초록
최근 건축구조물의 고층화 및 단면크기의 증대 때문에, 600MPa급 이상의 고강도 후판강재의 개발이 활발하다. 그러나 국내에서 연구되는 이러한 강재는 높은 설계기준강도와 높은 항복비로 인하여 사용이 제한적일 우려가 있다. 그래서 이 연구에서는 일본에서 개발된 저항복강 600MPa급 강재에 대한 기계적 성능을 기본으로 하여, 축력과 휨모멘트를 받는 beam-column의 단조재하실험결과를 이용하여, 연강처럼 건축물에 이용이 가능한지, 그 구조적 특성을 검증한다. 따라서, 이 연구에서는 현재 국내 시험생산된 유사 고강도 강재의 실용적 연구의 기초자료를 제공하고자 한다.
Recently, the development of high-strength thicker steel plate above 600MPa is becoming active due to the increase in both height and member size of architectural structure. However, such steel, which is being investigated in Korea nowadays, has possibility of limited practical application because of high design code strength and high-yield ratio. Therefore, this study performed the validation for the structural performance of beam-column with combined axial force and bending moment whether this beam-column might be attributable as an architectural purpose steel. This study was conducted from the result of monotonic loading test of beam-column, based on the material properties of low-yield, 600MPa class steel which was developed during 1988-1993 in Japan. This study might provide the fundamental database for practical research for these steel which are actively being tested in Korea.