.08.09
  • 발행 : 2012.10.01

초록

수소를 대량으로 생산하기 위한 원자력수소생산시스템에서 공정열교환기는 초고온가스로로부터 생성된 초고온 열을 화학반응공정으로 전달하는 핵심기기이다. 한국원자력연구원에 구축되어 있는 소형 가스루프에서 $Hastelloy^{(R)}$-X 로 제작된 중형 공정열교환기 시제품에 대한 성능시험이 계획되어 있다. 본 연구에서는 중형 공정열교환기의 고온구조건전성을 파악하기 위한 선행 연구로서 소형가스루프 시험조건하에서 중형 공정열교환기 시제품의 고온구조해석을 이전 연구에서 확립된 경계조건을 적용하여 수행하였다. 해석결과는 소형가스루프에서의 중형 공정열교환기 시제품에 대한 성능시험 결과와 비교할 예정이다.

A process heat exchanger (PHE) in a nuclear hydrogen system is a key component for transferring the considerable heat generated in a very high temperature reactor (VHTR) to a chemical reaction that yields a large quantity of hydrogen. A performance test on a medium-scale PHE prototype made of $Hastelloy^{(R)}$-X is scheduled in a small-scale gas loop at the Korea Atomic Energy Research Institute. In this study, as a preliminary study before carrying out the performance test in the gas loop, high-temperature structural analysis modeling and macroscopic thermal and structural analysis of the medium-scale PHE prototype by imposing the established displacement boundary constraints were carried out under the gas loop test condition. The results obtained in this study will be compared with the performance test results of the medium-scale PHE prototype in the gas loop.

키워드

참고문헌

  1. US DOE, 2009, Financial Assistance Funding Opportunity Announcement, NGNP Program.
  2. AREVA, 2007, NGNP with Hydrogen Production Pre-Conceptual Design Studies Report, Doc. No. 1209052076-000.
  3. Idaho National Laboratory, 2007, NGNP Preconceptual Design Report, INL/EXT-07-12967.
  4. Westinghouse, 2007, NGNP and Hydrogen Production Pre-Conceptual Design Report, NGNPESP- RPT-001, Rev 1.
  5. Chang, J. H., et al., 2007, "A Study of a Nuclear Hydrogen Production Demonstration Plant," Nuclear Engineering and Technology, Vol. 39, No. 2, pp. 111-122. https://doi.org/10.5516/NET.2007.39.2.111
  6. Lee, W. J., Lee, W. J., Kim, Y. W. and Chang, J. H., 2009, "Perspectives of Nuclear Heat and Hydrogen," Nuclear Engineering and Technology, Vol. 41, No. 4, pp. 413-426. https://doi.org/10.5516/NET.2009.41.4.413
  7. Shin, Y. J., et al., 2009, "A Dynamic Simulation of the Sulfuric Acid Decomposition Process in a Sulfuriodine Nuclear Hydrogen Production Plant," Nuclear Engineering and Technology, Vol. 41, No. 6, pp. 831-840. https://doi.org/10.5516/NET.2009.41.6.831
  8. Kim, Y.-W., et al., 2009, "Development of Essential Technology," KAERR/RR-2992/2008.
  9. Kim, Y. W., 2008, "High Temperature and High Pressure Corrosion Resistant Process Heat Exchanger for a Nuclear Hydrogen Production System," R.O.K Patent # 10-0877574.
  10. Song, K. N., Lee, H. Y., Kim, Y. W., Hong, S. D. and Park, H. Y., 2010, "High-Temperature Structural Analysis Model on the Process Heat Exchanger for Helium Gas Loop (I)," Trans. A of the KSME (A), Vol. 34, No. 09, pp. 1241-1248. https://doi.org/10.3795/KSME-A.2010.34.9.1241
  11. Song, K.-N., Lee, H.-Y., Hong, S.-D. and Park, H.- Y., 2011, "Elastic/Plastic High-Temperature Structural Analysis on the Small-Scale PHE Prototype," Transactions of the KPVP, Vol. 7, No. 2, pp. 1-6.
  12. Song, K.-N., Hong, S.-D. and Park, H.-Y., 2011, "High-Temperature Structural Analysis of a Small- Scale PHE Prototype (IV)-Macroscopic High- Temperature Elastic-Plastic Analysis," Transactions of the KSME (A), Vol. 35, No. 10, pp. 1249-1255. https://doi.org/10.3795/KSME-A.2011.35.10.1249
  13. Song, K.-N., Hong, S.-D. and Park, H.-Y., 2011, "Designing a PHE and Evaluation of High- Temperature Structural Integrity on Its Small-Scale Prototype," Proceedings of the KSME 2011 Fall Annual Meeting.
  14. Song, K.-N., Kang, J.-H., Hong, S.-D. and Park, H.- Y., 2011, "Elastic High-Temperature Structural Analysis on the Small-Scale PHE Prototype Considering the Pipeline Stiffness," Transactions of the KPVP, Vol. 7, No. 3, pp. 48-53.
  15. Siemens PLM Software I-DEAS/TMG User Manual Version 6.1, 2009.
  16. Dassault Systems Simulia ABAQUS User Manual Version 6.9-1, 2009.
  17. $Hastelloy^{(R)}$-X Alloy, Retrieved Jun 26, 2012 from http://www.haynesintl.com/pdf/h3009.pdf.

피인용 문헌

  1. Thermostructural Analysis of Plate-Type Heat Exchanger Prototypes Considering Weld Properties vol.2012, pp.1687-6083, 2012, https://doi.org/10.1155/2012/726489
  2. Macroscopic Structural Analysis on a 10 kW Class Lab-Scale Process Heat Exchanger Prototype under a High-Temperature Gas Loop Condition vol.05, pp.01, 2013, https://doi.org/10.4236/eng.2013.51A017
  3. Evaluation of High-Temperature Structural Integrity Using Lab-Scale PCHE Prototype vol.37, pp.9, 2013, https://doi.org/10.3795/KSME-A.2013.37.9.1189