한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제21권4호
  • /
  • Pages.547-555
  • /
  • 2012
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

니켈박판과 다공질니켈박판의 샌드위치 판넬 용접 특성

Characteristics on Sandwich Panel Welding of a Ni Thin Plate and Porous Ni Thin Plate

  • 황찬연 (조선대학교 첨단부품소재공학과) ;
  • 양윤석 (조선대학교 첨단부품소재공학과) ;
  • 유영태 (조선대학교 메카트로닉스공학과)
  • 투고 : 2012.03.07
  • 심사 : 2012.05.30
  • 발행 : 2012.08.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper focuses on the research of the anode and cathode in the Ni-MH secondary battery. In this paper, the proposed method employs a continuous wave Nd : YAG laser based on the pure Ni instead of the low carbon steel to improve the conductivity although the conventional secondary battery is based on the resistance spot welded with low carbon steel SS41. It welds a sandwich panel using the pure Ni and the porous thin plate, and the tested optimal conditions for the laser power and irradiation speed were 300 and 350 Watt, and 1.0~1.6m/min, respectively. Finally, we observed a ratio, heat input and cross-section and measured the conductivity of the welding section to test the weldability.

키워드

참고문헌

  1. Electronics Information Center, 2011, 2011 Secondary Battery Industry Prospect, Korea Electronics Technology Institute, Korea.
  2. Sun, Y. K., 2009, "Battery Technology for HEV," Auto Journal Special Edition 4, Vol. 31, No. 1, pp. 49-54.
  3. Electronics Information Center, 2008, Lithium Secondary Battery Industry Trend, Korea Electronics Technology Institute, Korea.
  4. Electronics Information Center, 2005, Secondary Battery Technology and Trend, Korea Electronics Technology Institute, Korea.
  5. Mukherjee, R., Krishnan, R., Lu, T. M., and Koratkar, N, 2012, "Nanostructured Electrodes for High-power Lithium Ion Batteries," J. of Nano Energy, Vol. 1, Issue. 4, pp. 1-16. https://doi.org/10.1016/j.nanoen.2011.11.005
  6. Mo, Y. W., Yoo, Y. T., Shin, H. J., and Shin, B. H., 2007, "The Characteristics of Butt Welding Nd:YAG Laser with a Continuous Wave of Nickel Coated S45C Steel," J. of KSMTE, Vol. 16, No. 4, pp. 1-12.
  7. Yoo, Y. T., Shin, H. J., and Lim, K. G., 2004, "Welding Characteristics of Inconel 600 using a High Power CW Nd:YAG Laser," J. of KSMTE, Vol. 13, No. 6, pp. 119-126.
  8. Yoo, Y. T., and Shin, H. J., 2007, "Characteristics of CW Nd:YAG Laser Lap Welds of Nickel Coated S45C Steel," J. of KWJS, Vol. 25, No. 3, pp. 18-27.
  9. Phanikumar, G., Dutta, P., and Chattopadhyay, K., 2005, "Continuous Welding of Cu-Ni Dissimilar Couple using CO2 Laser," J. of Science and Technology of Welding and Joining, Vol. 10, No. 2, pp. 158-166. https://doi.org/10.1179/174329305X36043
  10. Liu, X. B., Yu, G., Guo, J., Gu, Y. J., Pang, M., Zheng, C. Y., and Wang, H. H., 2008, "Research on Laser Welding of Cast Ni-based Superalloy K418 Turbo Disk and Alloy Steel 42CrMo Shaft," J. of Alloys and Compounds, Vol. 453, No. 1-2, pp. 371-378. https://doi.org/10.1016/j.jallcom.2006.11.152
  11. Lim, Y. S., Kim, H. P., Cho, H. D., and Lee, H. H., 2009, "Microscopic Examination of an Alloy 600/182 Weld," J. of Materials Characterization, Vol. 60, No. 12, pp. 1496-1506. https://doi.org/10.1016/j.matchar.2009.08.005