Abstract
Clarify wind energy productivity depends on three factors: the wind probability density function(PDF), the turbine's power curve, and the air density. The wind PDF gives the probability that a variable will take on the wind speed value. Wind shear refers to the change in wind speed with height above ground. The wind speed tends to increase with the height above ground. also, Wind PDF refers to the change with height above ground. Wind analysts typically use the Weibull distribution to characterize the breadth of the distribution of wind speeds. The Weibull distribution has the two-parameter: the scale factor c and the shape factor k. We can use a linear least squares algorithm(or Ln-least method) and moment method to fit a Weibull distribution to measured wind speed data which data was located same site and different height. In this study, find that the scale factor is related to the average wind speed than the shape factor. and also different types of terrain are characterized by different the scale factor slop with height above ground. The gross turbine power output (before accounting for losses) was caculated the power curve whose corresponding air density is closest to the air density. and air desity was choose two way. one is the pressure of the International Standard Atmosphere up to an elevation, the other is the measured air pressure and temperature to calculate the air density. and then each power output was compared.
풍력발전 단지의 수익성 평가를 위해 연간 에너지 생산량(AEP ; Annual Energy Production)의 계산이 중요하다. AEP를 계산하기 위해서는 바람의 확률밀도함수(PDF ; Probability Density Function)와 풍력발전기의 발전곡선(PC; Power Curve)이 필요하며, AEP 예측의 정확성을 향상시키기 위해서는 허브 높이에서의 PDF예측과 그 높이의 공기밀도에 따른 풍력발전기 PC의 결정이 중요하다. 본 연구에서는 제주도 한동, 평대의 실관측 풍황탑(met mast) 자료를 이용하였으며 풍속의 PDF를 Weibull 분포 함수로 가정 하였고 Weibull 함수의 파라미터의 값이 높이에 따라 변화하는 양상을 확인하였다. Weibul 함수의 계산은 모멘트법과 LN-least법을 사용하였으며, 모멘트법과 LN-least법에 의한 형상계수의 경우 높이의 증가에 따라 변화를 보이지 않았고 평균값에서 ${\pm}0.1$의 변화 패턴을 보였다. 척도계수의 경우 높이가 증가함에 따라 선형적으로 증가하였으며 지형별 분류에 따른 높이별 척도계수의 기울기는 확연한 차이를 보이고 있었다. 60m 높이에서 관측된 바람의 상대도수와 관측 값의 높이 보정에 의한 공기밀도와 일반식에 의한 공기밀도를 각각 계산하여 그 결과에 대응하는PC를 선택하여 AEP차이를 계산하였다.