초록
본 연구의 목적은 리브 보강된 강관 접합부의 유한요소 해석을 통하여 접합부의 극한강도를 추정하고 그 거동을 파악하는 것이다. 가셋트 강관 접합부의 강도는 관벽 모멘트에 의한 국부적인 응력집중 및 국부 소성화에 의해 크게 저하된다. 이러한 국부적인 응력분포를 재분배 시킬 목적으로 가셋트 상하 단부에 보강플레이트를 부착하고 있다. 이러한 접합부의 거동은 보강된 리브의 형상 및 보강 방법등에 따라 보강하지 않은 경우와 상당히 다르지만 현행 강관구조 설계식은 제한적인 부분만 다루고 있다. 따라서 본 연구에서는 ABAQUS 6.5.1을 사용하여 리브로 보강된 가셋트-강관 접합부의 거동과 구조적 성능을 파악하고 기존 접합부 내력식과 비교하여 리브 보강된 플레이트 원형 강관 X형 접합부에 적합한 내력식을 제안하고자 한다.
A finite element analysis study was performed to investigate the behavior and strength of a Plate-Circular Hollow Section joint stiffened with Rib-plate, Since The strength of plate-Circular Section joint is reduced by joint of stress and local plastic deformation which is caused by wall moment, rib plates are attached to the upper and lower Plate-Circular Hollow Section joint for redistribution of stress. The behaviors of joints stiffened with Rib-plate according to shape of rib and reinforcing method, etc are different from those of joints which is not stiffened. However, the criterion of hollow structural section was limited on some parts. Therefore, this study intends to investigate the behavior and structural capacity of Plate-Circular Hollow Section joints stiffened with Rib-plate and compare the Finite element analysis with the Design Equation. Finally, this study proposes the reasonable ultimate strength formula through the comparisons with other design guide.