References
- Easterling, K. E., 1993, "Mathematical Modeling of Weld Phenomena," H. Cerjack and K. E. Easterling Eds, Institute of Materials, pp. 183-200.
- Mackerle, J., 2002, "Finite-Element Analysis and Simulation of Welding - An Addendum: a Bibliography (1996-2001)," Modeling Simul. Sci. Eng., Vol. 10, pp. 295-318. https://doi.org/10.1088/0965-0393/10/3/304
- Lindgren, L. E., 2006, "Numerical Modeling of Welding," Comput. Methods Appl. Mech. Engrg., Vol. 195, pp. 6710-6736. https://doi.org/10.1016/j.cma.2005.08.018
- Zuniga, S. M. and Sheppard, S. D., 1995, "Determining the Constitutive Properties of the Heat- Affected Zone in a Resistance Spot Weld," Modeling Simul. Sci. Eng., Vol. 3, pp. 391-416. https://doi.org/10.1088/0965-0393/3/3/007
- Chidiac, S. E. and Mirza, F. A., 1993, "Thermal Stress Analysis due to Welding Processes by the Finite Element Method," Computers & Structures, Vol. 46, No. 3, pp. 407-412. https://doi.org/10.1016/0045-7949(93)90210-5
- Lee, C. H., Lee, J. B., Park, D. H. and Na, S. J., 2008, "Computer Simulation of Residual Stresses in Welding Process Using Finite Element Method," Material Science Forum, Vol. 580-582, pp. 439-442.
- Yajiang, L., Juan, W., Maoai, C. and Xiaqin, S., 2004, "Finite Element Analysis of Residual Stress in the Welded Zone of a High Strength Steel," Bull. Mater. Sci., Vol. 27, No. 2, pp. 127-132. https://doi.org/10.1007/BF02708494
- Frewin, M. R. and Scott, D. A., 1999, "Finite Element Model of Pulsed Laser Welding," Welding Research Supplement, pp. 15-22.
- Murakawa, H. and Minami, H., 2002, "Development of Finite Element Method for Seam Welding and Its Application to Optimization of Welding Condition," Proc. the Twelfth International offshore and Polar Engineering Conference, Kitakyushu, Japan, pp. 26-31.
- Nam, G. J., Kim, K.W., Hong, U. J., Lee, J. H., Suh, J. and Cho, H. Y., 2006, "Finite Element Analysis of Nd:YAG Pulse Laser Welding for AISI 304 Stainless Steel Plate," Trans. Kor. Soc. Mecha. Eng. A, Vol. 30, pp. 428-434. https://doi.org/10.3795/KSME-A.2006.30.4.428
- Joo, B.-H., Byun, H.-B. and Lee, B.-C., 2005, "Performance Evaluation for the Methods of Spot Weld Modeling Considering Durability," Trans. of KSME A, Vol. 29, No. 8, pp. 1153-1160.
- ASTM E 18, 2008, "Standard Test Methods for Rockwell Hardness of Metallic Materials."
- ASTM E 190-92, 2003, "Standard Test Method for Guided Bend Test for Ductility of Welds. "
- Callister, W. D., 2006, "Materials Science and Engineering: An Introduction," 7th Edition, John Wiley & Sons Inc.
- Pavlina, E. J. and Van Tyne, C. J., 2008, "Correction of Yield Strength and Tensile Strength with Hardness for Steels," JMEPEG, Vol. 17, pp. 888-893. https://doi.org/10.1007/s11665-008-9225-5
- Oliver, W. C. and Pharr, G. M., 1992, "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Measurements," J. Mater. Res., Vol. 7, pp. 1564-1583. https://doi.org/10.1557/JMR.1992.1564