References
- Spina, R., "Injection Moulding of Automotive Components: Comparison between Hot Runner System for a Case Study," Journal of Materials Processing Technology, Vol. 155-156, No. 12, pp. 1497-1504, 2004. https://doi.org/10.1016/j.jmatprotec.2004.04.359
- Park, K., Sohn, D. H., and Seo, Y. S., "Investigation of Weldline Strength with Various Heating Conditions," J. of the KSPE, Vol. 27, No. 1, pp. 105-112, 2010.
- Lee, S. H., Kang, J. J., Lee, J. W., Hong, S. K., Ko, J. S., Lee, J. H., and Noh, J. W., "Slicon Injection Mold & Molding Technology for Super-hydrophobic Curved Surface," J. of the KSPE, Vol. 29, No. 1, pp. 13-18, 2012. https://doi.org/10.7736/KSPE.2012.29.1.013
- Dalgarno, K. W. and Stewart, T. D., "Manufacture of Production Injection Mould Tooling Incorporating Conformal Cooling Channels via Indirect Selective Laser Sintering," Proceedings of Institution of Mechanical Engineers Part B: Journal Engineering Manufacture, Vol. 215, No. 10, pp. 1323-1332, 2001. https://doi.org/10.1243/0954405011519042
- Ahn, D. G., Park, M. W., Park, S. W., and Kim, H. S., "Design of the Conformal Cooling Channels of the Mould for the Plastic Part of the Refrigerator via Three-dimensional Injection Moulding Analysis," Transactions of the Korean Society of Mechanical Engineers A, Vol. 34, No. 10, pp. 1487-1492, 2010. https://doi.org/10.3795/KSME-A.2010.34.10.1487
- Hong, M., Lee, J., and Shin, S., "A Study on the Improvement of Double Injection-molding Keypad Process," Journal of Korean Society of Manufacturing Technology Engineers, Vol. 20, No. 5, pp. 659-665, 2011.
- Ahn, D. G., "Application of Laser Assisted Metal Rapid Tooling Process to Manufacture of Molding & Forming Tools - State of the Art," Int. J. Precis. Eng. Manuf., Vol. 12, No. 5, pp. 925-938, 2011. https://doi.org/10.1007/s12541-011-0125-5
- Akay, M. and Ozden, S., "Prediction of Process-Induced Warpage in Injection Molded Thermoplastics," Polymer Engineering and Science, Vol. 36, No. 13, pp. 1839-1846, 1996. https://doi.org/10.1002/pen.10579
- Yang, S. S. and Kwon, T. H., "Deformation Analysis of Injection Molded Articles due to In-mold Residual Stress and Cooling after Ejection," Proceedings of Spring Annual Meeting of Korean Society of Mechanical Engineers, pp. 251-256, 2001.
- Kabanemi, K. K., Vailancourt, H., Wang, H., and Salloum, G., "Residual Stresses, Shrinkage, and Warpage of Complex Injection Molded Products: Numerical Simulation and Experimental Validation," Polymer Engineering and Science, Vol. 38, No. 1, pp. 21-37, 1998. https://doi.org/10.1002/pen.10162
- Choi, D. S. and Im, Y. T., "Prediction of Shrinkage and Warpage in Consideration of Residual Stress in Integrated Simulation of Injection Molding," Composite Structures, Vol. 47, No. 1-4, pp. 655-665, 1999. https://doi.org/10.1016/S0263-8223(00)00045-3
- Chen, X., Lam, Y. C., and Li, D. Q., "Analysis of Thermal Residual Stress in Plastic Injection Molding," Journal of Materials Processing Technology, Vol. 101, No. 1-3, pp. 275-280, 2000. https://doi.org/10.1016/S0924-0136(00)00472-6
- Ferreira, J. C. and Mateus, A., "Studies of Rapid Soft Tooling with Conformal Cooling Channels for Plastic Injection Molding," Journal of Materials Processing Technology, Vol. 142, No. 2, pp. 508-516, 2003. https://doi.org/10.1016/S0924-0136(03)00650-2
- Park, C. H., Ahn, H. J., Choi, D. H., and Pyo, B. G., "Two-stage Design Optimization of an Automotive Fog Blank Cover for Enhancing Its Injection Molding Quality," Transactions of the Korean Society of Mechanical Engineers A, Vol. 34, No. 8, pp. 1097-1103, 2010. https://doi.org/10.3795/KSME-A.2010.34.8.1097
- Hilton, P. D. and Jacobs, P. E., "Rapid Tooling: Technologies and Industrial Applications," Marcel Dekker Inc., 2000.
