DOI QR코드

DOI QR Code

Crack Control in Beams and One-Way Slabs

보 및 1방향 슬래브의 균열제어

  • Min, Chang-Shik (Dept. of Civil and Environmental Engineering, Dongguk University)
  • 민창식 (동국대학교 건설환경공학과)
  • Received : 2012.01.16
  • Accepted : 2012.06.19
  • Published : 2012.08.31

Abstract

The KCI Building Code (2003 and 2007) provisions to control flexural cracking in beams and one-way slabs are discussed for related researches and the development of the provisions. Based on the basic ideas over the development of current provisions, possible problems with cracking control are identified and discussed for the remedies to fix the problems. Simple and clear equations to control flexural cracking in beams and one-way slabs are presented. The presented equations would avoid any conflicts with other provisions for the spacing of reinforcement.

콘크리트구조설계기준(2003, 2007)의 균열제어방법이 어떠한 연구들에 근거를 두어 제시되었는지 그 발달과정을 검토하였다. 이러한 과정들을 근거로 현행 구조기준의 균열제어방법에 어떠한 문제점들이 발생할 수 있으며 이를 해결하기 위해서는 어떻게 하여야 하는지 제안하였다. 제시한 새로운 균열제어식은 간단하면서도 명확하고 기존의 규정들과 충돌하지 않아 실무자들에게 발생할 수 있는 논란의 여지를 종식시킬 수 있을 것이다.

Keywords

References

  1. Design and Control of Concrete Mixtures, The Guide to Applications, Methods, and Materials, PCA (Portland Cement Association), 15th Edition, 444 pp.
  2. Wight, J. K. and MacGregor, J. G., Reinforced Concrete Mechanics and Design, 6th Edition, Pearson Education, Inc., 2012, 1157 pp.
  3. Leet, K. and Bernal, D., Reinforced Concrete Design, Third Edition, McGraw-Hill Companies, 1997, 546 pp.
  4. 한국콘크리트학회, 콘크리트구조설계기준 해설, 기문당, 2003, 405 pp.
  5. ACI Committee 318-95, Building Code Requirements for Structural Concrete (ACI 318-95) and Commentary (ACI 318R-95), An ACI Standard, American Concrete Institute, Farmington Hills, Michigan 48333-9094, 1995, 369 pp.
  6. Gergely, P. and Lutz, L., "Maximum Crack Width in Reinforced Concrete Flexural Members," Causes, Mechanism, and Control of Cracking In Concrete, SP-20, ACI, 1968, pp. 87-117.
  7. American Concrete Institute, Control of Cracking in Concrete Structures, ACI 224R-01, Reported by ACI Committee 224, 2001.
  8. Canadian Standards Association (CSA) 2007, Design of Concrete Structures, CAN/CSA-A23.3-04, A National Standard of Canada, Approved July 2007, 214 pp.
  9. 국토해양부 제정 콘크리트구조설계기준, 한국콘크리트학회, 2007, 327 pp.
  10. ACI 318-99, Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary, An ACI Standard, Reported by ACI Committee 318, American Concrete Institute, 1999, 391 pp.
  11. Frosch, R. J., "Another Look at Cracking and Crack Control in Reinforced Concrete," ACI Structural Journal, Vol. 99, No. 3, 1999, pp. 437-442.
  12. Broms, B. B., "Crack Width and Crack Spacing in Reinforced Concrete Members," ACI Journal, Proceeding, Vol. 62, No. 10, 1965, pp. 1237-1255.
  13. Clark, A. P., "Cracking in Reinforced Concrete Flexural Members," ACI Journal, Proceedings, Vol. 27, No. 8, 1956, pp. 851-862.
  14. Hognestad, E., "High-Strength Bars as Concrete Reinforcement- Part 2: Control of Flexural Cracking," Journal, PCA Research and Development Laboratories, Vol. 4, No. 1, 1962, pp. 46-63.
  15. Kaar, P. H. and Hognestad, E., "High-Strength Bars as Concrete Reinforcement-Part 7: Control of Cracking in T-Beam Flanges," Journal, PCA Research and Development Laboratories, Vol. 7, No. 1, 1965, pp. 42-53.
  16. Kaar, P. H. and Mattock, A. H., "High-Strength Bars as Concrete Reinforcement-Part 4: Control of Cracking in TBeam Flanges," Journal, PCA Research and Development Laboratories, Vol. 5, No. 1, 1963, pp. 15-38.
  17. Gergely, P., "Role of Cover and Bar Spacing in Reinforced Concrete," Significant Developments in Engineering Practise and Research: A Tribute to Chester P. Siess, SP-75, American Concrete Institute, Farmington Hills, Mich., 1981, pp. 133-147.
  18. Darwin, D. et al., "Debate: Crack Width, Cover, and Corrosion," Concrete International, Vol. 8, No. 5, 1985, pp. 20-35.
  19. Oesterle, R. G., "The Role of Concrete Cover in Crack Control Criteria and Corrosion Protection," PCA R&D Serial No. 2054, Portland Cement Association, 1997.
  20. MacGregor, J. G. and Wight, J. K., Reinforced Concrete Mechanics and Design, 4th Edition in SI Units, Pearson Prentice Hall, Inc., 2005, 1132 pp.
  21. ACI Committee 318-05, Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), An ACI Standard, American Concrete Institute, Farmington Hills, Michigan 48333-9094, 2005, 430 pp.
  22. KS D 3504:2011 철근콘크리트용 봉강, 지식경제부 제정, 2011, 30 pp.
  23. 한국콘크리트학회, 콘크리트구조설계기준 해설, 기문당, 2008, 523 pp.
  24. 이재훈, 홍건호, "2007년도 개정 콘크리트구조설계기준: 휨과 압축 및 균열제어," 콘크리트학회지, 19권, 4호, 2007, pp. 25-31.
  25. 이재훈, 김진근, "콘크리트구조설계기준(2007)에 따른 균열제어," 콘크리트 학회지, 20권, 6호, 2008, pp. 58-69.
  26. 민창식, 보-슬래브 바닥판 종합설계, 구미서관, 2011, 285 pp.
  27. Nawy, E. G., "Proposed Revisions to Building Code Requirements for Structural Concrete (ACI 318-95) and Commentary (ACI 318R-95)," Discussion on Section 10.6.4, Concrete International, 1999, pp. 318-10-318-12.
  28. Munshi, J., "Proposed Revisions to Building Code Requirements for Structural Concrete (ACI 318-95) and Commentary (ACI 318R-95)," Discussion on Section 10.6.4, Concrete International, 1999, pp. 318-20-318-21.
  29. Committee Closure, "Proposed Revisions to Building Code Requirements for Structural Concrete (ACI 318-95) and Commentary (ACI 318R-95)," Discussion on Section 10.6.4, Concrete International, 1999, pp. 318-37-318-38.
  30. Standard Specifications for Highway Bridges, 17th, Published by the American Association of State Highway and Transportation(AASHTO), 2002, 797 pp.
  31. 민창식, 철근콘크리트공학, 구미서관, 2판 4쇄, 2011, 1017 pp.
  32. 국토해양부 제정 도로교설계기준, 한국도로교통협회, 2010, 602 pp.

Cited by

  1. Maximum Bar Spacing for the Control of Cracking without Direct Calculation in Reinforced Concrete Beams vol.18, pp.6, 2018, https://doi.org/10.9798/KOSHAM.2018.18.6.235