- Sachs, E., Wylonis, E., Allen, S., Cima, M., and Guo, H., "Production of Injection Molding Tooling with Conformal Cooling Channels Using the Three Dimensional Printing Process," Polymer Engineering and Science, Vol. 40, No. 5, pp. 1232-1247, 1996.
- Ahn, D. G., Park, S. H., and Kim, H. S., "Manufacture of an Injection Mould with Rapid and Uniform Cooling Characteristics for the Fan Parts Using a DMT Process," Int. J. Precis. Eng. Manuf., Vol. 11, No. 6, pp. 915-924, 2010. https://doi.org/10.1007/s12541-010-0111-3
- Kuo, C. F. J. and Su, T. L., "Optimization of Injection Molding Processing Parameters for LCD Light-Guide Plates," Journal of Materials Engineering and Performance, Vol. 16, No. 5, pp. 539-548, 2007. https://doi.org/10.1007/s11665-007-9088-1
- Wang, G., Zhao, G., Li, H., and Guan, Y., "Research on a New Variotherm Injection Molding Technology and Its Application on the Molding of a Large LCD Panel," Polymer-Plastic Technology Engineering, Vol. 48, No. 7, pp. 671-681, 2009. https://doi.org/10.1080/03602550902824549
- Jacques, M. S., "An Analysis of Thermal Warpage in Injection Molded Flat Parts Due to Unbalanced Cooling," Polymer Engineering and Science, Vol. 22, No. 4, pp. 241-247, 1982. https://doi.org/10.1002/pen.760220405
- Park, S. J. and Kwon, T. W., "Optimal Cooling System Design for the Injection Molding Process," Polymer Engineering and Science, Vol. 38, No. 9, pp. 1450-1462, 1998. https://doi.org/10.1002/pen.10316
- Huang, M. C. and Tai, C. C., "The Effective Factors in the Warpage Problem of an Injection-molded Part with a Thin Shell Feature," Journal of Materials Processing Technology, Vol. 110, No. 1, pp. 1-9, 2001. https://doi.org/10.1016/S0924-0136(00)00649-X
- Kim, C. H. and Youn, J. R., "Determination of Residual Stresses in Injection-moulded Flat Plate: Simulation and Experiments," Polymer Testing, Vol. 26, No. 7, pp. 862-868, 2007. https://doi.org/10.1016/j.polymertesting.2007.05.006
- Shin, J. K., Min, B. K., Kim, Y. J., and Kang, S., "Minimization of Weld Lines in Two Shot Molded Parts with Microlenses," Transactions of Materials Processing, Vol. 13, No. 3, pp. 230-235, 2004. https://doi.org/10.5228/KSPP.2004.13.3.230
- Kim, O. R., Cha, B. S., Lee, S. Y., Kim, Y. G., and Woo, C. K., "A Study on the Runner and Gate Consequence of Manufacture Double Shot Molding Using CAE," Transactions of Materials Processing, Vol. 18, No. 2, pp. 160-165, 2009. https://doi.org/10.5228/KSPP.2009.18.2.160
- Yoon, G. S., Lee, J. W., Seo, T. I., Kim, Y. J., and Lee, J. B., "A Study on the Analysis of Multi-cavity Co-injection Molding Characteristics by CAE Method," Proceedings of Spring Annual Meeting of Korean Society of Precision Engineering, pp. 451-452, 2011.
- Ahn, D. G., Park, M. W., and Kim, H. S., "Selection of Double Shot Moulding Conditions via Injection Moulding Analysis," Proceedings of Spring Annual Meeting of Korean Society of Precision Engineering, pp. 1195-1196, 2010.
- Ahn, D. G., Park, M. W., and Kim, H. S., "Design of Cooling System for Multi-Sliced Mould with Volumetric Heat Sink via Three-Dimensional Injection Moulding Analysis," Proceedings of Autumn Annual Meeting of Korean Society of Precision Engineering, pp. 883-884, 2010.
- Born, M. and Wolf, E., "Principles of Optics, 7th ed.," Cambridge University Press, pp. 517-521, 1990.
Cited by
- A study on the Powder Injection Molding of Translucent Alumina via Flowability Simulation of Powder/Binder Mixture vol.21, pp.3, 2014, https://doi.org/10.4150/KPMI.2014.21.3.215
- A Study on Decision of gate location for Injection molding of Automobile air cleaner Upper cover vol.16, pp.7, 2015, https://doi.org/10.5762/KAIS.2015.16.7.4411